Casio EX FC200S User Manual

							11
.Movie Recording
.Snapshot Viewing
1Recording mode (page 55)
2Audio recording disabled (page 58)
3Remaining movie memory capacity (page 55)
4Movie recording time (page 55)
5Movie recording in progress (page 55)
6Movie quality (FHD/STD movie) (pages 55, 58)/
Recording speed (high speed movie) (page 58)
7Battery level indicator (page 21)
1File type
2Protect indicator (page 120)
3Snapshot image size (page 38)
4Folder name/file name (page 152)
5Snapshot image quality (page 98)
6ISO sensitivity (page 41)
7Aperture value
8Shutter speed
9Date/time (page 159)
bkExposure compensation (page 43)
blMetering mode (page 99)
bmWhite balance setting (page 118)
bnFlash (page 44)
boBattery level indicator (page 21)
bpContinuous Shutter mode (page 50)
bqHistogram (page 179)
brRecording mode (page 28)
4 3 1
2
6
5
7
2413
5
6
7
8
bm bn bobk bl
bq
bp br
9 
						

							12
.Movie Playback
.CS Image Viewing
Each press of [8] (DISP) will cycle through display settings that 
display or hide on-screen information and the control panel. You 
can configure separate settings for the REC mode and PLAY 
mode.
• The control panel is not displayed and display information settings cannot be 
changed during movie recording.
1No audio data available
2File type
3Protect indicator (page 120)
4Folder name/file name (page 152)
5Movie recording time (page 101)
6Movie quality/speed (pages 55, 58, 58)
7YouTube (page 62)
8Date/time (page 159)
9Battery level indicator (page 21)
1Current image number/number of images in the 
group (page 103)
2CS group icon (page 103)
3Playback guide (page 103)
4CS speed (page 103)
Turning Display Information On and Off (Info)
Information on, 
control panel onDisplays setting information and the control panel.
Information on, 
control panel on, 
histogram onDisplays setting information and the 
control panel, and a histogram (page 179) 
on the left side of the display. Also 
displays the remaining movie recording 
time as well as a movie image quality 
icon.
Information off, 
control panel offHides setting information and the control panel.
134
5
6
7
892
12
4
3
[8] (DISP)
Histogram 
						

							13Quick Start Basics
Quick Start Basics
What is a digital camera?
A digital camera stores images on a memory card, so you can record and 
delete them a countless number of times.
Play
You can use the images you record in a variety of different ways.
Store images on your 
computer.Print images. Attach images to e-mail.
DeleteRecord 
						

							14Quick Start Basics
Your CASIO camera is packed with a powerful selection of features and functions to 
make recording of digital images easier, including the following six main functions.
What you can do with your CASIO camera
Blurred Background
This function analyzes a burst of consecutive images 
and then blurs the background behind the main 
subject. This creates an effect that really makes the 
subject stand out, just like photographs taken with a 
single-lens reflex camera.
Wide Shot
With this feature, a number of images are shot and 
then combined to produce an image with a super-wide 
angle of view that exceeds the widest angle of view 
possible with the lens. Converted to 35 mm 
equivalents, the focal distances available with this 
feature enable shooting with approximate angles of 
view of 17 mm and 21 mm.
HDR Art / HDR Art Movie
An HDR Art feature combines different parts of a burst 
of images shot with different exposures into a final 
image and performs high-precision image analysis to 
produce final images that are true works of art. HDR 
Art also can be used when shooting movies.
Premium Auto
Select Premium Auto recording and the 
camera automatically determines whether you 
are shooting a subject or scenery, and other 
conditions. Premium Auto delivers higher 
image quality than standard Auto.
*See page 68 for more information.
*See page 69 for more information.
*See page 74 for more information.
*See page 28 for more information. 
						

							15Quick Start Basics
High Speed Movie
Movies can be recorded at up to 1000 frames per 
second. This makes it possible to clearly view 
phenomena that are invisible to the human eye, in 
slow motion.
FHD Movie Recording
You can record movies in high-quality FHD.
(1920x1080 pixels 30 fps)
*See page 58 for more information.
1920x1080 pixels*See page 58 for more information. 
						

							16Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps 
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-110) 
for power. Never try to use any other type of battery.
1.Open the battery cover.
Slide the battery cover slider towards OPEN 
and then open it as indicated by the arrows in 
the illustration.
2.Load the battery.
With the EXILIM logo on the 
battery facing upwards (in the 
direction of the monitor screen), 
hold the stopper next to the 
battery in the direction indicated 
by the arrow as you slide the 
battery into the camera. Press the 
battery in until the stopper 
secures it in place.
3.Close the battery cover.
Close the battery cover and then shift the 
slider towards LOCK.
• For information about how to replace the 
battery, see page 173.
First, charge the battery prior to use.
To load the battery
EXILIM logo Stopper
FrontBack Battery contacts 
						

							17Quick Start Basics
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
.To charge with the USB-AC adaptor
1.Turn off the camera.
Check to make sure that the camera’s monitor 
screen is blank. If it isn’t, press [ON/OFF] (Power) to 
turn off the camera.
2.After connecting the 
supplied USB cable 
to the USB-AC 
adaptor, plug the 
power cord into a 
household power 
outlet.
Charge the Battery
[ON/OFF] (Power)
USB
USB-AC adaptorPower cord USB cable (included with camera)
USB port 
						

							18Quick Start Basics
3.Connect the USB 
cable to the camera.
The back lamp should 
light red, indicating that 
charging has started.
The back lamp will go out 
when charging is 
complete.
It takes about 
190 minutes to bring a 
fully dead battery to a full 
charge.
• A battery that has not 
been used for a long 
time, or ambient 
temperature extremes 
can cause charging to 
take longer than 
normal. If charging 
takes longer than 
about six hours, a timer will terminate it automatically, even if the battery is not 
fully charged. This is indicated by the back lamp flashing red. If the battery has 
not been used for a very long time, charging may be terminated automatically 
and the back lamp may start flashing red after only about 45 minutes. In either 
case, disconnect the USB cable from the camera and then reconnect it to 
resume charging.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
Back Lamp Op eration
Lamp StatusDescription
Lit Red Charging
Flashing RedAbnormal ambient temperature, USB-
AC adaptor problem, battery problem, 
or charging terminated by timer (page 
172)
Off Charging complete
USB cable 
(included with camera)
Making sure that the 6 mark on the camera is aligned 
with the 4 mark of the USB cable connector, connect 
the cable to the camera.[USB/AV] port
Small connector USB-AC adaptor Terminal cover
Back lamp 
						

							19Quick Start Basics
4.After charging is complete, disconnect the USB cable from the camera 
and then unplug the power cord from the power outlet.
.To charge using a USB connection to a computer
The battery loaded in the camera is charged whenever the camera is connected 
directly to a computer with the USB cable.
• Depending on the setup of your computer, you may not be able to charge the 
camera’s battery over a USB connection. If this happens, use of the USB-AC 
adaptor that comes with the camera is recommended.
IMPORTANT!
• The first time you connect the camera to your computer with the USB cable, an 
error message may appear on your computer. If this happens, disconnect and then 
reconnect the USB cable.
1.Press [ON/OFF] (Power) to turn off the camera.
2.With your computer turned on, connect the camera to it.
The camera’s back lamp will light red. After a short while, the camera will turn on 
automatically and the back lamp will light amber to indicate that charging has 
started. The back lamp will light green when charging is complete. Note, 
however, that some computer models or connection conditions can produce low 
supply capacity. If low supply capacity exists, charging will start without the 
camera turning on. This is indicated by the back lamp lighting red. The back lamp 
will go out in this case after charging is complete.
USB port
USB cable (included with camera)
Making sure that the 6 mark on the camera is aligned 
with the 4 mark of the USB cable connector, connect 
the cable to the camera.[USB/AV] port Large connector
Small connector
Terminal
cover 
						

							20Quick Start Basics
• A battery that has not been used for a long time, certain types of computers, 
and connection conditions can cause charging to take more than 
approximately six hours, which will trigger a timer that terminates charging 
automatically, even if the battery is not fully charged. If this happens, 
disconnect and then reconnect the USB cable to restart charging. To complete 
charging faster, use of the included USB-AC adaptor is recommended.
• If the battery has not been used for a very long time, charging may terminate 
automatically and the back lamp may start flashing red or go out after only 
about 30 minutes to 45 minutes. In either case, use of the USB-AC adaptor that 
comes with the camera is recommended.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
Back Lamp Operation
3.After charging is complete, disconnect the USB cable from the camera 
and then from the computer.
NOTE
• Charging continues while a camera is connected to a computer’s USB port, even if 
the camera is turned off. Under this condition, the back lamp operates as described 
under “Back Lamp Operation” (page 18).
Lamp StatusDescription
Lit Amber Charging
Lit RedCharging in progress (Data transfer with 
computer not supported.)
Flashing Red/OffAbnormal ambient temperature, battery 
problem, or charging terminated by 
timer (page 172)
Lit Green Charging complete, or charging stoppedBack lamp