Casio Exilim EX V7 User Manual

101USING BEST SHOT
NOTE•Registering a snapshot creates a snapshot setup, while 
registering a movie creates a movie setup. A snapshot 
setup can be used to shoot snapshots only, and a movie 
setup can be used to shoot movies only.
• You can check the settings of the currently selected BEST 
SHOT scene by displaying the camera’s setting menus and 
looking at its settings.
• User BEST SHOT scenes are assigned numbers in the 
sequence: U1, U2, U3, and so on.
• The following are the settings that are...

102USING BEST SHOT
5.Use [S] and [ T] to select “Delete” and then 
press [SET].
This will delete the BEST SHOT user scene you selected 
and display the next screen (either the next user scene or 
the Register User Scene).
6.Use [ W] and [ X] to select another scene and 
then press [SET].
• This returns to the recording state. The BEST SHOT “High Sensitivity” scene makes it possible for 
you to take natural looking images without using the flash, even 
when lighting is low
1.In a REC mode, align the mode...

103USING BEST SHOT
IMPORTANT!
•High Sensitivity is disabled following an automatic flash 
operation using the “Auto Flash” or “Red Eye” setting, or 
while the flash setting is “Flash On” or “Soft Flash”.
• Shooting with High Sensitivity can cause an image to 
appear somewhat coarser than normal and can cause 
slight deterioration of image resolution.
• The desirable level of image brightness may not be 
possible under very dark conditions.
• When shooting with slow shutter speeds, use a tripod to...

104USING BEST SHOT
BEST SHOT has two Business Shot scenes from which to 
choose.
■Selecting a Business Shot Scene
1.In a REC mode, align the mode dial with “ ”, 
and then press [SET].
2.Use [ S], [ T], [ W], and [ X] to select the 
“Business cards and documents” or the 
“White board, etc.” scene and then press 
[SET].
Whichever you select will remain in effect until you select a 
different BEST SHOT scene.
■ Shooting an Image Us ing a Business Shot 
Scene
1.After selecting either 
of the BEST SHOT...

105USING BEST SHOT
2.Use [W] and [ X] to select the candidate you 
want to use for correction.
3.Use [ S] and [ T] to select “Correct” and then 
press [SET].
This will correct the image and store the resulting 
(corrected) image.
• To cancel the correction operation, select “Cancel”.
IMPORTANT!
•Make sure the entire object you are trying to shoot (correct) 
is enclosed within the monitor screen. The camera will not 
be able to detect the shape of the object correctly unless it 
is enclosed entirely...

106USING BEST SHOT
With Old Photo, you can record the image of an old, faded 
photograph and then use the camera’s built-in advanced digital 
camera technology to restore it.
■Before Recording with Old Photo
•Make sure the entire photograph you are trying to record is 
enclosed within the monitor screen.
• Make sure the photograph is against a background that 
allows its outline to stand out, and that it fills the monitor 
screen to the maximum extent possible.
• Make sure that light is not reflecting...

107USING BEST SHOT
■Recording an Image with Old Photo
1.Press the shutter 
button to shoot the 
image.
•This displays a 
photograph contour 
confirmation screen and 
then saves the original 
recorded image. An error 
message will appear (page 267), without displaying the 
photograph contour confirmation screen, if the camera is 
unable to find the contour of the photograph.
2.Use [ W] and [ X] to select the candidate you 
want to correct.
3.Use [ S] and [ T] to select “T rim” and then 
press [SET].
This...

108USING BEST SHOT
5.Use [S], [ T], [ W], and [ X] to move the 
selection boundary to the desired location and 
then press [SET].
The camera will correct color automatically and save the 
corrected image.
• If you do not want a border around the resulting image, 
select and area that is smaller than the original image.
• To cancel the restoration operation at any point and save 
the image as-is, press [MENU].
IMPORTANT!
•Digital zoom is disabled while recording with Old Photo. 
However, you can use...

109USING BEST SHOT
You can create a multi-snapshot image by recording snapshots 
into the frames that are arranged in a preset pattern. This lets 
you create album-like arrangements of related images in a 
single image. BEST SHOT scenes are available with three 
frames and two frames.
1.In a REC mode, align the mode dial with “ ”, 
and then press [SET].
2.Use [S], [ T], [ W], and [ X] to select “Layout”, 
and then press [SET].
3.Use [ W] and [ X] to select a background color.
4.Press the shutter 
button...

110USING BEST SHOT
5.Press the shutter button again to record the 
next snapshot.
• If you are shooting into a three-frame layout, press the 
shutter button a third time to record the third image.
• Pressing [ S] (DISP) during steps 3 or 4 of the above 
procedure will toggle between the layout screen (the one 
with the frames on it) and a screen that uses the entire 
display area to compose the image you are shooting.
• To clear the currently recorded Layout images and restart 
an ongoing Layout...