Casio EX S10 User Manual
Here you can view all the pages of manual Casio EX S10 User Manual. The Casio manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 31
31Snapshot Tutorial Tips for Better Auto Shutter Snapshots • Using Auto Shutter in combination with Anti Shake (page 62) reduces the chance of image blur even more. • While recording with Detect Blur or Detect Smile, keep the camera as still as possible until the recording operation is complete. IMPORTANT! • If the camera remains in Auto Shutter standby without releasing the shutter, you can record an image by pressing the shutter button all the way down again. • Detect Blur and Detect Panning may not...
Page 32
32Snapshot Tutorial The face recognition feature adjusts focus and brightness to the faces in the image. Face recognition has two modes, described below. 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition). 3.Use [4] and [6] to select “G Face Detection: Normal” and then press [SET]. 4.Point the camera at the subject(s). The camera will detect human faces and display a frame around each one. 5.Half-press the shutter button. The...
Page 33
33Snapshot Tutorial .To pre-record the faces of family members, etc. 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition). 3.Use [4] and [6] to select “K Record Family” and then press [SET]. 4.With the camera pointed straight at the face of the person you want to pre-record, align the frame on the monitor screen with the face and then press the shutter button. 5.When the message “Face recognition successful!” appears, use [8] and...
Page 34
34Snapshot Tutorial .To assign a priority level to pre-recorded face data You can use the procedure below to assign names and priority levels to pre-recorded faces. 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition). 3.Use [4] and [6] to select “J Edit Family” and then press [SET]. This will display the face data editing screen. 4.Use [8], [2], [4], and [6] to select the face data you want to edit, and then press [SET]. 5.Use [4]...
Page 35
35Snapshot Tutorial .To add a face data shot to an existing pre-recorded family member Face recognition efficiency can be improved by recording three or four face data shots under various conditions for a single individual. 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition). 3.Use [4] and [6] to select “J Edit Family” and then press [SET]. 4.Use [8], [2], [4], and [6] to select the thumbnail of face data to which you want to add...
Page 36
36Snapshot Tutorial .To shoot a snapshot using pre-recorded face data 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition). 3.Use [4] and [6] to select “H Face Recognition: Family First” and then press [SET]. 4.Point the camera at the subject(s). The camera will detect human faces and display a boundary around each one. • The boundaries will be colored according to the priority level of the face: white (lowest), yellow, or light...
Page 37
37Snapshot Tutorial Tips for Best Face Recognition Results • Face recognition in the Family First mode is slightly faster than that in the Normal mode. Also, compared with the Normal mode, the Family First mode will not be able to detect faces that are far away and small. • The camera performs center focus if it cannot detect a face. • Always make sure that Auto Focus (AF) is selected as the focus mode when shooting with face recognition. • Face recognition may take a bit longer when you hold the...
Page 38
38Snapshot Tutorial Your camera has three continuous shutter modes. *To turn off a continuous shutter mode, select “Off”. 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the sixth Control Panel option from the top (Continuous Shutter). 3.Use [4] and [6] to select the continuous shutter mode you want, and then press [SET]. 4.Press the shutter button to shoot. Images continue to be shot as long as you keep the shutter button depressed. Releasing the shutter button stops shooting. Using...
Page 39
39Snapshot Tutorial NOTE • With continuous shutter, exposure and focus for the first image are applied for successive images as well. • Continuous shutter cannot be used in combination with any of the following. Some BEST SHOT scenes (Business cards and documents, White board, etc., Prerecord (Movie), For YouTube, Voice Recording) • The continuous shutter rate depends on the current image size and image quality settings. • The speed of Normal-speed Continuous Shutter and High-Speed Continuous Shutter...
Page 40
40Snapshot Tutorial ISO sensitivity is a measure of sensitivity to light. 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the seventh Control Panel option from the top (ISO Sensitivity). 3.Use [4] and [6] to select the setting you want and then press [SET]. • “AUTO” ISO sensitivity always is applied for movies, regardless of the current ISO sensitivity setting. Specifying ISO Sensitivity (ISO) AUTOAdjusts sensitivity automatically according to conditions ISO 50Lower sensitivity Higher...