Casio Exilim EX V7 User Manual

211PRINTING
12.Use [S] and [ T] to select “Print” and then 
press [SET].
Printing will start and the message “Busy... Please wait...” 
will appear on the monitor screen. The message will 
disappear after a short while, even though printing is still 
being performed. Pressing any camera button will cause the 
printing status message to re-appear.
The print menu screen will re-appear when printing is 
complete.
• If you selected “1 Image” in step 11, you can repeat the 
procedure from step 11 to print...

212PRINTING
■Configuring DPOF Settings Individually for 
Each Image
1.In the PLAY mode, press [MENU].
2.On the “PLAY” tab, 
select “DPOF 
Printing” and then 
press [ X].
3.Use [ S] and [ T] to select “Select images” and 
then press [ X].
4.Use [ W] and [ X] to scroll through the images 
until the one you want to print is on the 
monitor screen.
5.Use [ S] and [ T] to specify the number of 
copies.
• You can specify up to 99 for the number of copies. 
Specify 0 if you do not want to print the image.
6.If...

213PRINTING
■Configuring the Same DPOF Settings for All 
the Images
1.In the PLAY mode, press [MENU].
2.On the “PLAY” tab,  select “DPOF Printing” 
and then press [ X].
3.Use [ S] and [ T] to select “All images” and 
then press [ X].
4.Use [ S] and [ T] to specify the number of 
copies.
• You can specify up to 99 for the number of copies. 
Specify 0 if you do not want to print.
5.If you want to include the date in all the 
images, slide the zoom co ntroller to turn on 
date stamping.
• To turn off date...

214PRINTING
Date Stamping
You can use any one of the following three methods to include 
the recording date in the printout of an image.
•Configure DPOF settings on the camera to specify date 
stamping (page 211)
– If an image already has the date or time stamped into it 
using the camera’s Date Stamping feature, turning on 
DPOF date stamping will cause the two dates to be 
stamped in the same location. Be sure to turn off DPOF 
date stamping when printing an image that is stamped with 
the camera’s...

215PRINTING
Your camera supports the protocols described below.
■PictBridge
Camera and Imaging Products Association (CIPA)
■USB DIRECT-PRINT
Seiko Epson Corporation
■PRINT Image Matching  III
Using image editing software and printing on a 
printer that also supports PRINT Image Matching 
III makes it possible to use information about 
shooting conditions that is recorded with the 
image, and produce exactly the type of image you 
want.
PRINT Image Matching and PRINT Image Matching  III are 
trademarks...

216USING THE CAMERA WITH A COMPUTER
USING THE CAMERA WITH A COMPUTER
Connecting the camera to a computer with the bundled USB 
cable provides you with the capabilities described below.*You can also transfer images to a computer for viewing and 
storage without connecting the camera, by removing the 
memory card from the camera and reading the contents of the 
card with your computer (page 247).
What you can do
View and 
store images *You can use your computer to view camera 
images and for long-term...

217USING THE CAMERA WITH A COMPUTER
The procedures you need to perform when using the camera 
with your computer and when using the bundled software are 
different for Windows and the Macintosh.
•Windows users should refer to “Using the Camera with a 
Windows Computer” on page 217.
• Macintosh users should refer to “Using the Camera with a 
Macintosh” on page 239.
IMPORTANT!
• This camera supports USB 2.0 Hi-Speed protocol. Though 
it can be used with a computer that supports only USB 1.1 
protocol,...

218USING THE CAMERA WITH A COMPUTER
Play movies XP/2000QuickTime 7 231
Edit movies Vista/XP/
2000
Movie Wizard 3.2 SE VCD
•
You also need to install 
DirectX, Microsoft 
Windows Media Player, 
QuickTime 7, and Flash 
Player separately. 232
XP/2000 VideoStudio 10 Plus for 
CASIO (Trial Version)
•
This is the Trial Version 
of the software, whose 
use is limited to 30 days 
following installation.
• You also need to install 
DirectX, Microsoft 
Windows Media Player, 
QuickTime 7, and Flash 
Player...

219USING THE CAMERA WITH A COMPUTER
■Computer System Requirements for 
Bundled Software
Computer system requirements are different for each of the 
applications. Be sure to check the requirements for the particular 
application you are trying to use. Note that the values provided 
here are minimum requirements for running each application. 
Actual requirements are greater, depending on the number of 
images and the sizes of the images being handled.
USB driver Type B
•Installation is not required in the...

220USING THE CAMERA WITH A COMPUTER
Movie Wizard 3.2 SE VCD
VideoStudio 10 Plus for CASIO (Trial Version)
*
 30-day trial version
IMPORTANT!
• For details about the minimum system requirements for 
each software application, see the “Read me” files on the 
CD-ROM that comes bundled with the camera.
CPU : Intel Pentium 4, M, D, or Extreme Edition; or AMD 
Athlon 64 or higher
Memory : 256MB of RAM (at  least 512MB recommended)
HD : •250MB space available for program installation
• At least 4GB space...