Casio Exilim EX ZR100 User Manual

							161Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Language
.Specify the display language you want.
1Select the tab on the right.
2Select “Language”.
3Select the language you want.
• Camera models sold in certain geographic areas 
may not support display language selection.
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed 
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is 
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
– During a slideshow
– During movie recording and playback
– When both sleep and Auto Power Off are turned on, Auto Power Off takes 
priority.
Specifying the Display Language (Language)
Configuring Sleep State Settings (Sleep)
1
23
Downloaded From camera-usermanual.com Casio Manuals 
						

							162Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for 
a preset amount of time.
Trigger Time Settings: 2 min, 5 min, 10 min (The trigger time is always 5 minutes in 
the PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During CS group playback
– During movie recording and playback
Procedure
[MENU] * Set Up Tab * REC/PLAY
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC 
mode or [p] (PLAY) in the PLAY mode.
• Change this setting to “Power On” or “Power On/Off” before connecting to a TV for 
image viewing.
Configuring Auto Power Off Settings (Auto Power Off)
Configuring [r] and [p] Settings (REC/PLAY)
Power OnCamera turns on whenever [r] (REC) or [p] (PLAY) is 
pressed.
Power On/OffCamera turns on or off whenever [r] (REC) or [p] (PLAY) is 
pressed.
DisableCamera does not turn on or off when [r] (REC) or [p] (PLAY) 
is pressed.
Downloaded From camera-usermanual.com Casio Manuals 
						

							163Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is 
used when exchanging data with a computer, printer, or other external device.
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video 
output system. You can also specify an aspect ratio of 4:3 or 16:9.
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use. 
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting 
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC 
or PAL.
Configuring USB Protocol Settings (USB)
Mass StorageSelect this setting when connecting to a computer (pages 137, 
148). With this setting, the computer sees the camera as an 
external storage device. Use this setting for normal transfer of 
images from the camera to a computer.
PTP 
(PictBridge)Select this setting when connecting to a printer that supports 
PictBridge (page 127).
Selecting the Screen Aspect Ratio and Video Output System 
(Video Out)
NTSCVideo system used in Japan, the U.S., and other countries
PALVideo system used in Europe and other areas
4:3Normal TV screen aspect ratio
16:9Wide screen aspect ratio
Downloaded From camera-usermanual.com Casio Manuals 
						

							164Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * HDMI Output
• See page 110 for details.
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p] 
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the 
special startup image provided in the camera’s built-in memory.
• Formatting built-in memory (page 165) will delete the current startup image setting.
• You can select the first snapshot of a CS group as the startup image. If you want to 
select another image within a CS group, you need to first divide up the CS group or 
use the CS Frame Edit feature to make a copy of the image outside of the CS 
group.
Selecting the HDMI Terminal Output Method (HDMI Output)
Configuring a Startup Image (Startup)
Downloaded From camera-usermanual.com Casio Manuals 
						

							165Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card. 
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in 
memory. It cannot be undone. Make sure you do not need any data currently on 
the card or in built-in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected images
– BEST SHOT user setups
– Startup screen
• Formatting a memory card will delete the following data.
– Protected images
• Check the battery level before starting a format operation and make sure it is not 
too low. Formatting may not be performed correctly and the camera may stop 
operating normally if the camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in progress. Doing so can cause 
the camera to stop operating normally.
Procedure
[MENU] * Set Up Tab * Reset
See page 181 for details about the camera’s factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language, video output
Formatting Built-in Memory or a Memory Card (Format)
Resetting the Camera to Factory Defaults (Reset)
Downloaded From camera-usermanual.com Casio Manuals 
						

							166Configuring Monitor Screen Settings
Configuring Monitor Screen Settings
Each press of [8] (DISP) will cycle through display settings that display or hide on-
screen information and the control panel. You can configure separate settings for the 
REC mode and PLAY mode.
• The control panel is not displayed during movie recording.
Displays a histogram on the monitor screen which you can use to 
check the exposure of an image before you shoot it. You also can 
display the histogram in the PLAY mode for information about the 
exposure levels of images.
NOTE
• A centered histogram does not necessarily guarantee optimum exposure. The 
recorded image may be over-exposed or under-exposed, even though its 
histogram is centered.
• Due to the limitations of exposure compensation, you may not be able to achieve 
an optimum histogram configuration.
• Use of the flash and certain shooting conditions can cause the histogram to 
indicate exposure that is different from the actual exposure of the image when it is 
shot.
• The histogram cannot be displayed during high speed movie recording.
Turning Display Information On and Off (Info)
Information on, 
control panel onDisplays setting information and the control panel.
Information on, 
control panel on, 
histogram onDisplays setting information and the 
control panel, and a histogram (page 166) 
on the left side of the display. Also 
displays the remaining movie recording 
time as well as a movie image quality 
icon.
Information off, 
control panel offHides setting information and the control panel.
Using the On-screen Histogram to Check Exposure 
(+Histogram)
Histogram
Histogram
Downloaded From camera-usermanual.com Casio Manuals 
						

							167Configuring Monitor Screen Settings
A histogram is a graph that represents the lightness of an image in terms of the 
number of pixels. The vertical axis indicates the number of pixels, while the horizontal 
axis indicates lightness. If the histogram appears too lopsided for some reason, you 
can use EV shift to move it left or right in order to achieve better balance. Optimum 
exposure can be achieved by EV shifting so the graph is as close to the center as 
possible. For snapshots, you can even display individual histograms for R (red), 
G (green), and B (blue).
Example Histograms
How to Use the Histogram
A histogram towards the left side results when the 
overall image is dark. A histogram that is too far to 
the left may result in “black out” of the dark areas 
of an image.
A histogram towards the right side results when 
the overall image is light. A histogram that is too 
far to the right may result in “white out” of the light 
areas of an image.
An overall well-balanced histogram results when 
the overall image is at optimal lightness.
Downloaded From camera-usermanual.com Casio Manuals 
						

							168Appendix
Appendix
.Avoid Use While In Motion
• Never use the camera to record or play back images while operating an automobile 
or other vehicle, or while walking. Looking at the monitor while in motion creates 
the risk of serious accident.
.Flash
• Never use the flash unit in areas where flammable or explosive gas may be 
present. Such conditions create the risk of fire and explosion.
• Never fire the flash in the direction of a person operating a motor vehicle. Doing so 
can interfere with the driver’s vision and creates the risk of accident.
• Never fire the flash too close to the eyes of the subject. Doing so creates the risk of 
loss of eyesight.
.Monitor Screen
• Should the monitor screen ever become cracked, never touch any of the liquid 
inside the monitor screen. Doing so creates the risk of skin inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse your 
mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin, immediately 
rinse with clean water for at least 15 minutes and contact your physician.
.Connections
• Never plug any devices that are not specified for use with this camera into 
connectors. Connecting a non-specified device creates the risk of fire and electric 
shock.
.Transport
• Never operate the camera inside of an aircraft or anywhere else where operation of 
such devices is restricted. Improper use creates the risk of serious accident.
Precautions during Use
Downloaded From camera-usermanual.com Casio Manuals 
						

							169Appendix
.Smoke, abnormal odor, overheating, and other abnormalities
• Continued use of the camera while it is emitting smoke or strange odor, or while it 
is overheating creates the risk of fire and electric shock. Immediately perform the 
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera, taking care to protect yourself against burn 
injury.
3. Contact your dealer or nearest CASIO authorized service center.
.Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal) getting inside the camera 
creates the risk of fire and electric shock. Immediately perform the following steps 
whenever any of the above symptoms are present. Particular care is required when 
using the camera where it is raining or snowing, near the ocean or other body of 
water, or in a bathroom.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
.Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping or other rough 
treatment creates the risk of fire and electric shock. Immediately perform the 
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
.Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and creates the risk 
of fire and electric shock.
.Disassembly and Modification
• Never try to take the camera apart or modify it in any way. Doing so creates the risk 
of electric shock, burn injury, and other personal injury. Be sure to leave all internal 
inspection, maintenance, and repair up to your dealer or nearest CASIO authorized 
service center.
Downloaded From camera-usermanual.com Casio Manuals 
						

							170Appendix
.Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so creates 
the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed 
vehicle parked in the sun, or other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high shelf, etc. Doing so can 
cause the camera to fall, creating the risk of personal injury.
.Backing Up Important Data
• Always keep backup copies of important data in camera memory by transferring it 
to a computer or other storage device. Note that data can be deleted in the case of 
camera malfunction, repair, etc.
.Memory Protection
• Whenever replacing the battery, be sure to follow the correct procedure as 
described in the documentation that comes with the camera. Incorrectly replacing 
the battery can result in corruption or loss of data in camera memory.
.Rechargeable Battery
• Use only the specified charger unit or the specified device to charge the battery. 
Attempting to charge the battery by an unauthorized means creates the risk of 
battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing so can 
damage the battery, and cause deterioration of its performance and loss of service 
life.
• The battery is intended for use with a CASIO Digital Camera only. Use with any 
other device creates the risk of the battery damage, or deterioration of battery 
performance and service life.
• Failure to observe any of the following precautions creates the risk of battery 
overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose the battery to heat or fire.
– Make sure the battery is oriented correctly when it is connected to the charger 
unit.
– Never carry or store the battery together with items that can conduct electricity 
(necklaces, pencil lead, etc.)
– Never disassemble the battery, pierce it with a needle, or expose it to strong 
impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never 
place the battery into a microwave oven, heater, high-pressure generating 
device, etc.
• Should you ever notice leakage, strange odor, heat generation, discoloration, 
deformation, or any other abnormal condition while using, charging, or storing a 
battery, immediately remove it from the camera or charger unit and keep it away 
from open flame.
Downloaded From camera-usermanual.com Casio Manuals