Casio Exilim EX V7 User Manual

201OTHER SETTINGS
■Switching between the Home Time and 
World Time Screens
1.Press [MENU].
2.On the “Set Up” tab,  select “World Time” and 
then press [ X].
3.Use [ S] and [ T] to select “World” for the 
World Time screen, or “Home” for the Home 
Time screen.
4.After selecting the screen you want, press 
[SET] to exit the setting screen.
You can use the procedure below to select a display text 
language.
• The number and types of languages depend on the 
geographic area where the camera was marketed....

202OTHER SETTINGS
You can use the following procedure to change the brightness of 
the monitor screen.
1.Press [MENU].
2.Select the “Set Up” tab, select “Screen”, and 
then press [ X]
3.Use [ S] and [ T] to select the setting you want, 
and then press [SET].
Changing the Brightness of the 
Monitor Screen
When you want to do this:Select this 
setting:
Automatic adjustment of monitor screen 
brightness in accordance with lighting 
conditions
• Auto 2 adjusts to a brighter setting 
more quickly than Auto...

203OTHER SETTINGS
You can use the procedure below to change the USB 
communication protocol that is used when exchanging data with 
a computer, printer, or other external device. Select the protocol 
that suits the device to which you are connecting.
1.Press [MENU].
2.On the “Set Up” tab, select “USB” and then 
press [X].
3.Use [ S] and [ T] to select the setting you want 
and then press [SET].Changing the USB Port Protocol
When you want to connect to this type 
of device:Select this 
setting:
Computer...

204OTHER SETTINGS
You can use the procedure below to specify what happens when 
you press the [ ] (PLAY) button.
1.Press [MENU].
2.On the “Set Up” tab, select “  Power On” 
and then press [X].
3.Use [ S] and [ T] to select the setting you want 
and then press [SET].
NOTE• The initial factory default for this setting is “Power On”.
• Change this setting to anything besides “Disable” before 
connecting to a TV for image viewing.
Configuring [ ] (PLAY) Button 
Settings
To configure the button to do this...

205OTHER SETTINGS
Formatting built-in memory deletes any data stored in it.
IMPORTANT!
•Note that data deleted by a format operation cannot be 
recovered. Check to make sure you do not need any of the 
data in built-in memory before you format it.
• Formatting built-in memory also deletes the following.
– Protected images
– FAVORITE folder images
– BEST SHOT mode user setups
– Startup screen
• Make sure that the battery is charged fully before starting a 
formatting operation. Formatting may not be...

206PRINTING
PRINTING
There are three different methods you can use for printing images.
Types of Printing
Professional 
Print Service 
(page 207)Take the memory card that contains the images you want to print to a 
professional print service.
•
You can use DPOF settings to specify which images you want to print, 
the number of copies, and date stamp settings before taking the card in 
for printing.
Printing at 
Home Printing on a Printer (page 208) Print on a printer that supports PictBridge or USB...

207PRINTING
■Printing Precautions
•See the documentation that comes with your printer for 
information about print quality and paper settings.
• Contact the manufacturer of your printer to find out if it 
supports PictBridge or USB  DIRECT-PRINT, for new printer 
versions, etc.
• Never disconnect cables or perform any camera or USB 
cradle operation while printing is in progress. Doing so can 
cause a printer error. Take a memory card that contains the images you want to print 
to the professional print...

208PRINTING
If your printer is either of the types described below, you can use 
it to print without going through a computer.– Printer equipped with a card slot for the type of memory  card you are using
– Printer that support PictBridge or USB DIRECT-PRINT
■ Printing on a Printer with a Memory Card 
Slot
Remove a memory card from the camera and insert it directly 
into the printer’s memory card slot. Depending on what type of 
printer you are using, it also may be able to read the settings 
(images to...

209PRINTING
4.Connect the USB cable that comes bundled 
with the camera to the USB cradle and your 
printer’s USB port.
• Also, connect the AC adaptor to the cradle and plug the 
adaptor into an electrical outlet.
• If you do not plan to use the AC adaptor, make sure that 
the camera’s battery is fully charged.
• Nothing appears on the camera’s monitor screen if the 
camera is on the USB cradle while the bundled AV cable 
is connected to the cradle. Be sure to disconnect the AV 
cable from the cradle if...

210PRINTING
9.Use [S] and [ T] to select “Paper Size” and 
then press [ X].
10.Use [ S] and [ T] to select a paper size and 
then press [SET].
• The following are the available paper sizes.
3.5 × 5, 5 × 7, 4 × 6, A4, 8.5 × 11, By Printer
• Selecting “By Printer” prints using a paper size selected 
on the printer.
• Available paper settings depend on the connected 
printer. For full details, see the user documentation that 
comes with your printer.
11.Use [ S] and [ T] to specify the print option 
you...