Casio EX S10 User Manual

111Using the Camera with a Computer
4.Turn off the camera and 
then use the USB cable 
that comes with the 
camera to connect it to 
your Macintosh.
• The camera does not 
draw power over the USB 
cable. Make sure the 
camera’s battery is 
sufficiently charged 
before connecting.
• Make sure that you insert 
the cable connector into 
the USB/AV port until you 
feel it click securely into 
place. Failure to insert the 
connector fully can result in poor communication or malfunction.
• Note that even while...

112Using the Camera with a Computer
.To view copied images
1.Double-click the camera’s drive icon.
2.Double-click the “DCIM” folder to open it.
3.Double-click the folder that contains the images you want to view.
4.Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 115.
• An image that was rotated on the camera will be displayed on your Macintosh 
screen in its original (unrotated) orientation.
IMPORTANT!
• Never use your computer to...

113Using the Camera with a Computer
You can use QuickTime, which comes bundled with your operating 
system, to play back movies on a Macintosh. To play back a movie, first 
copy it to your Macintosh and then double-click the movie file.
.Minimum System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back 
movies recorded with this camera on a Macintosh.
• The above are recommended system environments. Configuring one of these 
environments does not...

114Using the Camera with a Computer
The camera creates a file and saves it each time you shoot a snapshot, record a 
movie, or perform any other operation that stores data. Files are grouped by storing 
them in folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder 
Structure” (page 115).
• You can view folder and file names on your computer. For details about how file 
names are displayed on the camera’s monitor screen, see page...

115Using the Camera with a Computer
The camera stores images you shoot in accordance with the Design Rule for Camera 
File System (DCF).
.About DCF
DCF is a standard that makes it possible to view and print images recorded on one 
manufacturer’s camera on DCF-compliant devices produced by other manufacturers. 
You can transfer DCF-compliant images recorded with another camera to this 
camera and view them on this camera’s monitor screen.
.Memory Folder Structure
DCIM Folder
Recording Folder
Image File...

116Using the Camera with a Computer
.Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When 
displaying an image recorded on another camera, it may take a long time for the 
image to appear on this camera’s monitor screen.
.Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM 
folder and all of its contents. A...

117Transferring Document Data from Your Computer to the
Camera
Transferring Document Data from Your 
Computer to the Camera
You can use CASIO DATA TRANSPORT to transfer images of documents, digital 
books, web page images, and other document data you can view on your computer 
screen to the camera. Then you will be able to view the documents on the camera’s 
monitor screen.
• Just about any document you can print from your computer can be transferred to 
the camera. Note, however, the ability to properly...

118Transferring Document Data from Your Computer to the
Camera
4.Click the [OK] button.
• This will display a dialog box for configuring data settings.
5.Check the current data settings (date, file name, icon) and then click 
[OK].
This will convert the document data to a JPEG image and transfer the image to 
the camera.
• You can change the date, filename, and icon settings if you want.
• If you want a document image be displayed on the camera’s monitor screen 
using an orientation that is different...

119Transferring Document Data from Your Computer to the
Camera
.To transfer document data to the camera
1.Connect the camera to your Macintosh (page 110).
• Before connecting the camera to your Macintosh, make sure that a memory 
card is loaded in the camera (page 146).
2.On your Macintosh, open the document data that you want to transfer 
to the camera.
3.On the Macintosh menu bar, click “File” * “Print” to display the print 
dialog box.
4.Click the [PDF] button and select “CASIO DATA TRANSPORT” from...

120Transferring Document Data from Your Computer to the
Camera
.To zoom a document page
1.Display the page of the document you want to zoom.
2.Slide the zoom controller towards z to enlarge.
You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor 
screen. Slide the zoom controller towards w to unzoom the image.
– If display indicators are turned on, an indicator in the lower right corner of the 
monitor screen shows what part of the zoomed image is currently displayed.
– To exit the...