Casio Exilim EX V7 User Manual

191MANAGING YOUR FILES
7.Now you can repeat steps 5 and 6 to copy 
another file, or you can  exit this procedure by 
pressing [MENU].
NOTE• Files are copied to the folder in built-in memory whose 
name has the largest serial number.
Downloaded From camera-usermanual.com Casio Manuals 

192DELETING FILES
DELETING FILES
You can delete files you no longer need, or after you transfer 
them to your computer’s hard disk or print them. This frees up 
memory for new files.
You can delete one specific file, or you can delete all files 
currently in memory.
Here we will explain the different file delete procedures, 
including how to delete snapshots from the FAVORITE folders.
IMPORTANT!
•Remember that a file delete operation cannot be undone. 
Always make sure that you really no longer need a...

193DELETING FILES
1.In the PLAY mode, press [T] ( ).
2.Use [ S] and [ T] to select “All Files Delete” 
and then press [SET].
3.In response to the conf irmation message that 
appears, use [ S] and [ T] to select “Yes”.
• To cancel the delete operation, select “No” instead of 
“Yes”.
4.Press [SET].
•This deletes all of the files and displays the message 
“There are no files.” You can delete a single snapshot, or you can delete all the 
snapshots currently in the FAVORITE folder.
1.In the PLAY mode, press...

194OTHER SETTINGS
OTHER SETTINGS
Your camera lets you configure the following sound settings.
•Type of sound and volume for shutter release and other 
operations
• Volume level for movie and Voice Recording playback
■ Selecting the Operation Sound
1.Press [MENU].
2.On the “Set Up” tab, se lect “Sounds” and then 
press [ X].
3.Use [ S] and [ T] to select the operation whose 
sound you want to configure (Startup, Half 
Shutter, Shutter, Oper ation) and then press 
[ X ].
4.Use [ S] and [ T] to select the...

195OTHER SETTINGS
■Setting the Operation Tone Volume Level
1.Press [MENU].
2.On the “Set Up” tab, se lect “Sounds” and then 
press [ X].
3.Use [ S] and [ T] to select “  Operation”.
4.Use [ W] and [ X] to specify the playback 
volume setting you want  and then press [SET].
•You can set the volume to one of eight levels in the range 
of 0 (lowest) to 7 (highest).
• Setting a volume level of 0 mutes the sound.
NOTE•The volume setting you configure here is also applied to 
video output (page 154).
■...

196OTHER SETTINGS
You can configure the camera to display a startup screen of an 
image you recorded, whenever you turn it on.
•Even if you configure startup screen settings in the PLAY 
mode, the startup screen does not appear when turn on the 
camera by pressing [ ] (PLAY).
1.Press [MENU].
2.On the “Set Up” tab, sel ect “Startup” and then 
press [ X].
3.Use [ W] and [ X] to scroll through the images 
until the one you want to use as the startup 
screen is on the monitor screen.
4.Use [ S] and [ T] to...

197OTHER SETTINGS
Use the following procedure to specify the rule that governs 
generation of the serial number used in file names (page 184).
1.Press [MENU].
2.On the “Set Up” tab, select “File No.” and then 
press [X].
3.Use [ S] and [ T] to select the setting you want 
and then press [SET].
Specifying the File Name Serial 
Number Generation Rule
To have the camera do this:Select this 
setting:
Remember the numbers used for files. Files 
will be named using the next sequential 
number, even if files...

198OTHER SETTINGS
When changing the date and time setting, be sure to do so for 
your Home City (the location where you normally use the 
camera). If you already have your Home City setting configured 
correctly, you can use the procedure under “Setting the Date 
and Time for Your Home City” (page 199) to change the current 
time setting only, if you want.
IMPORTANT!
•Changing the time and date setting without correctly 
configuring your Home City setting first will cause all of the 
World Time (page...

199OTHER SETTINGS
■Setting the Date and Time for Your Home 
City
1.Press [MENU].
2.On the “Set Up” tab, sel ect “Adjust” and then 
press [ X].
3.Set the date and the time.
4.After all of the setting s are the way you want, 
press [SET] to exit the setting screen.
■ Changing the Date Format
You can select from among three different formats for the date.
1.Press [MENU].
2.On the “Set Up” tab, select “Date Style” and 
then press [ X].
3.Use [ S] and [ T] to select the setting you want 
and then press...

200OTHER SETTINGS
You can use the World Time screen to view the current time in 
zone that is different from your Home City when you go on a trip, 
etc. World Time displays the current time in 162 cities in 32 time 
zones around the globe.
Configuring World Time Settings
1.
Press [MENU].
2.On the “Set Up” tab, select “World Time” and 
then press [ X].
3.Use [ S] and [ T] to select “World” and then 
press [ X].
4.Use [ S] and [ T] to 
select “City” and then 
press [ X].
• To configure the summer 
time...