Casio Exilim EX ZR100 User Manual

							91Advanced Settings
Tips for Best Face Detection Results
• The camera performs center focus if it cannot detect a face.
• Always make sure that Auto Focus (AF) is selected as the focus mode when 
shooting with face detection.
• Detection of the following types of faces is not supported.
– A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
– A profile or a face that is at an angle
– A face that is very far away and small, or very close and large
– A face in an area that is very dark
– A face of a pet or some other non-human subject
IMPORTANT!
• Face detection cannot be used in combination with any of the following features.
– Some BEST SHOT scenes
– Movie Mode (Including some BEST SHOT scenes that support High Speed 
Movie recording)
– High Speed CS with Prerecord CS (Including some BEST SHOT scenes that 
support High Speed CS recording)
• The “Focus” setting is always fixed at Q (Auto Focus) whenever “Face Detection” 
is being used. If you want to change the “Focus” setting, first select “Off” for “Face 
Detection”.
Procedure
[r] (REC) * [MENU] * REC Tab * Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is 
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the 
screen.
Shooting with Continuous Auto Focus (Continuous AF)
Downloaded From camera-usermanual.com Casio Manuals 
						

							92Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * CS
Perform the following steps to change the continuous shutter mode.
Procedure
[r] (REC) * [MENU] * REC Tab * Digital Zoom
Select “On” when you want to use digital zoom (page 46).
• Digital zoom is disabled while shooting with the following feature.
– High speed movie recording
Changing the Continuous Shutter Mode (CS)
 High Speed CS
Enables shooting of up to 30 continuous shutter images. See page 49 for 
details.
 F CS
Supports continuous shutter recording of up to 30 images, using the mechanical 
shutter only. See page 53 for details.
Turning Digital Zoom On or Off (Digital Zoom)
Š
á
Downloaded From camera-usermanual.com Casio Manuals 
						

							93Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * L/R Key
You can assign one of the seven functions listed below to the [4] and [6] keys.
Procedure
[r] (REC) * [MENU] * REC Tab * Grid
The on-screen grid can be displayed on the REC mode 
monitor screen for easy vertical and horizontal alignment 
when composing images.
Assigning Functions to the [4] and [6] Keys (L/R Key)
Setting[4]/[6] key operation
Q*´*
Á*)Selecting a Focus Mode (page 84)
•W (Manual Focus) cannot be selected.
Metering Changes the Metering Mode (page 97)
Self-timer Sets the self-timer time (page 87)
Face Detection Turns face detection on and off (page 90)
ISO Specifying ISO Sensitivity (page 40)
White Balance Adjusting White Balance (page 41)
EV Shift Correcting Image Brightness (page 42)
Off Cancels [4] and [6] key assignments
Displaying the On-screen Grid (Grid)
Downloaded From camera-usermanual.com Casio Manuals 
						

							94Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a image for about one second 
immediately after you press the shutter button to record it.
• Image review is available only when shooting single images. It does not work with 
continuous shutter.
Procedure
[r] (REC) * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for 
certain icons when you switch between REC functions.
Functions Supported by Icon Help
• Recording mode
• Available options for the “L/R Key” setting
• Exposure warning when shutter button is half-pressed
Turning on Image Review (Review)
Using Icon Help (Icon Help)
Downloaded From camera-usermanual.com Casio Manuals 
						

							95Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Memory
This setting lets you specify which camera settings should be remembered by the 
camera when it is turned off, and restored the next time the camera is turned on. To 
have the camera remember a setting, you should enable the setting’s memory. Any 
setting whose memory is disabled will be reset to its initial default any time the 
camera is turned off.
*Optical zoom setting only.
Configuring Power On Default Settings (Memory)
SettingDisabled (Initial Default Setting)Enabled
Flash Auto
Setting at 
power off FocusQ
 (Auto Focus)
ISO Auto
White Balance Auto WB
EV Shift 0.0
AF Area Spot
Metering Multi
CS High Speed CS
Self-timer Off
Flash Intensity 0
Zoom (SR) Single
Digital Zoom On
MF Position Position before manual focus was selected.
Zoom Position
*Full wide
Downloaded From camera-usermanual.com Casio Manuals 
						

							96Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot)
• The “Fine” setting helps to bring out details when shooting dense tree branches or 
leaves, a complex pattern, etc.
• Memory capacity (the number of images you can record) will be affected by the 
quality settings you configure (page 191).
Procedure
[r] (REC) * [MENU] * Quality Tab * » Quality (Movie)
This setting can be used to configure movie image quality settings and to select either 
normal movie recording or High Speed Movie recording.
Image Quality Settings (Quality)
Specifying Snapshot Image Quality (T Quality (Snapshot))
FineGives image quality priority
NormalNormal
Movie Image Quality Settings (» Quality (Movie))
FHDSelect this setting record high-definition (FHD) movies (page 64). The 
aspect ratio of movies recorded with this setting is 16:9.
STDUse this setting for standard movie recording. Recording with this 
setting is performed using an aspect ratio of 4:3, an image size of 
640x480 pixels, and a frame rate of 30 frames per second. Image 
quality and image size settings cannot be changed (page 61).
HS1000
HS480
HS240
HS30-240The image size of movies recorded with this mode depends on the 
frame rate (recording speed (page 64)).
Downloaded From camera-usermanual.com Casio Manuals 
						

							97Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * MeteringThe metering mode determines what part of the subject is metered for exposure.
Procedure
[r] (REC) * [MENU] * Quality Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas 
when shooting images.
Specifying the Metering Mode (Metering)
 MultiMulti-pattern metering divides the image into sections and measures 
the light in each section for a balanced exposure reading. This type 
of metering provides error-free exposure settings for a wide range of 
shooting conditions.
 Center 
WeightedCenter weighted metering concentrates on the center of the focus 
area to measure light. This type of metering is best when you want 
some level of control over contrast.
 SpotSpot metering takes readings at a very small area. Use this metering 
method when you want exposure to be set according to the 
brightness of a particular subject, without being affected by 
surrounding conditions.
Optimizing Image Brightness (Lighting)
OnPerforms brightness correction. When this option is selected, it takes 
longer for the image to be stored after the shutter button is pressed.
OffDoes not perform brightness correction.
B
N
˜
Downloaded From camera-usermanual.com Casio Manuals 
						

							98Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Intensity
You can specify flash intensity to one of five levels from +2 (brightest flash) to –2 
(least bright flash).
• Flash intensity may not change when the subject is too far away or too close.
Procedure
[r] (REC) * [MENU] * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Procedure
[r] (REC) * [MENU] * Quality Tab * Sharpness
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
Procedure
[r] (REC) * [MENU] * Quality Tab * Saturation
You can specify one of five saturation settings from +2 (most saturated) to –2 (least 
saturated).
Procedure
[r] (REC) * [MENU] * Quality Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and 
dark) to –2 (least contrast between light and dark).
Specifying Flash Intensity (Flash Intensity)
Using Built-in Color Filters (Color Filter)
Controlling Image Sharpness (Sharpness)
Controlling Color Saturation (Saturation)
Adjusting Image Contrast (Contrast)
Downloaded From camera-usermanual.com Casio Manuals 
						

							99Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 28 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [SET] to start playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/fast 
reverse[4] [6] (Playback in progress.)
• Each press of either button increases the speed of the 
fast forward or fast reverse operation.
• To return to normal playback speed, press [2].
Play/pause[SET]
1 frame forward/
back[4] [6] (Playback paused.)
• Holding down either button scrolls continuously.
Volume adjustmentPress [2] and then press [8] [2]
• Volume can be adjusted only while movie playback is in 
progress.
Information display 
on/off[8] (DISP)
ZoomSlide the zoom controller in the direction of z ([).
• You can use [8], [2], [4], and [6] to scroll the zoomed 
image on the monitor screen. You can zoom a movie 
image up to 4.5 times normal size.
Stop playback[MENU]
Movie icon: »
Image quality Recording time
Downloaded From camera-usermanual.com Casio Manuals 
						

							100Viewing Snapshots and Movies
1.Press [p] (PLAY), and then use [4] and [6] to 
display the panorama images you want to 
view.
2.Press [SET] to start playback of the panorama.
Panorama playback causes the image to scroll left, 
right, up, or down.
Playback Controls
• The following functions cannot be performed on a panorama image.
Dynamic Photo, Movie Converter, MOTION PRINT, Movie Editing, Trimming, 
Resize, Lighting, White Balance, Brightness, Rotation
Viewing a Panorama Image
To start or pause 
playback[SET]
To advance scroll 
while paused[4] [6] (When the slide direction is left or right.)
[8] [2] (When the slide direction is up or down.)
• Holding down any button scrolls continuously.
To hide or show 
display information[8] (DISP)
To stop playback[MENU]
Downloaded From camera-usermanual.com Casio Manuals