Casio Exilim EX V7 User Manual

							
201OTHER SETTINGS
■Switching between the Home Time and 
World Time Screens
1.Press [MENU].
2.On the “Set Up” tab,  select “World Time” and 
then press [ X].
3.Use [ S] and [ T] to select “World” for the 
World Time screen, or “Home” for the Home 
Time screen.
4.After selecting the screen you want, press 
[SET] to exit the setting screen.
You can use the procedure below to select a display text 
language.
• The number and types of languages depend on the 
geographic area where the camera was marketed.
1.Press [MENU].
2.On the “Set Up” tab,  select “Language” and 
then press [ X].
3.Use [ S], [ T], [ W], and [ X] to select the setting 
you want and then press [SET].
Changing the Display Language
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
202OTHER SETTINGS
You can use the following procedure to change the brightness of 
the monitor screen.
1.Press [MENU].
2.Select the “Set Up” tab, select “Screen”, and 
then press [ X]
3.Use [ S] and [ T] to select the setting you want, 
and then press [SET].
Changing the Brightness of the 
Monitor Screen
When you want to do this:Select this 
setting:
Automatic adjustment of monitor screen 
brightness in accordance with lighting 
conditions
• Auto 2 adjusts to a brighter setting 
more quickly than Auto 1. Auto 1 or Auto 2
Higher monitor screen brightness than 
the +1 setting
• This setting consumes more power. +2
Relatively higher monitor screen 
brightness than the 0 setting (for 
outdoor use)
•
This setting consumes more power. +1
Normal monitor screen brightness (for 
indoor use) 0
When you want to do this:Select this 
setting:
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
203OTHER SETTINGS
You can use the procedure below to change the USB 
communication protocol that is used when exchanging data with 
a computer, printer, or other external device. Select the protocol 
that suits the device to which you are connecting.
1.Press [MENU].
2.On the “Set Up” tab, select “USB” and then 
press [X].
3.Use [ S] and [ T] to select the setting you want 
and then press [SET].Changing the USB Port Protocol
When you want to connect to this type 
of device:Select this 
setting:
Computer or a printer that supports USB 
DIRECT-PRINT (page 208)
With this setting, the computer sees the 
camera as an external storage device. 
Use this setting for normal transfer of 
images from the camera to a computer 
(using the bundled Photo Loader with 
HOT ALBUM application). Mass Storage
(USB DIRECT-
PRINT)
Printer that supports PictBridge (page 
208)
This setting simplifies the transfer of 
image data to the connected device. PTP
(PictBridge)
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
204OTHER SETTINGS
You can use the procedure below to specify what happens when 
you press the [ ] (PLAY) button.
1.Press [MENU].
2.On the “Set Up” tab, select “  Power On” 
and then press [X].
3.Use [ S] and [ T] to select the setting you want 
and then press [SET].
NOTE• The initial factory default for this setting is “Power On”.
• Change this setting to anything besides “Disable” before 
connecting to a TV for image viewing.
Configuring [ ] (PLAY) Button 
Settings
To configure the button to do this 
when pressed:Select this 
setting:
Turn on the camera Power On
Turn on the camera when held down for 
about one second
• This setting prevents turning on the 
camera accidentally when it is being 
carried in a bag, etc. Hold: On
Do not turn on the camera Disable
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
205OTHER SETTINGS
Formatting built-in memory deletes any data stored in it.
IMPORTANT!
•Note that data deleted by a format operation cannot be 
recovered. Check to make sure you do not need any of the 
data in built-in memory before you format it.
• Formatting built-in memory also deletes the following.
– Protected images
– FAVORITE folder images
– BEST SHOT mode user setups
– Startup screen
• Make sure that the battery is charged fully before starting a 
formatting operation. Formatting may not be performed 
correctly and the camera may stop operating normally if the 
camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in 
progress. Doing so can cause the camera to stop operating 
normally.
1.Check to make sure there is no memory card 
loaded in the camera.
•If there is a memory card loaded in the camera, remove it.
2.Press [MENU].
3.On the “Set Up” tab, se lect “Format” and then 
press [ X].
4.Use [ S] and [ T] to select “For mat” and then 
press [SET].
This formats built-in memory.
• To exit the format operation without formatting, select 
“Cancel”.
• Entering the PLAY mode after formatting the built-in 
memory will cause the message “There are no files.” to 
appear.
Formatting Built-in Memory
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
206PRINTING
PRINTING
There are three different methods you can use for printing images.
Types of Printing
Professional 
Print Service 
(page 207)Take the memory card that contains the images you want to print to a 
professional print service.
•
You can use DPOF settings to specify which images you want to print, 
the number of copies, and date stamp settings before taking the card in 
for printing.
Printing at 
Home Printing on a Printer (page 208) Print on a printer that supports PictBridge or USB DIRECT-PRINT, or on a 
printer equipped with a memory card slot.
•You can use DPOF settings to specify which images you want to print, 
the number of copies, and date stamp settings before printing.
Printing with a Computer ■Windows Computer
Install the software (Photo Loader with HOT ALBUM) that comes bundled 
with the camera.
See “Using the Camera with a Windows Computer” on page 217.
■ Macintosh
After transferring the images to your Macintosh, use commercially 
available software to print.
See “Using the Camera with a Macintosh” on page 239.
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
207PRINTING
■Printing Precautions
•See the documentation that comes with your printer for 
information about print quality and paper settings.
• Contact the manufacturer of your printer to find out if it 
supports PictBridge or USB  DIRECT-PRINT, for new printer 
versions, etc.
• Never disconnect cables or perform any camera or USB 
cradle operation while printing is in progress. Doing so can 
cause a printer error. Take a memory card that contains the images you want to print 
to the professional print service. Before taking in a memory card, 
you can use the camera’s DPOF settings (page 211) to specify 
which images you want printed, the number of copies, and 
whether or not the images should include a date stamp.Using Professional Print Service
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
208PRINTING
If your printer is either of the types described below, you can use 
it to print without going through a computer.– Printer equipped with a card slot for the type of memory  card you are using
– Printer that support PictBridge or USB DIRECT-PRINT
■ Printing on a Printer with a Memory Card 
Slot
Remove a memory card from the camera and insert it directly 
into the printer’s memory card slot. Depending on what type of 
printer you are using, it also may be able to read the settings 
(images to be printed, number of copies, date stamping) you 
configure with the camera’s DPOF settings (page 211). For 
details, see the user documentation that comes with your printer.
■Printing on a Printer that Supports 
PictBridge or USB DIRECT-PRINT
You can connect the camera directly to a PictBridge or USB 
DIRECT-PRINT compliant printer and print images without going 
through a computer.
•The camera’s USB cradle also allows easy connection to a 
printer. Before connecting to a printer via the USB cradle, be 
sure to perform the following procedure first.
1.Press [MENU].
2.On the “Set Up” tab, select “USB” and then 
press [ X].
3.Use [ S] and [ T] to select the se tting that suits 
your printer and then press [SET].
Using Your Printer to Print Images
For this type of printer:Select this setting:
USB DIRECT-PRINT compatible Mass Storage
PictBridge compatible PTP
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
209PRINTING
4.Connect the USB cable that comes bundled 
with the camera to the USB cradle and your 
printer’s USB port.
• Also, connect the AC adaptor to the cradle and plug the 
adaptor into an electrical outlet.
• If you do not plan to use the AC adaptor, make sure that 
the camera’s battery is fully charged.
• Nothing appears on the camera’s monitor screen if the 
camera is on the USB cradle while the bundled AV cable 
is connected to the cradle. Be sure to disconnect the AV 
cable from the cradle if you want to use the camera’s 
monitor screen to view images.
5.Turn off the came ra and place it onto the USB 
cradle.
6.Turn on the printer.
7.Load paper into the printer.
8.Press the USB 
cradle’s [USB] button.
This displays a print menu 
on the camera’s monitor 
screen.
USB
USB Port USB Cable (Bundled)
Connector A
[ ] (USB) Connector
Connector Mini-B
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							
210PRINTING
9.Use [S] and [ T] to select “Paper Size” and 
then press [ X].
10.Use [ S] and [ T] to select a paper size and 
then press [SET].
• The following are the available paper sizes.
3.5 × 5, 5 × 7, 4 × 6, A4, 8.5 × 11, By Printer
• Selecting “By Printer” prints using a paper size selected 
on the printer.
• Available paper settings depend on the connected 
printer. For full details, see the user documentation that 
comes with your printer.
11.Use [ S] and [ T] to specify the print option 
you want.
If you want to print a specific image:
Select “1 Image” and then press [SET]. After that, use [ W] 
and [ X] to display the image you want to print.
If you want to print multiple images: Select “DPOF Printing” and then press [SET]. Next, use 
the DPOF settings (page 211) to specify the images you 
want to select.
• To toggle date stamping 
on and off, slide the zoom 
controller. The date stamp 
will be printed when “On” 
is indicated on the monitor 
screen.
Downloaded From camera-usermanual.com Casio Manuals