Casio EX FC200S User Manual

							61Recording Movies
.To shoot a Prerecord Movie
1.After using the above procedure to set up the camera for Prerecord 
Movie, point the camera at the subject.
2.When you are ready to record, press [0] (Movie).
This will save the approximately five seconds of action that was prerecorded in 
the buffer before you pressed [0] (Movie) (two seconds if you are using high 
speed movie) and start real-time recording.
3.Press [0] (Movie) again to stop recording.
• To stop Prerecord (Movie) recording and return to snapshot shooting, select a 
different BEST SHOT scene (page 64), or change the recording mode to R 
(Auto) or Ÿ (Premium Auto) (page 28).
• When shooting with the high speed movie “HS30-120” and “HS30-240” setting, 
you cannot change the speed (fps) setting while the camera is pre-recording to 
the buffer in step 1 of the above procedure. You can change the speed (fps) 
setting after you press [0] (Movie) to start real-time recording.
NOTE
• While the camera is set up for shooting with Prerecord Movie, pressing the shutter 
button will not shoot a snapshot unless movie recording is in progress. With high-
definition (FHD) and standard (STD) movie, you can shoot still images while real-
time movie recording is in progress.
• When shooting with Prerecord Movie in combination with high speed movie, 
pressing the [4] or [6] key will not change the EV shift or white balance setting, 
even if “EV Shift” or “White Balance” is assigned for the “L/R Key” function. To 
change the EV shift or white balance setting in this case, use the control panel. 
						

							62Recording Movies
The “For YouTube” scene records movies in a format that is optimal for uploading to 
the YouTube movie site, which is operated by YouTube, LLC. “For YouTube” can be 
used when shooting a standard (STD) movie, a high-definition (FHD) movie, or a high 
speed (HS) movie.
1.In the REC mode, press [MENU].
2.Use [4] and [6] to select the “Quality” tab.
3.Use [8] and [2] to select “» Quality” and then press [6].
4.Use [8] and [2] to select the movie mode you want to use for 
shooting.
5.Press [SET].
6.Press [BS] (BEST SHOT).
7.Use [8], [2], [4], and [6] to select the “For YouTube” scene and then 
press [SET].
This causes   to appear on the monitor screen.
8.Record the movie.
The movie file will be stored in a camera folder named “100YOUTB”.
• Installing YouTube Uploader for CASIO simplifies uploading of movie files you 
recorded with the “For YouTube” scene to YouTube (page 144).
• To stop “For YouTube” recording and return to snapshot shooting, select a 
different BEST SHOT scene (page 64), or change the recording mode to R 
(Auto) or Ÿ (Premium Auto) (page 28).
NOTE
• Movies recorded with the “For YouTube” scene are stored in a special folder to 
make them easy to locate for uploading (page 153). “For YouTube” movies are 
shot using the image size, recording speed, and quality settings configured in the 
Movie mode (page 55).
• Snapshots cannot be shot (regardless of whether you are recording or not) while 
the “For YouTube” scene is selected.
• A single movie can have a maximum file size of 2,048MB or a playback time of 
15 minutes. The actual maximum recording time depends on the movie mode used 
for recording (page 190).
Recording a Movie for YouTube (For YouTube) 
						

							63Recording Movies
You can shoot snapshots while movie recording is in progress. When the camera is in 
the Single Shot mode, you can shoot snapshots one-by-one. In the CS mode, holding 
down the shutter button will record up to seven consecutive images at a speed of 
approximately 10 images per second (fps). You can shoot a maximum total of 
28 images during a single movie recording operation.
NOTE
• You can shoot up to 28 snapshots per movie. The number of snapshots is also 
limited by the amount of free space available on the memory card.
• Note that the flash cannot be used when shooting a Snapshot in Movie.
• Note that shooting a snapshot while shooting a movie is supported during FHD 
movie and STD movie recording only. It is not supported during other types of 
movie recording.
• Snapshots shot with Snapshot in Movie cannot be focused individually. The focus 
will be the same as the movie being recorded.
• The field of view of a snapshot shot while FHD movie recording is in progress will 
be wider than the field of view of the FHD movie.
• When shooting a snapshot during movie recording, the snapshot image quality 
automatically changes to “Normal”.
• The t (Auto) recording mode is used when you shoot a snapshot during movie 
recording.
Shooting a Snapshot while Shooting a Movie
1.While a movie is being recorded, press the 
shutter button.
• In the CS mode, images continue to be shot as long 
as you keep the shutter button depressed.
• Movie recording is not interrupted while snapshots 
are being shot.
• While movie recording is in progress, you can toggle 
between the Single Shot mode and the CS mode by 
pressing [4], [6], or [SET]. Note that this method 
for mode switching is possible only during movie 
recording. The CS mode is indicated when   is 
red (on the monitor screen), and the Single Shot 
mode is selected when t is red.
Number of recordable
snapshots 
						

							
64Using BEST SHOT
Using BEST SHOT
BEST SHOT provides you with a collection of sample “scenes” that show a variety of 
different types of shooting conditions. When you need to change the setup of the 
camera, simply find the scene that matches  what you are trying to achieve, and the 
camera sets up for it automatically. This  helps to minimize the chance of ruined 
images due to poor exposure and shutter speed settings.
1.In the REC mode, press [BS] 
(BEST SHOT).
This will display a menu of BEST 
SHOT scenes.
2.Use [ 8], [ 2], [ 4], and [ 6] to 
move the boundary to the scene 
you want to select.
• The scene menu has multiple 
pages. Use [8] and [2] to scroll 
between menu pages.
• To return to normal snapshot  recording, press [AUTO].
What is BEST SHOT?
Some Sample Scenes
Portrait Scenery High Speed 
Night Scene High Speed 
Night Scene and 
Portrait
To shoot an image with BEST SHOT
Currently selected scene 
(with boundary)
Scene number
Scene name[SET]
[
8 ] [2 ] [4 ] [6 ] [BS] (BEST SHOT) 
						

							65Using BEST SHOT
3.Press [SET] to configure the camera with the settings for the currently 
selected scene.
This returns to the REC mode.
• The settings of the scene you selected remain in effect until you select a 
different scene.
• To select a different BEST SHOT scene, repeat the above procedure from 
step 1.
4.Press the shutter button (if you are shooting a snapshot) or [0] (Movie) 
(if you are shooting a movie).
.Using the Scene Information Screen
To find out more about a scene, select it with the boundary 
on the scene menu and then slide the zoom controller in 
either direction.
• To return to the scene menu, slide the zoom controller 
again.
• To scroll between scenes, use [4] and [6].
• To configure the camera with the settings for the currently 
selected scene, press [SET]. 
						

							66Using BEST SHOT
.BEST SHOT Precautions
• Sample images shown on BEST SHOT scene screens were not shot with this 
camera. There are provided to illustrate the effects and merits of each scene.
• Images shot using a BEST SHOT scene may not produce the results you expected 
due to shooting conditions and other factors.
• You can modify the camera settings that are configured after you select a BEST 
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults 
when you select another BEST SHOT scene or turn off the camera.
• Snapshot shooting is disabled while the following BEST SHOT scenes are being 
used.
Prerecord (Movie), For YouTube, BEST SHOT movie scenes
• Movie recording is disabled while the following BEST SHOT scenes are being 
used.
HDR, HDR Art, Multi SR Zoom, Slide Panorama, High Speed Best Selection, 
Lag Correction, High Speed Anti Shake, Blurred Background, Wide Shot
• FHD movie and STD movie recording are disabled (and high speed movie is 
always enabled) while the following BEST SHOT scenes are being used. 
Child High Speed Movie, Pet High Speed Movie, Sports High Speed Movie
• The “3:2” and “16:9” image size settings are not supported by BEST SHOT scenes 
that use High Speed CS. Selecting “3:2” and “16:9” in another mode and then 
selecting a BEST SHOT scene that uses High Speed CS will cause the image size 
setting to change to “16M”.
• When the movie mode is FHD/STD, movies are recorded using the settings of the 
selected BEST SHOT scene. For high speed movie recording, BEST SHOT scene 
settings are ignored and movie recording is performed as it normally is.
• BEST SHOT scenes that use High Speed CS ignore the “Zoom (SR)” setting.
• With the BEST SHOT scenes below, certain shooting conditions can cause the 
image area to become narrower than normal.
HDR, HDR Art, High Speed Night Scene and Portrait 
						

							67Using BEST SHOT
You can save up to 999 camera setups as user BEST SHOT scenes for instant recall 
whenever you need them.
1.Select the “BEST SHOT (Register User Scene)” BEST SHOT scene.
2.Use [4] and [6] to select the snapshot whose setup you want to save.
3.Use [8] and [2] to select “Save”, and then press [SET].
Your BEST SHOT scene will be assigned the name “Recall User Scene”, along 
with a scene number.
NOTE
• You can create BEST SHOT setup for snapshots only. You cannot create a movie 
BEST SHOT setup.
• You can check the settings of the currently selected BEST SHOT scene by 
displaying the camera’s setting menus and looking at its settings.
• User snapshot scenes are assigned numbers in the sequence: U1, U2, and so on.
• The following are the settings that are saved for each user snapshot BEST SHOT 
scene.
Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Lighting, 
Flash Intensity, Color Filter, Sharpness, Saturation, Contrast
• User BEST SHOT scenes are stored in built-in memory (page 153) in the SCENE 
folder (snapshots).
• Formatting the camera’s built-in memory (page 164) deletes all user BEST SHOT 
scenes.
• Use the following procedure when you want to delete a user BEST SHOT scene.
1Display the information screen (page 65) of the user BEST SHOT scene you 
want to delete.
2Press [2] ( ), select “Delete”, and then press [SET].
Creating Your Own BEST SHOT Setups 
						

							
68Using BEST SHOT
This function analyzes a burst of consecutive images and then blurs the background 
behind the main subject. This creates an e ffect that really makes the subject stand 
out, just like photographs taken with a single-lens reflex camera.
1.In the REC mode, press [BS] (BEST SHOT).
2.Select “Blurred  Background” and then press [SET].
3.Press the shutter bu tton to shoot.
• Get as close as possible  to the subject. Also, the background should be as far 
away as possible from the subjec t. The required distances depend on the 
zoom factor being used.
• This will cause the message “Busy...  Please wait...” to appear. Do not move 
the camera while this message is displayed. The recording process takes 
some time to complete after the message appears.
NOTE
• The current “Zoom (SR)” (page 49) setting is ignored when shooting with this  function.
• With this BEST SHOT scene, the fl ash setting automatically becomes ? (Flash 
Off).
• The desired background blur effect may not be attained if the camera or subject  moves during shooting.
• Depending on the shooting environment, im age composition, and subject, this 
BEST SHOT scene may not be able to produce the desired result.
• If the camera determines that it is unable to blur the background of an image for  some reason, it will display the message  “Blur processing failed.”. Note, however, 
that the image will be saved, even  if background blurring is not possible.
Shooting with a Blurred Background (Blurred Background)
Shot with “Auto”. Shot with “Blurred Background”.
Example : When zoom is set to full wide  (W), the distance between the camera 
and subject should be 30 to 50cm (1.0 to 1.6), while the distance 
between the subject and background s hould be at least 1 meter (3.3). 
						

							69Using BEST SHOT
With this feature, a number of images are shot and then combined to produce an 
image with a super-wide angle of view that exceeds the widest angle of view possible 
with the lens. Converted to 35 mm equivalents, the focal distances available with this 
feature enable shooting with approximate angles of view of 17 mm and 21 mm.
1.In the REC mode, press [BS] (BEST SHOT).
2.Select “Wide Shot” and then press [SET].
3.Press [SET] and then use [8] and [2] to select the width setting, which 
is the fifth Control Panel setting from the top.
4.Use [4] and [6] to select the width setting (angle of view) you want and 
then press [SET].
There are two settings available: “Wide 1 (21 mm)” and “Wide 2 (17 mm)”. 
“17 mm” shoots a wider area than “21 mm”.
5.Hold the camera so it is 
upright, with the shutter 
button and other 
controls at the bottom.
• Do not point the camera 
straight down at the 
ground at this time. If you 
do, the camera’s built-in 
vertical/horizontal position 
sensor will not operate 
properly and may make it 
impossible to start 
shooting.
Shooting with a Super Wide Angle of View (Wide Shot)
28 mm (lens widest angle) Wide 1 (21 mm) Wide 2 (17 mm)
Shutter button Control button 
						

							70Using BEST SHOT
6.Point the camera at the 
subject you want in the 
center of the image and 
then half-press the 
shutter button to focus.
• The outer blue boundary 
on the screen indicates the 
recordable range of the 
image.
7.Press the shutter button the rest of the way 
down and slowly move the camera in 
accordance with the instructions and arrow 
that appear on the monitor screen.
• Holding the camera firmly with both hands, follow 
the instructions that appear on the monitor screen 
to slowly slide the camera horizontally or vertically 
in an arc centered on your body.
– When sliding the camera horizontally, do not 
allow your body to move left or right. A vertical 
line running through your body should serve as 
the axis.
– When sliding the camera vertically, do not allow your body to move upwards 
or downwards. A horizontal line between your shoulders should serve as the 
axis.
– Take care not to slide the camera diagonally and be sure to maintain a firm 
grip on it.
• The camera will start composing the super-wide image internally when the 
slide cursor reached the other end of the movement range.
• Image composing also will start automatically if you stop moving the camera 
during super-wide shooting. After you stop moving the camera, the message 
“Busy... Please wait...” appears as the camera processes the image. Wait until 
this message disappears before using the camera. Image shooting is disabled 
while the message is displayed.
NOTE
• The “17 mm” and “21 mm” angle of view values are approximate and are provided 
for reference only. Actual angle of view values are not guaranteed.
• Zoom operations are not supported during Wide Shot shooting. The zoom setting 
is fixed at full wide angle.
• This function makes it possible to shoot images with a maximum angle of view of 
17 mm or 21 mm. Note, however, that shooting conditions can result in a smaller 
angle of view.
Desired image
Center part at the start of
the shooting operationBlue boundary
Arrow
Instructions