Casio Exilim EX V7 User Manual

151VIEWING SNAPSHOTS AND MOVIES
Images 
(Select the 
files you want 
to include in 
the 
slideshow.)•
All images: Includes all snapshots, movies, 
and audio in memory.
•  Only: Includes snapshots and audio 
snapshots only.
•  Only: Includes movies only.
• One Image: Includes only one specific 
image (selected using [ W] and [ X]).
• Favorites: Includes snapshots in the 
FAVORITE folder (page 187).
Time (Specify 
the time of the 
slideshow, 
from start to 
finish.) Use [
W] and [ X] to select one of the...

152VIEWING SNAPSHOTS AND MOVIES
4.Use [S] and [ T] to select “Start” and then 
press [SET] to st art the slideshow.
The slideshow is performed in accordance with the settings 
you configured above.
•You can also scroll through images during a slide show 
by pressing [ X] (forward) and [ W] (back). Note that this 
operation is not possible when “Pattern 5” is selected for 
the “Effect” setting. 
• During audio playback, you can adjust volume by 
pressing [ T] and then using [ S] and [ T].
To stop a...

153VIEWING SNAPSHOTS AND MOVIES
■Playing a Slideshow on the USB Cradle 
(Photo Stand)
You can play a slideshow on the camera while it is mounted on 
the USB cradle. This is a good way to enjoy a long slideshow, 
without worrying about the camera’s battery going dead.
•Configure slideshow settings (page 150) before performing 
the steps below.
• Connect the bundled AC adaptor to the USB cradle, and plug 
it into a power outlet.
1.Turn on the camera and  place it onto the USB 
cradle.
2.Press the USB...

154VIEWING SNAPSHOTS AND MOVIES
To stop a slideshow
Press the USB cradle’s [PHOTO] button. This will turn off the 
camera.
IMPORTANT!
•
The battery does not charge while a slideshow is in 
progress. To charge the battery, stop the slideshow.
• Do not remove the camera from the cradle while a 
slideshow is in progress. Doing so can cause data to 
become corrupted.
NOTE•You can connect the USB cradle to a TV and enjoy the 
slideshow on a big screen. You can also connect to a video 
recording device and...

155VIEWING SNAPSHOTS AND MOVIES
3.Turn on the TV and select its video input 
mode.
If the TV has more than one video input, select the one 
where the USB cradle is connected.
4.Press [ ] to turn on the camera and enter the 
PLAY mode.
When the camera turns on in the PLAY mode, an image will 
appear on the TV screen.
5.Now you can perform the applicable operation 
on the camera for the type of file you want to 
play.
•At this point you could press the USB cradle’s [PHOTO] 
button to start a slideshow...

156VIEWING SNAPSHOTS AND MOVIES
NOTE•You can use the camera’s USB cradle to connect to a DVD 
recorder or video deck and record images from the camera. 
There are various different methods you can use in order to 
connect to another device when recording images. The 
following describes one method for connection using the 
AV cable that comes with the camera.
– DVD recorder or video deck: Connect to the VIDEO IN 
and AUDIO IN terminals.
– USB cradle: Connect to the [AV OUT] (AV output port)
– Camera:...

157VIEWING SNAPSHOTS AND MOVIES
IMPORTANT!
•Select the aspect ratio (4:3 or 16:9) that matches the type 
of TV you plan to use. You may also need to configure the 
aspect ratio setting on your TV as well. Incorrect aspect 
ratio settings on the camera and/or the TV can result in 
abnormal image display.
• Images will not display correctly unless the camera’s video 
signal output setting matches the video signal system of 
the TV or other video equipment.
• Images will not display correctly on a TV or...

158VIEWING SNAPSHOTS AND MOVIES
To zoom back out, slide the zoom controller towards 
[] ().
•
If display indicators are turned on, an indicator in the lower 
right corner of the monitor screen shows what part of the 
zoomed image is currently displayed.
To return to image to normal size
Press [MENU].
IMPORTANT!
• Depending on the image size, some images may not be 
able to be zoomed to the full 8 times normal size. You can use the procedure below to display a screen that shows 
9 images.
1.In the PLAY...

159VIEWING SNAPSHOTS AND MOVIES
Use the following procedure to display a calendar, which shows 
the first image recorded on each date of a particular month. This 
screen helps to make searching for an image quicker and 
easier.
1.In the PLAY mode, 
slide the zoom 
controller towards 
[] ( ) twice.
This displays the calendar 
screen.
•You can also display the 
calendar by pressing 
[MENU], selecting the 
“PLAY” tab, selecting 
“Calendar”, and then 
pressing [ X] to display the 
calendar.
• To exit the...

160VIEWING SNAPSHOTS AND MOVIES
IMPORTANT!
•Note following points about how certain editing functions of 
the camera affect the date with which the image is 
associated on the calendar screen.
Performing this type of 
editing operation:Will associate the resulting 
image with this date:
Keystone, Color 
Correction, Resize, 
Trimming, Copy, Layout 
Print, MOTION PRINT The date that the editing 
operation was performed
Editing the date and time 
of an image The date that the original 
image was recorded...