Casio EX FC200S User Manual

							101Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 32 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [SET] to start playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/fast 
reverse[4] [6] (Playback in progress.)
• Each press of either button increases the speed of the 
fast forward or fast reverse operation.
• To return to normal playback speed, press [2].
Play/pause[SET]
1 frame forward/
back[4] [6] (Playback paused.)
• Holding down either button scrolls continuously.
Volume adjustmentPress [2] and then press [8] [2]
• Volume can be adjusted only while movie playback is in 
progress.
Information display 
on/off[8] (DISP)
Change to normal 
playback speed 
during high speed 
movie playback[AUTO]
• Press [AUTO] again to return to the slow playback 
speed. This operation is not supported when playing a 
movie shot with “HS30-120” or “HS30-240”.
ZoomSlide the zoom controller in the direction of z ([).
• You can use [8], [2], [4], and [6] to scroll the zoomed 
image on the monitor screen. You can zoom a movie 
image up to 4.5 times normal size.
Stop playback[MENU]
Movie icon: »
Image quality Recording time 
						

							102Viewing Snapshots and Movies
1.Press [p] (PLAY), and then use [4] and [6] to 
display the panorama images you want to 
view.
2.Press [SET] to start playback of the panorama.
Panorama playback causes the image to scroll left, 
right, up, or down.
Playback Controls
• The following functions cannot be performed on a panorama image.
Dynamic Photo, Movie Converter, MOTION PRINT, Movie Editing, Trimming, 
Resize, Lighting, White Balance, Brightness, Rotation
Viewing a Panorama Image
To start or pause 
playback[SET]
To advance scroll 
while paused[4] [6] (When the slide direction is left or right.)
[8] [2] (When the slide direction is up or down.)
• Holding down any button scrolls continuously.
To hide or show 
display information[8] (DISP)
To stop playback[MENU] 
						

							103Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) operation, the camera creates a CS 
group that includes all of the images for that particular CS session. You can use the 
following procedure to play back the images in a particular CS group.
1.Press [p] (PLAY) and then use [4] and [6] to display the CS group 
whose images you want to view.
2.About one second after you select a CS group, high speed playback of 
its images will start automatically.
• After playback of a CS Group is complete, the first image of the group will be 
displayed on the monitor screen.
• Pressing [SET] will pause playback. While playback is paused, you can adjust 
the playback speed, specify the playback direction, scroll forward or back, 
zoom images, and delete images.
Viewing Continuous Shutter Images
Number of image files in
the CS group
First image in the CS groupCS group icon
Current image number/number 
of images in the group
CS speed
Playback guide 
						

							104Viewing Snapshots and Movies
The following are operations that are supported after you press [SET] to 
start image playback.
You can use the following procedures to delete images while playback is in progress 
or paused.
.Deleting a Specific CS Group File
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [4] and [6] to display the image you want to delete.
4.Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 3 and 4.
• To exit the delete operation, press [MENU].
[4] [6]During playback, changes the playback direction and playback speed.
While playback is paused, scrolls forward or back.
• Playback speed cannot be adjusted while the displayed image is 
zoomed.
[SET]Toggles between pause and play.
Zoom 
controllerZooms the image.
• You can use [8], [2], [4], and [6] to scroll the zoomed image on 
the monitor screen.
• Sliding the zoom controller towards w (]) while an image is not 
zoomed will display a menu of images in the current CS group.
[MENU]Exits CS group playback.
[8] (DISP)Cycles through information display formats.
[2]Displays the “CS Frame Edit” menu.
Deleting Continuous Shutter Images 
						

							105Viewing Snapshots and Movies
.Deleting Multiple Files in a CS Group
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [8] and [2] to select “Delete Frames” and then press [SET].
• This displays a file selection screen.
4.Use [8], [2], [4], and [6] to move the selection boundary to the file 
you want to delete, and then press [SET].
• This will select the check box of the currently selected file.
• You can enlarge the selected image before deleting it by sliding the zoom 
controller towards z ([).
5.Repeat step 4 to select other files, if you want. After you are finished 
selecting files, press [MENU].
6.Use [8] and [2] to select “Yes” and then press [SET].
• This deletes the files you selected.
• To cancel the delete operation, select “No” in step 6 and then press [SET].
.Deleting All Files in a CS Group
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [8] and [2] to select “Del Group Images” and then press [SET].
4.Use [8] and [2] to select “Yes”, and then press [SET]. 
						

							106Viewing Snapshots and Movies
Use the following to divide up a CS Group into individual images.
.Dividing Up a Specific CS Group
1.While a CS group is displayed or while the images of a CS group are 
scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select the “PLAY” tab.
3.Use [8] and [2] to select “Divide Group” and then press [6].
4.Use [4] and [6] to display the CS group you want to divide up.
5.Use [8] and [2] to select “Divide” and then press [SET].
• To divide up other CS group files, repeat steps 4 and 5.
.Dividing Up All CS Groups
IMPORTANT!
• Once a CS group is divided, it cannot be regrouped.
1.While a CS group is displayed or while the images of a CS group are 
scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select the “PLAY” tab.
3.Use [8] and [2] to select “Divide Group” and then press [6].
4.Use [8] and [2] to select “Divide All Groups” and then press [SET].
5.Use [8] and [2] to select “Yes”, and then press [SET].
Dividing Up a CS Group 
						

							107Viewing Snapshots and Movies
Use the following procedure to copy an image in a CS group to a location outside of 
the group.
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Copy”, and then press [SET].
3.Use [4] and [6] to display the image you want to copy.
4.Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a CS group. Before 
using either of these functions, perform the above procedure to copy the image 
first.
White Balance, Brightness, Trimming, Rotation, Resize
Copying a CS Group Image 
						

							108Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom controller towards z ([) to 
zoom.
You can use [8], [2], [4], and [6] to scroll the zoomed 
image on the monitor screen. Slide the zoom controller 
towards w to unzoom the image.
– When monitor screen contents are turned on, a 
graphic in the lower right corner of the screen 
shows what part of the zoomed image is currently 
displayed.
– To exit the zoom screen, press [MENU].
– Though the maximum image zoom factor is 8X, 
certain image sizes may not allow zooming up to 
the full 8X.
• Pressing [SET] will lock the current zoom factor for the on-screen image. You 
can then use [4] and [6] to scroll between images, using the same zoom 
factor. Pressing [SET] again will unlock the zoom factor and allow you to use 
[8], [2], [4] and [6] to move around the currently displayed images. This 
function cannot be used while viewing CS group images or movies. Also, CS 
group images and movies will not appear when you are scrolling images with 
[4] and [6].
1.In the PLAY mode, slide the zoom controller 
towards w (]).
Use [8], [2], [4] and [6] to move the selection 
boundary around the image menu.
To view a particular image, use [8], [2], [4], or [6] to 
move the selection boundary to the image you want and 
then press [SET].
• In the case of a movie or a continuous shutter (CS) 
file, the first frame of the file will be displayed.
Zooming an On-screen Image
Displaying the Image Menu
Image area
Current display areaZoom factor
Boundary 
						

							109Viewing Snapshots and Movies
1.Use the optionally available AV cable (EMC-8A) to connect the camera 
to the TV.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
• Make sure that the camera is turned off before plugging 
in or unplugging the cable. Check the user 
documentation that comes with the TV for information 
about requirements before plugging into or unplugging 
from the TV.
2.Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is 
connected.
Viewing Snapshots and Movies on a TV Screen
YellowAV cable (EMC-8A)
[USB/AV] port Red
Making sure that the 6 mark on the camera is 
aligned with the 4 mark of the AV cable connector, 
connect the cable to the camera. VIDEO IN jack (yellow)AUDIO IN jack (red)
TV
Terminal cover White
AUDIO IN jack (white)Video Audio 
						

							110Viewing Snapshots and Movies
3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing 
on the camera’s monitor screen.
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the 
AV cable is connected.
• You also can change the aspect ratio of the screen and the video output 
system (page 162).
4.Now you can display images and play back movies as you normally do.
IMPORTANT!
• Before connecting to a TV to display images, be sure to configure the camera’s 
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 161).
• Audio is initially output by the camera at maximum volume. When you first start 
displaying images, set the TV volume control at a relatively low level and then 
adjust it as required.
NOTE
• Audio is stereo.
• Some TVs may not be able to output images and/or audio correctly.
• All icons and indicators that appear on the monitor screen also appear on the TV 
screen. You can use [8] (DISP) to change the display contents.
• Normally connecting the camera to a TV during recording will cause the camera’s 
monitor screen to go blank and display the image picked up by the camera on the 
TV screen. If you are using Wide Shot (page 69), the image will be shown on the 
monitor screen but not the TV screen. Image recording can be performed in either 
case.