Casio EX S10 User Manual

71Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and 
dark) to –2 (least contrast between light and dark).
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Intensity
You can specify one of five flash intensity settings, from –2 (weakest) to +2 
(strongest).
• Flash intensity may not change when the subject is too far away or too close.
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Assist
The...

72Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 19 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [SET] to start 
playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/
fast reverse[4] [6]
• Each press of either button increases the speed of the fast 
forward or fast reverse operation.
• To return to...

73Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom controller towards z ([) to 
zoom.
You can use [8], [2], [4], and [6] to scroll the 
zoomed image on the monitor screen. Slide the 
zoom controller towards w to unzoom the image.
– If display indicators are turned on, an indicator 
in the lower right corner of the monitor screen 
shows what part of the zoomed image is 
currently displayed.
– To exit the...

74Viewing Snapshots and Movies
1.In the PLAY Mode, slide the zoom controller towards w (]) twice.
This will display the calendar screen that shows the first image recorded on each 
day.
To display the first image recorded on a particular 
day, use [8], [2], [4], and [6] to move the selection 
boundary to the day you want and then press [SET].
To exit the calendar screen, press [MENU] or [BS] 
(^).
• If you save an image using any one of the 
following functions, the image will appear in the 
calendar on...

75Viewing Snapshots and Movies
1.Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still 
will be able to see the metal part of the connector as shown 
in the illustration.
2.Turn on the TV and select its video input mode.
If...

76Viewing Snapshots and Movies
NOTE
• Audio is monaural.
• Certain TVs may cut off part of the images.
• Before connecting to a TV to display images, be sure to configure the camera’s 
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 130).
• Audio is initially output by the camera at maximum volume. When you first start 
displaying images, set the TV volume control at a relatively low level and then 
adjust it as required.
• All icons and indicators that appear on the monitor...

77Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
For information about menu operations, see page 56.
Playing a Slideshow on the Camera (Slideshow)
StartStarts the slideshow
ImagesSpecifies the type of images to be included in the slideshow
All images: Snapshots, movies, and audio recordingsT Only: Snapshots and audio...

78Other Playback Functions (PLAY)
• To stop the slideshow, press [SET]. Pressing [MENU] instead of [SET] stops the 
slideshow and returns to the menu screen.
• Adjust audio volume by pressing  [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
You can replace the...

79Other Playback Functions (PLAY)
4.Double-click the “SSBGM” folder you created and copy the 
background music file to it.
• See the user documentation that comes with your computer for information 
about moving, copying, and deleting files.
• If there are background music files both in built-in memory and on the memory 
card loaded in the camera, the files on the memory card take priority.
• See page 115 for information about camera folders.
5.Disconnect the camera from the computer (pages 102, 111)....

80Other Playback Functions (PLAY)
NOTE
• You will not be able to save the new image unless there is a snapshot in all of the 
layout frames.
• 3:2 and 16:9 images cannot be included in a Layout Print image.
• The recording date of the resulting Layout Print image is the recording date if the 
image you place into the final frame, not the date you create the Layout Print 
image.
• The Layout Print image is saved as 7M (3072
x2304 pixels) size.
Procedure
[p] (PLAY) * Movie Screen * [MENU] * PLAY Tab *...