Casio Exilim EX ZR100 User Manual

							121Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotation
1.Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2.When the displayed image is at the orientation you want, press 
[MENU].
NOTE
• Rotating a CS image causes all of the images in the CS group to be rotated. You 
cannot rotate individual component image in a CS group.
• Rotation of a panorama image is not supported.
• Note that this procedure does not actually change the image data. It simply alters 
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu 
screen.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. 
The original snapshot is also retained. You can resize an image to one of three sizes: 
8M, 5M, VGA.
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of 
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the 
recording date of the original snapshot.
Rotating an Image (Rotation)
Resizing a Snapshot (Resize)
Downloaded From camera-usermanual.com Casio Manuals 
						

							122Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming
You can crop a snapshot to trim parts you do not need, and 
save the result in a separate file. The original snapshot is 
also retained.
Use the zoom controller to zoom the image to the size you 
want, use [8], [2], [4], and [6] to display the portion of 
the image you want to cut out, and then press [SET].
• The image produced by cropping a 3:2 or 16:9 image will 
have an aspect ratio of 4:3.
• The recording date of the cropped image will be the 
same as the recording date of the original snapshot.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a 
memory card to built-in memory.
NOTE
• You can copy snapshots or movies you recorded with this camera.
Cropping a Snapshot (Trimming)
Copying Files (Copy)
Built-in * 
CardCopies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It cannot be 
used to copy a single file.
Card * 
Built-inCopies a single file on the memory card to camera built-in camera 
memory. Files are copied to the folder in built-in memory whose 
name has the largest serial number.
• You cannot copy a continuous shutter (CS) group image (page 
105).
1Use [4] and [6] to select the file you want to copy.
2Use [8] and [2] to select “Copy” and then press [SET].
Represents
snapshot area
Part of snapshot that is
currently displayed
Zoom factor
Downloaded From camera-usermanual.com Casio Manuals 
						

							123Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Divide Group
See page 104 for details.
Procedure
[p] (PLAY) * Display CS group. * [MENU] * PLAY Tab * 
CS Multi Print
1.Use [8] and [2] to select “Create”.
• You can use [4] and [6] to select a different CS group, if you want.
2.Press [SET].
This converts the CS group to a 12M (4000x3000) image with up to 30 CS 
frames (5 vertical x 6 horizontal).
• This camera may not be able to correctly convert a CS group image with 
another camera.
• The recording date of the converted image will be the same as the recording 
date of the original CS group.
• When converting a CS group whose images have been rotated by the 
“Rotation” feature to a CS Multi Print image, the arrangement of the images in 
the CS Multi Print will be different from that of normal (unrotated) CS images.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * CS Frame Edit
See the following pages for details.
DPOF Printing: page 131
Protect: page 118
Copy: page 105
Delete: page 102
Dividing Up a Continuous Shutter Group (Divide Group)
Combining CS Images into a Single Still Image 
(CS Multi Print)
Editing a CS Image (CS Frame Edit)
Downloaded From camera-usermanual.com Casio Manuals 
						

							124Dynamic Photo
Dynamic Photo
This camera comes with a number of subjects in built-in 
memory (“built-in subjects”), which you can insert into 
snapshots and movies to create Dynamic Photo images.
• The term “built-in subjects” refers to the moving figures 
and characters that came pre-programmed in the 
camera’s built-in memory.
Use the following procedure to insert a built-in subject image into a snapshot (except 
for a panorama image) or movie.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Dynamic Photo
1.Use [4] and [6] to select the background image you want and then 
press [SET].
• Only an image that satisfies the following conditions can be used as a 
background image.
– A snapshot or movie recorded with this camera or a snapshot transferred to 
this camera’s memory using Photo Transport (page 143)
– A snapshot with an aspect ratio of 4:3
2.Use [4] and [6] to select the built-in subject that you want to insert 
into the image and then press [SET].
Inserting a Built-in Subject into a Snapshot or Movie 
(Dynamic Photo)
™
Built-in Subject Another Image Dynamic Photo Image
Downloaded From camera-usermanual.com Casio Manuals 
						

							125Dynamic Photo
3.If you are inserting a subject into a movie an 
image will appear on the monitor screen 
showing the approximate location of the 
subject in the movie. Use [4] and [6] to shift 
the location to the position you want. After you 
are finished, press [SET].
• If you insert a subject into a movie, the resulting movie will be a maximum of 
20 seconds long. Everything before and after the insertion is cut off. If the 
movie you are inserting into (original movie) is shorter than 20 seconds, the 
resulting movie will be the same length as the original movie.
• If you are inserting a subject into a snapshot, skip directly to step 4.
4.Use the zoom controller to adjust the size of the subject and use [8], 
[2], [4], and [6] to adjust its position.
5.When everything is the way you want, press [SET].
This inserts the subject into another image and creates a Dynamic Photo.
• Inserting an animated subject into a snapshot will save a Dynamic Photo that 
consists of 20 still images of 2M size or smaller.
• Inserting a subject into a movie will save the Dynamic Photo as a movie file.
NOTE
• Performing a delete or format operation will not delete the built-in subjects.
Insert location
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							126Dynamic Photo
1.Press [p] (PLAY) and then use [4] and [6] to display the Dynamic 
Photo you want to view.
2.If you want to see the subject in the Dynamic Photo movie, press [SET].
The Dynamic Photo is repeated as a continuous loop.
• Movement of the subject also will start automatically about two seconds after 
you display a Dynamic Photo.
A Dynamic Photo with a still image background and a moving subject is stored as a 
series of 20 still images. You can use the following procedure to convert the 20 
images that make up a Dynamic Photo to a movie.
Procedure
[p] (PLAY) * Dynamic Photo Screen * [MENU] * PLAY Tab * 
Movie Converter
• The final movie format is H.264/AVC standard.
• The final movie image size is 640x480 pixels.
To view a Dynamic Photo (Dynamic Photo File)
Converting a Dynamic Photo Still Image to a Movie 
(Movie Converter)
Downloaded From camera-usermanual.com Casio Manuals 
						

							127Printing
Printing
• You can specify which images you want to print, the number of copies, and date 
stamp settings before printing (page 130).
You can connect the camera directly to a printer that supports PictBridge and print 
images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you want 
to print to a professional print service and have them printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print 
images directly from a memory card. For details, see the user 
documentation that comes with your printer.
Connecting Directly to a PictBridge Compatible 
Printer
You can print on a printer that supports PictBridge (page 
127).
Printing with a Computer
After transferring the images to your computer, use 
commercially available software to print.
Connecting Directly to a PictBridge Compatible Printer
Downloaded From camera-usermanual.com Casio Manuals 
						

							128Printing
.Connecting the Camera to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to 
your printer’s USB port.
• The camera does not draw power over the USB cable. Check the battery level 
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you feel it 
click securely into place. Failure to insert the connector fully can result in poor 
communication or malfunction.
• Note that even while the connector is fully inserted, you still 
will be able to see the metal part of the connector as shown 
in the illustration.
• When connecting the USB cable to a USB port, make sure 
you align the connector correctly with the port.
• Make sure that the camera is turned off before plugging in or 
unplugging the cable. Check the user documentation that 
comes with the printer for information about requirements 
before plugging into or unplugging from the printer.
USB
USB cable (included with camera)
USB port[USB/AV] port
Making sure that the 6 mark on the camera is aligned 
with the 4 mark of the USB cable connector, connect 
the cable to the camera. Large connector
Small connector
Terminal cover
Downloaded From camera-usermanual.com Casio Manuals 
						

							
129Printing
.To print
1.Turn on the printer and load paper.
2.Turn on the camera.
This will display the print menu screen.
3.Use [ 8] and [ 2] to select “Paper Size”, and then press [ 6].
4.Use [ 8] and [ 2] to select a paper si ze and then press [SET].
• The following are the  available paper sizes.
3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer
• Selecting “By Printer” prints usi ng a paper size selected on the printer.
• See the documentation that comes with your printer for information about  paper settings.
5.Use [ 8] and [ 2] to specify the print option you want.
• To toggle date stamping on and off, press [ 0] (Movie). The date stamp will be 
printed when “On” is indicated on the monitor screen.
6.Use [ 8] and [ 2] to select “Print”  and then press [SET].
Printing will start and the message “Bu sy... Please wait...” will appear on the 
monitor screen. The message will disappear after a short while, even though 
printing is still being performed. Pr essing any camera button will cause the 
printing status to re-appear. The print menu screen will re-appear when printing is 
complete. • If you selected “1 Image”, you can repeat the procedure from step 5, if you 
want.
7.After printing is complete, turn off the camera and disconnect the USB 
cable from the printer and camera.
1  Image : Prints one image. Select and then press [SET]. Next, use [ 4] and 
[ 6 ] to select the image you want to print.
DPOF Printing : Prints multiple images. Select and then press [SET]. With this  option, images will be printed in  accordance with DPOF settings 
(page 130).
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
130Printing
.Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy, 
and time stamp on/off information on the memory card with the images. 
After configuring settings,  you can use the memory card to print on a home 
printer that supports DPOF or take the memory card to a professional print 
service. • Whether or not you will be able to use  DPOF settings for printing depends on the 
printer you are using.
• Some professional print serv ices may not support DPOF.
.Configuring DPOF Settings Individually for Each Image
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
DPOF Printing  * Select images
1.Use [ 4] and [ 6] to scroll through the files until the image you want to 
print is displayed.
2.Use [ 8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [ 0] (Movie) so “On” is 
shown for date stamping.
• Repeat steps 1 and 2 to configure setti ngs for other images, if you want.
3.Press [SET].
Using DPOF to Specify Images to be Printed and the Number 
of Copies
B
Downloaded From camera-usermanual.com Casio Manuals