Casio EX FC200S User Manual

							141Using the Camera with a Computer
8.On the shortcut menu that appears, click “Copy”.
9.Windows 7 / Windows Vista users: Click “Start” and then 
“Documents”.
Windows XP users: Click “Start” and then “My Documents”
• If you already have a “DCIM” folder in “Documents” (Windows 7 / Windows 
Vista) or “My Documents” (Windows XP), the next step will overwrite it. If you 
want to keep the existing “DCIM” folder, you need to change its name or move 
it to a different location before performing the next step.
10.Windows 7 users: On the “Documents” “Organize” menu, select 
“Paste”.
Windows Vista users: On the “Documents” “Edit” menu, select 
“Paste”.
Windows XP users: On the “My Documents” “Edit” menu, select 
“Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your 
“Documents” (Windows 7 / Windows Vista) or “My Documents” (Windows XP) 
folder. You now have a copy of the files that are in camera memory on your 
computer.
11.After you finish copying images, disconnect the camera from the 
computer. 
						

							142Using the Camera with a Computer
.To view images you copied to your computer
1.Double-click the copied “DCIM” folder to open it.
2.Double-click the folder that contains the images you want to view.
3.Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 153.
• An image that was rotated on the camera will be displayed on your computer 
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will individually display the component 
images in the CS group. A CS group cannot be viewed as a CS image on a 
computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing 
images. Doing so can cause data to become corrupted. Never use your computer to modify, delete, move, or rename any image files 
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which 
will make it impossible to play back images on the camera and can drastically alter 
remaining memory capacity. Whenever you want to modify, delete, move, or 
rename an image, do so only on images that are stored on your computer. 
						

							143Using the Camera with a Computer
To play back a movie, first copy it to your computer and then double-click the movie 
file. Some operating systems may not be able to play back movies. If this happens, 
you need to install separately available software.
• With Windows 7, playback is supported by Windows Media Player 12.
• If you are unable to play back movies, go to the URL below to download 
QuickTime 7 and install it on your computer.
http://www.apple.com/quicktime/
.Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back 
movies recorded with this camera on a computer.
• The above are recommended system environments. Configuring one of these 
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of 
movies.
.Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to 
play it. Proper movie playback may not be possible for data accessed over a 
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience 
problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Quit any other applications you have running, and stop resident applications.
Even if proper playback is not possible on the computer, you can use the AV cable 
(option) to connect to the video input terminal of a TV or computer and play back 
movies that way.
Playing Movies
Operating System : Windows 7, Windows Vista, Windows XP (SP3)
CPU : Image Quality “FHD”:
Core 2 Duo 3.0GHz or higher
Image Quality “STD” or “HS”:
Pentium 4 3.2GHz or higher
Required Software : QuickTime 7 (Not required with Windows 7.) 
						

							144Using the Camera with a Computer
To make it easy to upload to YouTube a movie file recorded with the “For YouTube” 
BEST SHOT scene, install YouTube Uploader for CASIO on your computer.
.What is YouTube?
YouTube is a movie sharing site managed by YouTube, LLC where you can upload 
movies and view movies uploaded by others.
.To install YouTube Uploader for CASIO
Download the YouTube Uploader for CASIO installer from the CASIO digital camera 
support page (http://www.casio-intl.com/support/). Double-click the installer and 
follow the installation instructions that appear on your computer screen.
• For information about installation conditions and minimum computer system 
requirements, see page 176.
.To upload a movie file to YouTube
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube 
website (http://www.youtube.com/) and register as a user there.
• Do not upload any video that is copyrighted (including neighboring copyrights) 
unless you yourself own the copyright or you have obtained the permission of the 
applicable copyright holder(s).
• The maximum file size for each upload is 2048MB or 15 minutes of playing time.
1.Record the movie you want to upload using the “For YouTube” scene 
(page 62).
2.If it isn’t already, connect your computer to the Internet.
3.Connect the camera to your computer (page 139).
4.Turn on the camera.
YouTube Uploader for CASIO will start up automatically.
• If this is the first time you are using the application, configure the YouTube user 
ID and network environment settings, and then click the [OK] button.
5.The left side of the display will have an area for inputting a title, 
category, and other information required for uploading to YouTube. 
Enter the required information.
6.The right side of the display shows a list of movie files in camera 
memory. Select the check box next to the movie file you want to 
upload.
7.When everything is ready, click the [Upload] button.
This will upload the movie file(s) to YouTube.
• After uploading is complete, click the [Exit] button to exit the application.
Uploading Movie Files to YouTube 
						

							145Using the Camera with a Computer
If you want to transfer images from your computer to the camera, install Photo 
Transport on your computer.
.To install Photo Transport
Download the Photo Transport installer from the CASIO digital camera support page 
(http://www.casio-intl.com/support/). Double-click the installer and follow the 
installation instructions that appear on your computer screen.
• For information about installation conditions and minimum computer system 
requirements, see page 176.
.To transfer images to the camera
1.Connect the camera to your computer (page 139).
2.On your computer, click the following: Start * All Programs * 
CASIO * Photo Transport.
This starts up Photo Transport.
3.Drag the file(s) you want to transfer to the [Transfer] button.
4.Follow the instructions that appear on the display to complete the 
transfer.
• The details of the instructions that appear on the display and the transferred 
images will depend on your Photo Transport setup. For details, click the 
[Settings] button or [Help] button and check the setup.
Transfer Data
• Only image files with the following extensions can be transferred to the camera:
jpg, jpeg, jpe, bmp (bmp images are converted to jpeg images automatically when 
transferred.)
• Certain types of images may not be able to be transferred.
• You cannot transfer movies to the camera.
Transferring Images from Your Computer to Camera Memory 
						

							146Using the Camera with a Computer
.To transfer computer screen captures to the camera
1.Connect the camera to your computer (page 139).
2.On your computer, click the following: Start * All Programs * 
CASIO * Photo Transport.
This starts up Photo Transport.
3.Display the screen whose screen capture you want to transfer.
4.Click the [Capture] button.
5.Draw a boundary around the area you want to capture.
Move your mouse pointer to the upper left corner of the area you want to capture 
and then hold down the mouse button. Keeping the mouse button depressed, 
drag the pointer down to the lower right corner of the area and then release the 
mouse button.
6.Follow the instructions that appear on the display.
This will send an image of the area you selected to the camera.
• The transfer operation converts screen captures to JPEG format.
• The instructions that appear on the display and details about the transferred 
images will depend on your Photo Transport setup. For details, click the 
[Settings] button or [Help] button and check the setup.
.About settings and help
Click the [Settings] button when you want to change the Photo Transport setup. For 
help about operation procedures and troubleshooting, click the Photo Transport 
[Help] button. 
						

							147Using the Camera with a Computer
You can copy moving subjects (animated characters) from your computer to the 
EXILIM. You also can convert Dynamic Photo images to movies and send them to a 
mobile phone for playback. To perform such functions, you need to install Dynamic 
Photo Manager on your computer.
To download Dynamic Photo Manager and find out more details about it, visit the 
URL below.
http://www.exilim.com/dp/en_intl/
Internet registration only is supported. Visit the following CASIO website to register: 
http://world.casio.com/qv/register/
Install the required software in accordance with what version of the Macintosh OS 
you are running and what you want to do.
Play back Dynamic Photo images on your EXILIM, a computer, 
or on a mobile phone
User Registration
Using the Camera with a Macintosh
When you want to 
do this:Operating 
System VersionInstall this software:See 
page:
Save images to your 
Macintosh and view 
them there manuallyOS X Installation not required. 148
Save images to your 
Macintosh 
automatically/
Manage imagesOS XUse iPhoto, which comes 
bundled with some Macintosh 
products.151
Play movies OS XMovie file playback is supported 
under OS X 10.4.11 or higher 
when QuickTime 7 or higher is 
installed.151 
						

							148Using the Camera with a Computer
IMPORTANT!
• The camera does not support operation with Mac OS X 10.0. Operation is 
supported with Mac OS 10.1, 10.2, 10.3, 10.4, 10.5, and 10.6 (using the OS 
standard USB driver) only.
.To connect the camera to your computer and save files
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “Mass Storage”, and then press [SET].
4.Turn off the camera and then use the USB cable that comes with the 
camera to connect it to your Macintosh.
The camera will turn on automatically and battery charging will start (page 19).
• The camera may not turn on automatically in the case of certain computer 
models or connection conditions. If this happens, press [ON/OFF] (Power) to 
turn on the camera.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
Connecting the Camera to Your Computer and Saving Files
USB port
Making sure that the 6 mark on the camera is aligned 
with the 4 mark of the USB cable connector, connect 
the cable to the camera.[USB/AV] port Large connector
Small connector
Terminal
coverUSB cable (included with camera) 
						

							149Using the Camera with a Computer
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
• When connecting the USB cable to a USB port, make 
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera 
if you connect via a USB hub. Always connect directly to 
the computer’s USB port.
• The first time you connect the camera to your computer with the USB cable, an 
error message may appear on your computer. If this happens, disconnect and 
then reconnect the USB cable.
5.Double-click the camera’s drive icon.
The camera’s back lamp will light green at this time. In this mode, your Macintosh 
recognizes the memory card loaded in the camera (or the camera’s built-in 
memory if it does not have a memory card loaded) as a drive. The appearance of 
the drive icon depends on the Mac OS version you are using.
6.Drag the “DCIM” folder to the folder to which you want to copy it.
7.After the copy operation is complete, drag the drive icon to Trash.
8.Disconnect the camera from the computer. 
						

							150Using the Camera with a Computer
.To view copied images
1.Double-click the camera’s drive icon.
2.Double-click the “DCIM” folder to open it.
3.Double-click the folder that contains the images you want to view.
4.Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 153.
• An image that was rotated on the camera will be displayed on your Macintosh 
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will individually display the component 
images in the CS group. A CS group cannot be viewed as a CS image on a 
computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing 
images. Doing so can cause data to become corrupted. Never use your computer to modify, delete, move, or rename any image files 
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which 
will make it impossible to play back images on the camera and can drastically alter 
remaining memory capacity. Whenever you want to modify, delete, move, or 
rename an image, do so only on images that are stored on your computer.