Home > Casio > Digital Camera > Casio EX S10 User Manual

Casio EX S10 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Casio EX S10 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 338 Casio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							111Using the Camera with a Computer
    4.Turn off the camera and 
    then use the USB cable 
    that comes with the 
    camera to connect it to 
    your Macintosh.
    • The camera does not 
    draw power over the USB 
    cable. Make sure the 
    camera’s battery is 
    sufficiently charged 
    before connecting.
    • Make sure that you insert 
    the cable connector into 
    the USB/AV port until you 
    feel it click securely into 
    place. Failure to insert the 
    connector fully can result in poor communication or malfunction.
    • Note that even while the connector is fully inserted, you still 
    will be able to see the metal part of the connector as shown in 
    the illustration.
    • When connecting the USB cable to a USB port, make sure 
    you align the connector correctly with the port.
    5.Turn on the camera.
    The camera’s back lamp will light green at this time. In this mode, your Macintosh 
    recognizes the memory card loaded in the camera (or the camera’s built-in 
    memory if it does not have a memory card loaded) as a drive. The appearance of 
    the drive icon depends on the Mac OS version you are using.
    6.Double-click the camera’s drive icon.
    7.Drag the “DCIM” folder to the folder to which you want to copy it.
    8.After the copy operation is complete, drag the drive icon to Trash.
    9.On the camera, press [ON/OFF] to turn off the camera. After making 
    sure that the green back lamp is unlit, disconnect the camera from the 
    computer.
    USB port
    USB cable
    Making sure that the 2 mark 
    on the camera is aligned with 
    the 8 mark of the USB cable 
    connector, connect the cable 
    to the camera.USB/AV 
    port Large connector
    Small 
    connector 
    						
    							112Using the Camera with a Computer
    .To view copied images
    1.Double-click the camera’s drive icon.
    2.Double-click the “DCIM” folder to open it.
    3.Double-click the folder that contains the images you want to view.
    4.Double-click the image file you want to view.
    • For information about file names, see “Memory Folder Structure” on page 115.
    • An image that was rotated on the camera will be displayed on your Macintosh 
    screen in its original (unrotated) orientation.
    IMPORTANT!
    • Never use your computer to modify, delete, move, or rename any image files that 
    are in the camera’s built-in memory or on its memory card. Doing so can cause 
    problems with the camera’s image management data, which will make it impossible 
    to play back images on the camera and can drastically alter remaining memory 
    capacity. Whenever you want to modify, delete, move, or rename an image, do so 
    only on images that are stored on your computer.
    • Never unplug the USB cable, or operate the camera while viewing or storing 
    images. Doing so can cause data to become corrupted.
    If you are running Mac OS X, you can use the iPhoto application that comes bundled 
    with the operating system to manage your images. If you are running Mac OS 9, you 
    will need to use commercially available software.
    Transferring Images Automatically and Managing Them on 
    Your Macintosh 
    						
    							113Using the Camera with a Computer
    You can use QuickTime, which comes bundled with your operating 
    system, to play back movies on a Macintosh. To play back a movie, first 
    copy it to your Macintosh and then double-click the movie file.
    .Minimum System Requirements for Movie Playback
    The minimum system requirements described below are necessary to play back 
    movies recorded with this camera on a Macintosh.
    • The above are recommended system environments. Configuring one of these 
    environments does not guarantee proper operation.
    • Even if your Macintosh meets the minimum requirements described above, certain 
    settings and other installed software may interfere with proper playback of movies.
    • Movie file playback is not supported under OS 9.
    You must have Adobe Reader or Adobe Acrobat Reader installed on your computer 
    in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems 
    Incorporated website and install Acrobat Reader.
    1.On the CD-ROM, open the “Manual” folder.
    2.Open the “Digital Camera” folder and then open the folder for the 
    language whose user’s guide you want to view.
    3.Open the file named “camera_xx.pdf”.
    • “xx” is the language code (Example: camera_e.pdf is for English.)
    Internet registration only is supported. Visit the following CASIO website to register:
    http://world.casio.com/qv/register/
    Playing a Movie
    Operating System : Mac OS X 10.3.9 or higher 
    QuickTime Version : QuickTime 7 or higher
    Viewing User Documentation (PDF Files)
    User Registration 
    						
    							114Using the Camera with a Computer
    The camera creates a file and saves it each time you shoot a snapshot, record a 
    movie, or perform any other operation that stores data. Files are grouped by storing 
    them in folders. Each file and folder has its own unique name.
    • For details about how folders are organized in memory, see “Memory Folder 
    Structure” (page 115).
    • You can view folder and file names on your computer. For details about how file 
    names are displayed on the camera’s monitor screen, see page 151.
    • The total number of folders and files allowed depends on the image size and 
    quality, and capacity of the memory card being used for storage.
    Files and Folders
    Name and Maximum Number AllowedExample
    File
    Each folder can contain up to 9999 files named 
    CIMG0001 through CIMG9999. The extension 
    on the file name depends on the file type.26th file name:
    Folders
    Folders are named from 100CASIO to 
    999CASIO
    There can be up to 900 folders in memory.
    • The BEST SHOT mode (page 50) includes a 
    sample scene that optimizes settings for 
    auction site images. Depending on your 
    camera model, the sample scene is named 
    either “For eBay” or “Auction”.
    – Images recorded with the eBay scene are 
    stored in a folder named “100_EBAY”.
    – Images recorded with the Auction scene 
    are stored in a folder named “100_AUCT”.
    • BEST SHOT also has a scene named “For 
    YouTube” that optimizes movie settings for 
    recording movies for upload to YouTube. 
    Images recorded with the YouTube scene 
    are stored in a folder named “100YOUTB”. 100th folder name:
    CIMG0026.JPG
    Extension
    Serial number (4 digits)
    100CASIO
    Serial number (3 digits) 
    						
    							115Using the Camera with a Computer
    The camera stores images you shoot in accordance with the Design Rule for Camera 
    File System (DCF).
    .About DCF
    DCF is a standard that makes it possible to view and print images recorded on one 
    manufacturer’s camera on DCF-compliant devices produced by other manufacturers. 
    You can transfer DCF-compliant images recorded with another camera to this 
    camera and view them on this camera’s monitor screen.
    .Memory Folder Structure
    DCIM Folder
    Recording Folder
    Image File
    Movie File
    Audio File
    Audio Snapshot Image File
    Audio Snapshot Audio File
    Recording Folder
    Recording Folder
    DPOF File Folder
    DPOF File
    Snapshot BEST SHOT Folder
    Snapshot BEST SHOT User Setup File
    Snapshot BEST SHOT User Setup File
    Movie BEST SHOT Folder
    Movie BEST SHOT User Setup File
    Movie BEST SHOT User Setup File
    Family Face Folder
    Background Music Folder
    Background Music File
    Background Music File
    Startup Image File
    *1Other folders are created when the following BEST SHOT scenes are used for 
    recording: “For eBay” or “Auction” (scene name depends on camera model), or “For 
    YouTube”. The following shows the name of the folder created for each scene.
    •eBay scene: 100_EBAY•Auction scene: 100_AUCT•YouTube scene: 100YOUTB*2This folder can be created in built-in memory only.
    Memory Card Data
    DCIM
    100CASIO *1
    CIMG0001.JPG
    CIMG0002.MOVCIMG0003.WAV
    CIMG0004.JPG
    CIMG0004.WAV
    101CASIO *
    1
    102CASIO *1
    MISC
    AUTPRINT.MRK
    SCENE *
    2
    UES10001.JPE
    UES10002.JPE
    MSCENE *
    2
    UES10001.JPE
    UES10002.JPE
    FAMILY *
    2
    SSBGM
    SSBGM001.WAV
    SSBGM002.WAV
    STARTING.JPG *
    2 
    						
    							116Using the Camera with a Computer
    .Supported Image Files
    • Image files shot with this camera
    • DCF-compliant image files
    This camera may not be able to display an image, even if it is DCF-compliant. When 
    displaying an image recorded on another camera, it may take a long time for the 
    image to appear on this camera’s monitor screen.
    .Built-in Memory and Memory Card Data Handling Precautions
    • Whenever copying memory contents to your computer, you should copy the DCIM 
    folder and all of its contents. A good way to keep track of multiple DCIM copies of 
    the DCIM folders it to change its name to a date or something similar after you copy 
    it to your computer. If you later decided to return the folder to the camera, however, 
    be sure to change its name back to DCIM. The camera is designed to recognize 
    only a root file with the name DCIM. Note the camera also will not be able to 
    recognize the folders inside the DCIM folder unless they have the names they 
    originally had when you copied them from the camera to your computer.
    • Folders and files must be stored in accordance with the “Memory Folder Structure” 
    shown on page 115 in order for the camera to be able to recognize them correctly.
    • You also can use a PC card adapter or a memory card reader/writer to access 
    camera files directly from the camera’s memory card. 
    						
    							117Transferring Document Data from Your Computer to the
    Camera
    Transferring Document Data from Your 
    Computer to the Camera
    You can use CASIO DATA TRANSPORT to transfer images of documents, digital 
    books, web page images, and other document data you can view on your computer 
    screen to the camera. Then you will be able to view the documents on the camera’s 
    monitor screen.
    • Just about any document you can print from your computer can be transferred to 
    the camera. Note, however, the ability to properly transfer and display any 
    particular type of data is not guaranteed.
    • Images of certain types of data may appear differently on the camera from the way 
    they appear on your computer screen.
    To transfer document data on your computer to the camera so you can view it on the 
    monitor screen, you need to install the CASIO DATA TRANSPORT application from 
    the CD-ROM that comes with the camera.
    .To install CASIO DATA TRANSPORT
    1.On the CD-ROM menu screen (page 104), select “DATA TRANSPORT”.
    2.After reading the information about installation conditions and system 
    requirements for installation in the “Read me” file, install CASIO DATA 
    TRANSPORT.
    .To transfer document data to the camera
    1.Connect the camera to your computer (page 101).
    • Before connecting the camera to your computer, make sure that a memory 
    card is loaded in the camera (page 146).
    2.On your computer, open the document data that you want to transfer to 
    the camera.
    3.On the menu bar of the application you used to open the document 
    data, select “File” * “Print” to display the print dialog box. Click the 
    “Printer Name” down arrow button and then select “CASIO DATA 
    TRANSPORT” from the list that appears.
    Transferring Document Data to the Camera
    Transferring Data from a Computer Running Windows 
    						
    							118Transferring Document Data from Your Computer to the
    Camera
    4.Click the [OK] button.
    • This will display a dialog box for configuring data settings.
    5.Check the current data settings (date, file name, icon) and then click 
    [OK].
    This will convert the document data to a JPEG image and transfer the image to 
    the camera.
    • You can change the date, filename, and icon settings if you want.
    • If you want a document image be displayed on the camera’s monitor screen 
    using an orientation that is different from that used on the computer screen, 
    click the [Properties] button on the print dialog box, and then change the 
    “Orientation” setting.
    Before installing CASIO DATA TRANSPORT be sure to read any “readme” file that 
    accompanies it. “readme” files contain important information about installation, 
    including installation conditions and computer system requirements.
    .To install CASIO DATA TRANSPORT
    1.Place the CD-ROM that comes bundled with the camera into your 
    Macintosh CD-ROM drive.
    2.Open the folder named “DATA TRANSPORT”.
    3.Double-click “TRANSPORT_Installer”.
    4.Follow the instructions that appear on your screen to install the 
    software.
    Transferring Data from a Macintosh 
    						
    							119Transferring Document Data from Your Computer to the
    Camera
    .To transfer document data to the camera
    1.Connect the camera to your Macintosh (page 110).
    • Before connecting the camera to your Macintosh, make sure that a memory 
    card is loaded in the camera (page 146).
    2.On your Macintosh, open the document data that you want to transfer 
    to the camera.
    3.On the Macintosh menu bar, click “File” * “Print” to display the print 
    dialog box.
    4.Click the [PDF] button and select “CASIO DATA TRANSPORT” from the 
    list that appears.
    This will display a dialog box for configuring data settings.
    5.Check the current data settings (date, file name, icon) and then click 
    [OK].
    This will convert the document data to a JPEG image and transfer the image to 
    the camera.
    • You can change the date, filename, and icon settings if you want.
    1.In the PLAY mode, press [BS] (^).
    This enters the data mode and displays a menu of document images currently in 
    camera memory.
    • Pressing [BS] (^) again will return to the PLAY mode.
    2.Use the [8], [2], [4], and [6] to move the selection boundary to the 
    document image you want to select, and then press [SET].
    This will display the image of the document you selected.
    3.View the document pages.
    • All the pages of document data on a memory card will be printed if you use the 
    card to transfer image data to a printer or a professional print service (page 
    95).
    To view document images on the camera
    [4][6]Scroll between pages
    [SET] Toggles between the document menu screen and document page 
    						
    							120Transferring Document Data from Your Computer to the
    Camera
    .To zoom a document page
    1.Display the page of the document you want to zoom.
    2.Slide the zoom controller towards z to enlarge.
    You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor 
    screen. Slide the zoom controller towards w to unzoom the image.
    – If display indicators are turned on, an indicator in the lower right corner of the 
    monitor screen shows what part of the zoomed image is currently displayed.
    – To exit the zoom screen, press [MENU] or [BS] (^).
    – Though the maximum image zoom factor is 8X, certain image sizes may not 
    allow zooming up to the full 8X.
    .To rotate a document page
    1.Display any page in the document that contains the page you want to 
    rotate and then press [MENU].
    2.On the “DATA” tab, select “Rotation”, and then press [6].
    3.Use [4] and [6] to select “Rotate”, and then press [SET].
    Each press of [SET] will rotate the displayed image 90 degrees left.
    4.When the displayed image is at the orientation you want, press 
    [MENU]. 
    						
    All Casio manuals Comments (0)

    Related Manuals for Casio EX S10 User Manual