Casio EX S10 User Manual

							81Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * 
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a 
specific part of a movie.
1.Use [8] and [2] to select the editing method you want to use and then 
press [SET].
2.Use [4] and [6] to scroll through the movie 
and search for the frame (point) from which 
or to which you want to cut the movie (the cut 
point).
• You also can search for the cut location by 
playing back the movie and pressing [SET] to 
pause. During playback, you can press [4] or [6] 
to perform fast reverse or fast forward.
3.When the frame where you want the cut point to be is displayed, press 
[2].
4.Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to 
perform any camera operation until the “Busy... Please wait...” message 
disappears from the monitor screen. Note that a cut operation can take a long 
time if the movie being edited is long.
Editing a Movie on the Camera (Movie Editing)
 Cut (To-Point Cut)Cuts everything from the beginning of the movie 
up to the current location.
 Cut (Point-To-Point Cut)Cuts everything between two points.
 Cut (From-Point Cut)Cuts everything from the current location to the 
end of the movie.
 Cut
(To-Point Cut)While the frame you want the cut to be up to is 
displayed, press [2].
 Cut
(Point-To-Point Cut)1While the frame you want the first (From) cut to be is 
displayed, press [2].
2While the frame you want the second (To) cut to be 
is displayed, press [2].
 Cut
(From-Point Cut)While the frame you want the cut to be from is 
displayed, press [2].
}
~
¡
Cut range (red)
}
~
¡
C 
						

							82Other Playback Functions (PLAY)
NOTE
• When you edit a movie, only the result is saved. The original movie is not retained. 
An editing operation cannot be undone.
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is 
less than the size of the movie file you want to edit. If there is not enough memory 
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a 
single movie are not supported.
• You also can start a movie editing operation while the movie you want to edit is 
playing back. Press [SET] to pause playback, and then press [2] to display the 
menu of editing options. Perform editing using the same procedures as described 
above.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
Dynamic Range
This setting can be used to suppress underexposure, while maintaining image 
brightness.
NOTE
• You also can adjust the dynamic range when recording images (page 70).
• Altering the dynamic range of an image causes the original image and the new 
(altered) version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and 
time indicates when the image was originally recorded, not when the image was 
altered.
Reducing the Effects of Underexposure (Dynamic Range)
Expand +2Suppresses underexposure more than “Expand +1”
Expand +1Suppresses underexposure
CancelNo suppression of underexposure 
						

							83Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
White Balance
You can use the white balance setting to select a light source type for a recorded 
image, which will affect the colors of the image.
NOTE
• You also can adjust the white balance when recording images (page 68).
• Altering the white balance of an image causes the original image and the altered 
version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and 
time indicates when the image was originally recorded, not when the image was 
altered.
Adjusting White Balance (White Balance)
 DaylightOutdoors, fair weather
 OvercastOutdoors, cloudy to rain, in tree shade, etc.
 ShadeVery high temperature light, such as building shade, etc.
 Day White 
FluorescentWhite or daylight fluorescent lighting, without suppressing 
color cast
 Daylight 
FluorescentWhite or daylight fluorescent lighting, while suppressing color 
cast
 TungstenSuppressing of the appearance of light bulb lighting
CancelNo white balance adjustment
¤



…
« 
						

							84Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
Brightness
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).
• When you display an altered image on the camera’s monitor screen, the date and 
time indicates when the image was originally recorded, not when the image was 
altered.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Keystone
You can use keystone correction to correct rectangular and square shapes in a 
snapshot that do not appear normal because they were not shot straight on. The 
corrected image is saved as 2M (1600
x1200 pixels) size.
1.Use [4] and [6] to select the shape in the 
snapshot that you want to correct.
2.Use [8] and [2] to select “Correct” and then 
press [SET].
• If the original image is smaller than 2M 
(1600x1200 pixels) size, the new (corrected) 
version will be the same size as the original.
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date 
and time indicates when the image was originally recorded, not when the 
image was altered.
Adjusting the Brightness of an Existing Snapshot 
(Brightness)
Keystone Correction (Keystone) 
						

							85Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
Color Correction
Color Correction lets you correct the color of an old photograph. The corrected image 
is saved as 2M (1600x1200 pixels) size.
1.Perform the above operation.
• An image of the photograph you are restoring will appear on the monitor 
screen with a red boundary around it. If there is a black boundary, it means that 
the camera detected more than one rectangular area in the image. Use [4] 
and [6] to move the boundary and select the area of the photograph.
2.Use [8] and [2] to select “Trim”, and then press [SET].
This will display a selection boundary for trimming the on-screen image.
3.Slide the zoom controller to resize the selection boundary and specify 
the image size you want.
4.Use [8], [2], [4], and [6] to move the selection boundary to it 
encloses the area of the image you want to trim to and then press 
[SET].
NOTE
• If the original image is smaller than 2M (1600x1200 pixels) size, the new 
(corrected) version will be the same size as the original.
• The original snapshot is retained in memory and not deleted.
• If you do not want a border around the resulting image, select an area that is 
smaller than the original image.
• When you display a color corrected image on the camera’s monitor screen, the 
date and time indicates when the image was originally recorded, not when the 
image was color corrected.
Using Color Correction to Correct the Color of an Old 
Photograph (Color Correction) 
						

							86Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * DPOF Printing
See page 95 for details.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Protect
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 132).
Selecting Images for Printing (DPOF Printing)
Protecting a File Against Deletion (Protect)
OnProtects specific files.
1Use [4] and [6] to scroll through the 
files until the one you want to protect 
is displayed.
2Use [8] and [2] to select “On” and 
then press [SET].
An image that is protected is indicated 
by the ‰ icon.
3To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [MENU]. To unprotect a file, 
select “Off” instead of “On” in step 2 above. 
All Files: 
OnProtects all files.1Use [8] and [2] to select “All Files: On” and then press [SET].
2Press [MENU].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in 
step 1 above. 
						

							87Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Date/Time
When the date and time settings are what you want, press [SET] to apply them.
NOTE
• The date and time stamped into an image using the Time Stamp (page 127) cannot 
be edited.
• You cannot edit the date and time of an image that is protected.
• You can input any date from 1980 to 2049.
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] * PLAY Tab * 
Rotation
1.Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2.When the displayed image is at the orientation you want, press 
[MENU].
NOTE
• Note that this procedure does not actually change the image data. It simply alters 
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the 12-image 
screen, the calendar screen, and image roulette.
Editing the Date and Time of an Image (Date/Time)
[8][2]Changes the setting at the cursor location
[4][6]Moves the cursor between settings
[BS] (^)Toggles between 12-hour and 24-hour format
Rotating an Image (Rotation) 
						

							88Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. 
The original snapshot is also retained. You can select resize an image to one of three 
image sizes: 7M, 4M, VGA.
• Resizing a 16:9 or 3:2 size snapshot will create an image with an aspect ratio of 
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the 
recording date of the original snapshot.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming
You can crop a snapshot to trim parts you do not need, 
and save the result in a separate file. The original 
snapshot is also retained.
Use the zoom controller to zoom the image to the size 
you want, use [8], [2], [4], and [6] to display the 
portion of the image you want to cut out, and then press 
[SET].
• The image produced by cropping a 3:2 or 16:9 image 
will have an aspect ratio of 4:3.
• The recording date of the cropped image will be the 
same as the recording date of the original snapshot.
Resizing a Snapshot (Resize)
Cropping a Snapshot (Trimming)
Represents
snapshot area
Part of snapshot that is
currently displayed
Zoom factor 
						

							89Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Dubbing
You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s 
audio whenever you want. You can record up to about 30 seconds of audio for a 
single snapshot.
1.Press the shutter button to start audio 
recording.
2.Press the shutter button again to stop audio recording.
• Take care that you do not block the camera’s microphone 
with your fingers while recording.
• Good recording results are not possible when the camera is 
too far away from what you are trying to record.
• Your camera supports the following audio data formats.
– Audio Format: WAVE/IMA-ADPCM (WAV extension)
– Approximate Audio File Size:
165KB (Approximately 30 seconds of recording at 5.5KB 
per second)
• Adding audio (dubbing) is not possible for the following types of images.
– Images created using MOTION PRINT
– Protected images
• To delete audio, perform the following operation:
Dubbing * Delete * [SET] * [MENU].
IMPORTANT!
• Note that you cannot restore the original audio of an Audio Snapshot after you 
delete or re-record it.
Adding Audio to a Snapshot (Dubbing)
Remaining recording time
Microphone 
						

							90Other Playback Functions (PLAY)
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a  icon.
2.Press [SET] to start playback.
Voice Recording Playback Controls
• Audio of an Audio Snapshot also can be played back on a computer with Windows 
Media Player or QuickTime.
To play snapshot audio
Fast forward/fast reverse[4] [6]
Play/pause[SET] 
Volume adjustmentPress [2] and 
then press [8] [2]
Display content switching[8] (DISP)
Stop playback[MENU]
C