Casio EX S10 User Manual

							151Appendix
.Movie Recording
Panel : On
Panel : Off1Focus mode (page 58)
2White balance setting (page 68)
3Recording mode (page 45)
4Remaining movie memory capacity 
(page 45)
5Movie recording time (page 45)
6Exposure compensation (page 41)
7Battery level indicator (page 12)
8Histogram (page 133)
9Anti Shake (page 62)
354
7 8
9
6
12
12 3
76 8
9
45
.Snapshot Viewing
1File type
2Protect indicator (page 86)
3Folder name/file name (page 114)
4Snapshot image quality (page 67)
5Snapshot image size (page 24)
6ISO sensitivity (page 40)
7Aperture value
8Shutter speed
9Date/time (page 42)
bkMetering mode (page 69)
blWhite balance setting (page 83)
bmFlash mode (page 26)
bnRecording mode
boBattery level indicator (page 12)
bpHistogram (page 133)
bqExposure compensation (page 41)
321
bp
bq
bo blbkbm bn
4
7 5
8
9 6
C 
						

							152Appendix
.Movie Playback
1File type
2Protect indicator (page 86)
3Folder name/file name (page 114)
4Movie recording time (page 72)
5Movie image quality (page 67)
6Date/time (page 42)
7Battery level indicator (page 12)
1
4
5
723
6
The tables in this section show the initial default settings that are configured for menu 
items (displayed when you press [MENU]) after you reset the camera (page 132). 
Menu items depend on whether the camera is in the REC mode or PLAY mode.
• A dash (–) indicates an item whose setting is not reset or an item for which there is 
no reset setting.
.REC Mode
“REC” Tab
Reset Initial Default Settings
FocusQ 
(Auto Focus)
ContinuousOff
Self-timerOff
Auto ShutterOff
Face 
RecognitionOff
Anti ShakeOff
AF AreaU 
Spot
AF Assist 
LightOn
Digital ZoomOn
L/R KeyOff
Quick ShutterOn
GridOff
ReviewOn
Icon HelpOn
Memoryb
 BEST SHOT: 
Off / Auto Shutter: 
Off / Flash: On / 
Focus: Off / White 
Balance: Off / ISO: 
Off / AF Area: On / 
Metering: Off / 
Continuous: Off / 
Self-timer: Off / Flash 
Intensity: Off / Digital 
Zoom: On / MF 
Position: Off / Zoom 
Position: Off 
						

							153Appendix
“Quality” Tab
“Set Up” Tab
Size10M (3648x2736)
 Quality 
(Snapshots)Normal
 Quality 
(Movies)HQ
EV Shift0.0
White BalanceAuto
ISOAuto
MeteringB
 Multi
T
»
Dynamic RangeOff
Portrait RefinerOff
Color FilterOff
Sharpness0
Saturation0
Contrast0
Flash Intensity0
Flash AssistAuto
 PanelOn
 DisplayWide
ScreenAuto 2
Sounds–
StartupOff
File No.Continue
World TimeHome
TimestampOff
Adjust–
Date Style–
R
P
Language–
DATA ViewList View
Sleep1 min
Auto Power Off1 min
REC/PLAYPower On
USBMass Storage
Video OutNTSC 4:3
Format–
Reset–
C 
						

							154Appendix
.PLAY Mode
“PLAY” Tab
“Set Up” Tab
• The contents of the “Set Up” tab are the same in the REC mode and PLAY mode.
Slideshow–
Layout Print–
MOTION PRINT9 frames
Movie Editing–
Dynamic Range–
White Balance–
Brightness0
Keystone–
Color Correction–
DPOF Printing–
Protect–
Date/Time–
Rotation–
Resize7M (3072x2304)
Trimming–
Dubbing–
Copy– 
						

							155Appendix
When things don’t go right... 
Troubleshooting
ProblemPossible Cause and Recommended Action
Power Supply
Power does not 
turn on. 1)The battery may not be loaded correctly (page 12).
2)The battery may be dead. Charge the battery (page 11). If the 
battery goes dead soon after being charged, it means the 
battery has reached the end of its life and needs to be 
replaced. Purchase a separately available CASIO NP-60 
rechargeable lithium ion battery.
The camera 
suddenly powers 
down.1)Auto Power Off may have activated (page 130). Turn power 
back on.
2) The battery may be dead. Charge the battery (page 11).
3) The camera’s protection function may have activated 
because camera temperature is too high. Turn off the camera 
and wait until it cools down before trying to use it again.
Power will not turn 
off. Nothing 
happens when a 
button is pressed.Remove the battery from the camera and then reload it.
Image Recording
Image is not 
recorded when the 
shutter button is 
pressed. 1)If the camera is in the PLAY mode, press [r
] (REC) to enter 
the REC Mode.
2) If the flash is charging, wait until the charge operation 
finishes.
3) If the message “Memory Full” appears, transfer images to 
your computer, delete images you no longer need, or use a 
different memory card.
Auto Focus does 
not focus properly 1)If the lens is dirty, clean it off.
2)The subject may not be in the center of the focus frame when 
you compose the image.
3) The subject you are shooting may not be a type that is 
compatible with Auto Focus (page 21). Use manual focus 
(page 58).
4) You may be moving the camera when shooting. Try shooting 
with Anti Shake or use a tripod.
5)You may be pressing the shutter button all the way without 
waiting for Auto Focus. Half-press the shutter button and 
allow enough time for Auto Focus to focus.
The subject is out 
of focus in the 
recorded image.The image may not be focused properly. When composing the 
image, make sure the subject is located inside the focus frame. 
						

							156Appendix
The flash does not 
fire. 1)If ?
 (Flash Off) is selected as the flash mode, change to 
another mode (page 26).
2) If the battery is dead, charge it (page 11).
3) If a BEST SHOT scene that uses ?
 (Flash Off) is selected, 
change to a different flash mode (page 26) or select a 
different BEST SHOT scene (page 50).
Camera powers 
down during Self-
timer countdown.The battery may be dead. Charge the battery (page 11).
The monitor screen 
image is out of 
focus.1) You may be using Manual Focus and have not focused the 
image. Focus the image (page 58).
2)You may be using ´
 (Macro Mode) for scenery or portraits. 
Use Auto Focus for scenery and portrait shots (page 58).
3) You may be trying to use Auto Focus or )
 (Infinity Mode) 
when shooting a close-up shot. Use the ´
 (Macro Mode) for 
close ups (page 58).
There is a vertical 
line in the monitor 
screen image. Shooting a very brightly lit subject can cause a vertical band to 
appear in the monitor screen image. This is a CCD 
phenomenon known as “vertical smear”, and does not indicate 
malfunction of the camera. Note that vertical smear is not 
recorded with the image in the case of a snapshot, but it is 
recorded in the case of a movie.
There is digital 
noise in images.1) Sensitivity may have been increased automatically for a dark 
subject, which increases the chance of digital noise. Use a 
light or some other means to illuminate the subject.
2) You may be attempting to shoot in a dark location with ?
 
(Flash Off) selected, which can increase digital noise and 
make images appear coarse. In this case, turn on flash (page 
26) or use lights for illumination.
3)Flash assist or dynamic range may be enabled for snapshots, 
which can cause an increase in digital noise. Use a light or 
some other means to illuminate the subject.
A recorded image 
was not saved.1)Camera power may have been turned off before the save 
operation was complete, which will result in the image not 
being saved. If the battery indicator shows  , charge the 
battery as soon as possible (page 12).
2) You may have removed the memory card from the camera 
before the save operation was complete, which will result in 
the image not being saved. Do not remove the memory card 
before the save operation is complete.
Though available 
lighting is bright, 
the faces of people 
in the image are 
dark.Not enough light is reaching the subjects. Change the flash 
mode setting to <
 (Flash On) for daylight synchro flash (page 
26), or adjust EV shift to the + side (page 41).
ProblemPossible Cause and Recommended Action 
						

							157Appendix
Subjects are too 
dark when shooting 
images in a 
seashore or ski 
area.Sunlight reflected by water, sand, or snow, can cause 
underexposure of images. Change the flash mode setting to <
 
(Flash On) for daylight synchro flash (page 26), or adjust EV 
shift to the + side (page 41).
The focus frame 
does not appear on 
the monitor screen.Normally, turning off the camera while “Detect Smile” is 
selected for Auto Shutter will cause the camera’s face 
recognition setting to change to “Normal”. You will need to 
change the face recognition setting again after turn on the 
camera. You can tell the camera to remember the Auto Shutter 
setting by selecting “On” for the “Auto Shutter” power on default 
setting (page 66). 
Digital zoom 
(including HD 
zoom) does not 
work. The zoom 
bar indicates zoom 
only up to a zoom 
factor of 3.0.1) The digital zoom setting may be turned off. Turn on digital 
zoom (page 64).
2) Date stamping may be turned on, which will cause digital 
zoom to be disabled. Turn off date stamping (page 127).
A family member’s 
face is not detected 
correctly, even 
though the face 
has been pre-
recorded.Though face characteristics were pre-recorded for your family 
member, the data may have been faulty. Other possible causes 
may be shooting at an angle or the facial features of the subject. 
Try re-recording the face of the family member who is not being 
detected (page 33).
When shooting 
with Auto Shutter, 
the shutter does 
not trigger.Auto Shutter may not trigger when shooting under very bright or 
very dark conditions, or when shooting a fast moving subject, 
etc. If this happens, try changing the Auto Shutter Trigger 
Sensitivity setting (page 30), or press the shutter button all the 
way down to release the shutter and shoot the image.
The image is out of 
focus during movie 
recording.1) Focusing may not be possible because the subject is outside 
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 140).
Playback
The color of the 
playback image is 
different from what 
appears on the 
monitor screen 
when shooting.Sunlight or light from another source may be shining directly 
into the lens when you are shooting. Position the camera so 
sunlight does not shine directly into the lens.
Images are not 
displayed.This camera cannot display non-DCF images recorded onto a 
memory card using another digital camera.
ProblemPossible Cause and Recommended Action
C 
						

							158Appendix
Images cannot be 
edited (with Layout 
Print, resizing, 
trimming, keystone 
correction, color 
restoration, date/
time editing, 
rotation).Note that you cannot edit the following types of snapshots.
• Snapshots created using MOTION PRINT
•Movies
• Snapshots recorded with another camera
Other
The wrong date 
and time are 
displayed.The date and time setting is off. Set the correct date and time 
(page 128).
The messages on 
the display are in 
the wrong 
language.The wrong display language is selected. Change the display 
language setting (page 129).
Images cannot be 
transferred over a 
USB connection.1) The USB cable may not be connected securely. Check all 
connections.
2) Your computer is running Windows 98SE or 98 and does not 
have the USB driver installed. Install the USB driver (page 
101). You can download the USB driver from the Official 
CASIO Digital Camera Website at http://www.exilim.com/
3) Your computer is running Windows 98SE or 98 and does not 
have the USB driver installed correctly. Reinstall the USB 
driver correctly (page 101).
4) The wrong USB communication protocol is selected. Select 
the correct USB communication protocol in accordance with 
the type of device you are connecting (pages 101, 110).
5)If the camera is not turned on, turn it on. 
Language selection 
screen appears 
when the camera is 
turned on.1) You did not configure initial settings after purchasing the 
camera or the battery may have been left with a dead battery. 
Check the camera setup (pages 13, 129).
2) There may be a problem with the camera’s memory data. If 
this is the case, perform the reset operation to initialize the 
camera’s setup (page 132). After that, configure each setting. 
If the language selection screen does not re-appear when you 
turn the camera on, it means that the camera’s memory 
management data has been restored.
If the same message appears after you turn power back on, 
contact your retailer or a CASIO authorized service center.
ProblemPossible Cause and Recommended Action
C 
						

							159Appendix
Display Messages
ALERTThe camera’s protection function may have activated 
because camera temperature is too high. Turn off the camera 
and wait until it cools down before trying to use it again.
Battery is low.Battery power is low.
Cannot correct 
image!Keystone correction of the image cannot be performed for 
some reason. The image will be stored as-is, without 
correction (page 53).
Cannot find the 
file.The image you specified with the slideshow “Images” setting 
cannot be found. Change the “Images” setting (page 77) and 
try again.
Cannot register 
any more files.You are attempting to save a user BEST SHOT scene in the 
“SCENE” folder when the folder already contains 999 user 
scenes (page 52).
Card ERRORThere is something wrong with the memory card. Turn off the 
camera, remove the memory card and then reload it into the 
camera. If this message re-appears when you turn the 
camera back on, format the memory card (page 132).IMPORTANT!
• Formatting a memory card deletes all its files. Before 
formatting, try transferring recoverable files to a computer 
or some other storage device.
Check 
connections!• You are attempting to connect the camera to a printer while 
the camera’s USB settings are not compatible with the USB 
system of the printer (page 93).
• Your computer is running Windows 98SE or 98 and does 
not have the USB driver installed (page 101).
Files could not be 
saved because 
battery is low.Battery power is low, so an image file could not be saved. 
Folder cannot be 
created.You are trying to record a file while there are already 9999 
files stored in the 999th folder. If you want to record more, 
delete files you no longer need (page 20).
LENS ERRORThis message appears and the camera turns off whenever 
lens performs some unexpected operation. If the same 
message appears after you turn power back on, contact a 
CASIO authorized service center or your original retailer.
Load paper!The printer ran out of paper while printing.
Memory FullMemory is full with images you recorded and/or files saved by 
editing operations. Delete files you no longer need (page 20).
C 
						

							160Appendix
Printing ErrorAn error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Record ErrorImage compression could not be performed for some reason 
during image data storage. Shoot the image again.
RETRY POWER 
ONThe lens came into contact with an obstruction while moving. 
The camera will turn off automatically when this message 
appears. Remove the obstruction and turn power back on 
again.
SYSTEM ERRORYour camera system is corrupted. Contact your retailer or an 
authorized CASIO authorized service center.
The card is 
locked.The LOCK switch of the SD or SDHC memory 
card loaded in the camera is in the locked 
position. You cannot store images to or delete 
images from a memory card that is locked.
There are no files.There are no files in built-in memory or on the memory card.
There are no 
printing images.
Set up DPOF.There are currently no files specified for printing. Configure 
the required DPOF settings (page 95).
There is no image 
to register.The setup you are trying to save is for an image that cannot 
be saved as a user BEST SHOT scene.
This card is not 
formatted.The memory card loaded in the camera is not formatted. 
Format the memory card (page 132).
This file cannot be 
played.The file you are trying to access is corrupted or is a type that 
cannot be displayed by this camera.
This function 
cannot be used.You attempted to copy images from built-in memory to a 
memory card while there is no memory card loaded in the 
camera (page 91).
LOCK
C