Casio EX S10 User Manual

61Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Continuous
For details, see the Control Panel procedure on page 38.
Procedure
[r] (REC) * [MENU] * REC Tab * Self-timer
With the Self-timer, pressing the shutter button starts a timer. The shutter is released 
and the image is shot after a fixed amount of time.
• The front lamp flashes while the Self-timer countdown is in 
progress.
• You can interrupt an ongoing Self-timer countdown by pressing 
[SET].
NOTE
• The Self-timer cannot be used...

62Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Auto Shutter
For details, see the Control Panel procedure on page 28.
Procedure
[r] (REC) * [MENU] * REC Tab * Face Recognition
For details, see the Control Panel procedure on page 32.
Procedure
[r] (REC) * [MENU] * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject 
movement or camera movement when shooting a moving subject using telephoto, 
when shooting a fast-moving subject, or when...

63Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * AF Area
• “Multi” cannot be selected for the Auto Focus area while you are using Face 
Recognition (page 32).
• “Tracking” cannot be selected for the Auto Focus area while you are using Auto 
Shutter (page 28).
Procedure
[r] (REC) * [MENU] * REC Tab * AF Assist Light
Half-pressing the shutter button while this setting is selected 
causes the front lamp to light, which provides illumination for 
focusing in areas where lighting is dim. Leaving...

64Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Digital Zoom
You can use this setting to turn digital zoom on or off. When digital zoom is turned off, 
operating the zoom controller zooms the image with optical zoom only.
Procedure
[r] (REC) * [MENU] * REC Tab * L/R Key
You can assign one of the five functions listed below to the [4] and [6] keys.
Procedure
[r] (REC) * [MENU] * REC Tab * Quick Shutter
When Quick Shutter is turned on, you can press the shutter button all the way without...

65Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Grid
The on-screen grid can be displayed on the REC mode 
monitor screen for easy vertical and horizontal alignment 
when composing images.
Procedure
[r] (REC) * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a image for about one second 
immediately after you press the shutter button to record it.
Procedure
[r] (REC) * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on...

66Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Memory
When you turn off the camera, it remembers the current settings of all enabled 
memory items and restores them when you turn it back on. Any memory item that is 
disabled will be returned to its initial default setting whenever you turn off the camera.
*Optical zoom setting only.
• If you turn the camera power off and then back on while the BEST SHOT memory 
item is enabled, all of the other memory items (except for zoom position) are...

67Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Size
For details, see the Control Panel procedure on page 25.
Procedure
[r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot)
• The “Fine” setting helps to bring out details when shooting a finely detailed image 
of nature that includes dense tree branches or leaves, or an image of a complex 
pattern.
• Memory capacity (the number of images you can record) will be affected by the 
quality settings you configure (page 161).
Procedure
[r]...

68Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * EV Shift
For details, see the Control Panel procedure on page 41.
Procedure
[r] (REC) * [MENU] * Quality Tab * White Balance
You can adjust white balance to match the source of light available where you are 
shooting and avoid the blue cast that results when shooting outdoors when it is 
cloudy, and the green cast that results when shooting under fluorescent lighting.
• When “Auto” is selected for the white balance setting, the camera...

69Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * ISO
For details, see the Control Panel procedure on page 40.
Procedure
[r] (REC) * [MENU] * Quality Tab * Metering
The metering mode determines what part of the subject is metered for exposure.
• The currently selected metering mode is indicated by an icon on the snapshot 
screen. No icon is displayed when “Multi” is selected as the metering mode.
Specifying ISO Sensitivity (ISO)
Specifying the Metering Mode (Metering)
 MultiMulti-pattern...

70Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Dynamic Range
You can adjust the Dynamic Range setting in order to capture the bright areas of an 
image while reducing the chance of overexposure and underexposure.
• You also can change the dynamic range of a photograph you have already shot 
(page 82).
Procedure
[r] (REC) * [MENU] * Quality Tab * Portrait Refiner
Procedure
[r] (REC) * [MENU] * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and...