Casio Exilim EX ZR100 User Manual

							101Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) operation, the camera creates a CS 
group that includes all of the images for that particular CS session. You can use the 
following procedure to play back the images in a particular CS group.
1.Press [p] (PLAY) and then use [4] and [6] to display the CS group 
whose images you want to view.
2.About one second after you select a CS group, high speed playback of 
its images will start automatically.
• After playback of a CS Group is complete, the first image of the group will be 
displayed on the monitor screen.
• Pressing [SET] will pause playback. While playback is paused, you can adjust 
the playback speed, specify the playback direction, scroll forward or back, 
zoom images, and delete images.
Viewing Continuous Shutter Images
Number of image files in
the CS group
First image in the CS groupCS group icon
Current image number/number 
of images in the group
CS speed
Playback guide
Downloaded From camera-usermanual.com Casio Manuals 
						

							102Viewing Snapshots and Movies
The following are operations that are supported after you press [SET] to 
start image playback.
You can use the following procedures to delete images while playback is in progress 
or paused.
.Deleting a Specific CS Group File
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [4] and [6] to display the image you want to delete.
4.Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 3 and 4.
• To exit the delete operation, press [MENU].
[4] [6]During playback, changes the playback direction and playback speed.
While playback is paused, scrolls forward or back.
• Playback speed cannot be adjusted while the displayed image is 
zoomed.
[SET]Toggles between pause and play.
Zoom 
controllerZooms the image.
• You can use [8], [2], [4], and [6] to scroll the zoomed image on 
the monitor screen.
• Sliding the zoom controller towards w (]) while an image is not 
zoomed will display a menu of images in the current CS group.
[MENU]Exits CS group playback.
[8] (DISP)Cycles through information display formats.
[2]Displays the “CS Frame Edit” menu.
Deleting Continuous Shutter Images
Downloaded From camera-usermanual.com Casio Manuals 
						

							103Viewing Snapshots and Movies
.Deleting Multiple Files in a CS Group
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [8] and [2] to select “Delete Frames” and then press [SET].
• This displays a file selection screen.
4.Use [8], [2], [4], and [6] to move the selection boundary to the file 
you want to delete, and then press [SET].
• This will select the check box of the currently selected file.
5.Repeat step 4 to select other files, if you want. After you are finished 
selecting files, press [MENU].
6.Use [8] and [2] to select “Yes” and then press [SET].
• This deletes the files you selected.
• To cancel the delete operation, select “No” in step 6 and then press [SET].
.Deleting All Files in a CS Group
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [8] and [2] to select “Del Group Images” and then press [SET].
4.Use [8] and [2] to select “Yes”, and then press [SET].
Downloaded From camera-usermanual.com Casio Manuals 
						

							104Viewing Snapshots and Movies
Use the following to divide up a CS Group into individual images.
.Dividing Up a Specific CS Group
1.While a CS group is displayed or while the images of a CS group are 
scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select the “PLAY” tab.
3.Use [8] and [2] to select “Divide Group” and then press [6].
4.Use [4] and [6] to display the CS group you want to divide up.
5.Use [8] and [2] to select “Divide” and then press [SET].
• To divide up other CS group files, repeat steps 4 and 5.
.Dividing Up All CS Groups
IMPORTANT!
• Once a CS group is divided, it cannot be regrouped.
1.While a CS group is displayed or while the images of a CS group are 
scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select the “PLAY” tab.
3.Use [8] and [2] to select “Divide Group” and then press [6].
4.Use [8] and [2] to select “Divide All Groups” and then press [SET].
5.Use [8] and [2] to select “Yes”, and then press [SET].
Dividing Up a CS Group
Downloaded From camera-usermanual.com Casio Manuals 
						

							105Viewing Snapshots and Movies
Use the following procedure to copy an image in a CS group to a location outside of 
the group.
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Copy”, and then press [SET].
3.Use [4] and [6] to display the image you want to copy.
4.Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a CS group. Before 
using either of these functions, perform the above procedure to copy the image 
first.
White Balance, Brightness, Trimming, Rotation, Resize
Copying a CS Group Image
Downloaded From camera-usermanual.com Casio Manuals 
						

							106Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom controller towards z ([) to 
zoom.
You can use [8], [2], [4], and [6] to scroll the zoomed 
image on the monitor screen. Slide the zoom controller 
towards w to unzoom the image.
– When monitor screen contents are turned on, a 
graphic in the lower right corner of the screen 
shows what part of the zoomed image is currently 
displayed.
– To exit the zoom screen, press [MENU].
– Though the maximum image zoom factor is 8X, 
certain image sizes may not allow zooming up to 
the full 8X.
• Pressing [SET] will lock the current zoom factor for the on-screen image. You 
can then use [4] and [6] to scroll between images, using the same zoom 
factor. Pressing [SET] again will unlock the zoom factor and allow you to use 
[8], [2], [4] and [6] to move around the currently displayed images. This 
function cannot be used while viewing CS group images or movies. Also, CS 
group images and movies will not appear when you are scrolling images with 
[4] and [6].
1.In the PLAY mode, slide the zoom controller 
towards w (]).
Use [8], [2], [4] and [6] to move the selection 
boundary around the image menu.
To view a particular image, use [8], [2], [4], or [6] to 
move the selection boundary to the image you want and 
then press [SET].
• In the case of a movie or a continuous shutter (CS) 
file, the first frame of the file will be displayed.
Zooming an On-screen Image
Displaying the Image Menu
Image area
Current display areaZoom factor
Boundary
Downloaded From camera-usermanual.com Casio Manuals 
						

							107Viewing Snapshots and Movies
1.Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
• Make sure that the camera is turned off before plugging 
in or unplugging the cable. Check the user 
documentation that comes with the TV for information 
about requirements before plugging into or unplugging 
from the TV.
2.Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is 
connected.
Viewing Snapshots and Movies on a TV Screen
YellowAV cable (bundled)
[USB/AV] port Red
Making sure that the 6 mark on the camera is 
aligned with the 4 mark of the AV cable connector, 
connect the cable to the camera. VIDEO IN jack (yellow)AUDIO IN jack (red)
TV
Terminal cover White
AUDIO IN jack (white)Video Audio
Downloaded From camera-usermanual.com Casio Manuals 
						

							108Viewing Snapshots and Movies
3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing 
on the camera’s monitor screen.
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the 
AV cable is connected.
• You also can change the aspect ratio of the screen and the video output 
system (page 163).
4.Now you can display images and play back movies as you normally do.
IMPORTANT!
• Before connecting to a TV to display images, be sure to configure the camera’s 
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 162).
• Audio is initially output by the camera at maximum volume. When you first start 
displaying images, set the TV volume control at a relatively low level and then 
adjust it as required.
NOTE
• Audio is stereo.
• Some TVs may not be able to output images and/or audio correctly.
• All icons and indicators that appear on the monitor screen also appear on the TV 
screen. You can use [8] (DISP) to change the display contents.
Downloaded From camera-usermanual.com Casio Manuals 
						

							109Viewing Snapshots and Movies
Use a commercially available HDMI cable to 
connect the camera to the TV. For information 
about playback, see the procedure starting 
from step 2 under “Viewing Snapshots and 
Movies on a TV Screen” on page 107.
• Use a commercially available HDMI cable that is marked with the logo shown to the 
right.
IMPORTANT!
• Output to a TV is not supported while the camera is in the REC mode.
NOTE
• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini 
connector on one end, and a plug that is compatible with your TV’s HDMI 
connector on the other end.
• Proper image and/or audio output and other operations may not be possible with 
some devices.
• Connecting the camera to the HDMI connector of another device can damage both 
the camera and the other device. Never connect two HDMI output connectors to 
each other.
• Make sure that the camera is turned off before plugging in or unplugging the cable. 
Check the user documentation that comes with the TV for information about 
requirements before plugging into or unplugging from the TV.
• When cables are connected to both the USB/AV port and the HDMI output 
connector, the HDMI output connector connection is given priority.
• Disconnect the HDMI cable when you are not using HDMI output. The camera’s 
monitor screen may not operate normally while the HDMI cable is connected.
• Audio is stereo.
• Some TVs may not be able to output images and/or audio correctly.
• Audio is initially output by the camera at maximum volume. When you first start 
displaying images, set the TV volume control at a relatively low level and then 
adjust it as required.
Viewing High-quality Movies on a Hi-Vision Television
HDMI connector
HDMI cable (commercially available)
HDMI mini connector HDMI inputHDMI output 
(Mini)
Terminal cover
Downloaded From camera-usermanual.com Casio Manuals 
						

							110Viewing Snapshots and Movies
.Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * Set Up Tab * HDMI Output
Use this setting to select the digital signal format when connecting to a TV with an 
HDMI cable.
*1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output 
method may be 576p when outputting to a digital TV in a PAL reception area that does 
not support 1080i 60i. If you are in a PAL reception area and nothing is displayed 
automatically, change the setting to 576p.
• If an image does not appear when “Auto” is selected as the output method, try 
changing this setting to something else.
IMPORTANT!
• The “HDMI Output” setting cannot be changed as long as there is an HDMI cable 
connection between the camera and a TV. Disconnect the HDMI cable from the 
camera to change the “HDMI Output” setting.
Recording Camera Images to a DVD Recorder or Video Deck
Use the following method to connect the camera to the recording device using the 
camera’s bundled AV cable.
– DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN 
terminals.
– Camera: Connect the AV cable to the USB/AV port.
You can play a slideshow of snapshots and movies on the camera and record it on a 
DVD or video tape. You can record movies by selecting “» Only” for the slideshow 
“Images” setting (page 111).
For information about connecting a monitor to the recording device and about how to 
record, see the user documentation that comes with the recording device you are 
using.
AutoThis setting will cause the format to change automatically in accordance 
with the connected TV. Normally, you should use this mode.
1080i1080i format output*
480p480p format output
576p576p format output
Downloaded From camera-usermanual.com Casio Manuals