Casio EX FC200S User Manual

							131Printing
.To print
1.Turn on the printer and load paper.
2.Turn on the camera.
This will display the print menu screen.
3.Use [8] and [2] to select “Paper Size”, and then press [6].
4.Use [8] and [2] to select a paper size and then press [SET].
• The following are the available paper sizes.
3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer
• Selecting “By Printer” prints using a paper size selected on the printer.
• See the documentation that comes with your printer for information about 
paper settings.
5.Use [8] and [2] to specify the print option you want.
• To toggle date stamping on and off, press [0] (Movie). The date stamp will be 
printed when “On” is indicated on the monitor screen.
6.Use [8] and [2] to select “Print” and then press [SET].
Printing will start and the message “Busy... Please wait...” will appear on the 
monitor screen. The message will disappear after a short while, even though 
printing is still being performed. Pressing any camera button will cause the 
printing status to re-appear. The print menu screen will re-appear when printing is 
complete.
• If you selected “1 Image”, you can repeat the procedure from step 5, if you 
want.
7.After printing is complete, turn off the camera and disconnect the USB 
cable from the printer and camera.
1 Image : Prints one image. Select and then press [SET]. Next, use [4] and 
[6] to select the image you want to print.
DPOF Printing : Prints multiple images. Select and then press [SET]. With this 
option, images will be printed in accordance with DPOF settings 
(page 132). 
						

							132Printing
.Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy, 
and time stamp on/off information on the memory card with the images. 
After configuring settings, you can use the memory card to print on a home 
printer that supports DPOF or take the memory card to a professional print 
service.
• Whether or not you will be able to use DPOF settings for printing depends on the 
printer you are using.
• Some professional print services may not support DPOF.
.Configuring DPOF Settings Individually for Each Image
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
DPOF Printing * Select images
1.Use [4] and [6] to scroll through the files until the image you want to 
print is displayed.
2.Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is 
shown for date stamping.
• Repeat steps 1 and 2 to configure settings for other images, if you want.
3.Press [SET].
Using DPOF to Specify Images to be Printed and the Number 
of Copies 
						

							133Printing
.Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
DPOF Printing * All images
1.Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• Note that the specified number of copies will be printed for all of the images in 
any CS group included with the images.
• If you want to include the date in the images, press [0] (Movie) so “On” is 
shown for date stamping.
2.Press [SET].
NOTE
• You can specify the number of copies for a specific image (page 133) or for all of 
the images in a CS group (page 134) by performing the above procedure while an 
image in the group is displayed.
.To specify the number of copies for a specific image in a CS group
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “DPOF Printing” and then press [SET].
3.Use [8] and [2] to select “Select images” and then press [SET].
4.Use [4] and [6] to scroll through images until one you want to print is 
displayed.
5.Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is 
shown for date stamping.
• Repeat steps 4 and 5 to configure settings for other images, if you want.
6.Press [SET]. 
						

							134Printing
.To configure the same DPOF settings for all the images in a CS 
group
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “DPOF Printing” and then press [SET].
3.Use [8] and [2] to select “Frame all” and then press [SET].
4.Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is 
shown for date stamping.
5.Press [SET]. 
						

							135Printing
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF 
settings you configured for the images. To clear DPOF settings, specify “00” for the 
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it 
includes DPOF settings for the images to be printed and the number of copies. If you 
don’t, the print service may print all the images without regard to your DPOF settings, 
or they may ignore your date stamp setting.
.Date Stamping
You can use one of the following three methods to include the recording date in the 
printout of an image.
Configuring camera settings
Configure DPOF settings (page 132).
You can turn date stamping on and off each time you print. You can configure 
settings so some images include the date stamp and some don’t.
Configure the Camera’s Timestamp setting (page 158).
• The camera’s Timestamp setting imprints the date into a snapshot when you 
shoot it, so the date is always included when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that includes a date 
stamped with the camera’s Timestamp function. Doing so can cause the two 
stamps to be overprinted.
Configuring computer settings
You can use commercially available image management software to date 
stamp images.
Professional print service
Request date stamping when ordering prints from a professional print service. 
						

							136Printing
.Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association 
(CIPA). You can connect the camera directly to a printer that supports 
PictBridge, and perform image selection and printing using the 
camera monitor screen and controls.
• PRINT Image Matching III
Using image editing software and printing on a printer that supports 
PRINT Image Matching III makes it possible to use information about 
shooting conditions that is recorded with the image, and produce 
exactly the type of image you want. PRINT Image Matching and 
PRINT Image Matching III are trademarks of Seiko Epson Corporation.
•Exif Print
Printing on a printer that supports Exif Print uses information about 
shooting conditions recorded with the image to enhance printed 
image quality. Contact your printer manufacturer for information 
about models that support Exif Print, printer upgrades, etc. 
						

							137Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a 
computer.
*Windows only
The procedures you need to perform when using the camera with your computer and 
when using the software are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a 
computer and view 
them thereSave images and view them manually 
(USB connection) (pages 139, 148).
Transfer images 
stored on your 
computer to 
camera memoryIn addition to images, you also can transfer 
screen shot images from your computer to 
the camera (Photo Transport*) (page 145).
Play back and edit 
movies• You can play back movies (pages 143, 
151). To play back movies, use software 
that is compatible with your computer’s 
operating environment.
• To edit movies, use commercially 
available software as required.
Play back and edit 
Dynamic Photo 
images on your 
EXILIM, a 
computer, or on a 
mobile phone• You can copy moving subjects 
(animated characters) from your 
computer to the EXILIM.
• You can convert Dynamic Photo images 
to movies and send them to a mobile 
phone for playback (Requires Dynamic 
Photo Manager.
*) (page 147).
• Windows users should refer to “Using the Camera with a Windows Computer” 
on page 138.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page 
147. 
						

							138Using the Camera with a Computer
Install the required software in accordance with the version of Windows you are 
running and what you want to do.
*YouTube Uploader for CASIO, Photo Transport, and Dynamic Photo Manager will not 
run under 64-bit versions of Windows OS.
Using the Camera with a Windows Computer
When you want to 
do this:Operating System 
VersionInstall this software:See 
page:
Save images to a 
computer and view 
them there manuallyWindows 7, 
Windows Vista, 
Windows XPInstallation not required. 139
Play moviesWindows 7Installation not required.
• Windows Media Player 12, 
which is already installed 
on most computers, can 
be used for playback.
143
Windows Vista, 
Windows XPMovies can be played back 
using QuickTime 7.
• You need to download 
QuickTime 7 on the Web if 
you want to use it.
Edit moviesWindows 7, 
Windows Vista, 
Windows XP–
• Use commercial software 
as required.–
Upload movie files to 
YouTubeWindows 7, 
Windows Vista, 
Windows XP (SP3)YouTube Uploader for 
CASIO*
• You need to download it 
from the website.144
Transfer images to 
the cameraWindows 7, 
Windows Vista, 
Windows XPPhoto Transport 1.0*
• You need to download it 
from the website.145
Play back, copy, and 
edit Dynamic Photo 
moving subjects 
(animated 
characters)Windows 7, 
Windows Vista (SP1), 
Windows XP (SP3)Dynamic Photo Manager
*• You need to download it 
from the website.147 
						

							139Using the Camera with a Computer
.Computer System Requirements for Software
Computer system requirements are different for each of the applications. Information 
about computer system requirements can be found under “Computer System 
Requirements for Software (For Windows)” on page 176 of this manual.
.Precautions for Windows Users
• The software requires Administrator privileges to run.
• Operation on a self-made computer is not supported.
• Operation may not be possible under certain computer environments.
You can connect the camera to your computer in order to view and store images 
(snapshot and movie files).
.To connect the camera to your computer and save files
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “Mass Storage”, and then press [SET].
Viewing and Storing Images on a Computer 
						

							140Using the Camera with a Computer
4.Turn off the camera and then use the USB cable that comes with the 
camera to connect it to your computer.
The camera will turn on automatically and battery charging will start (page 19).
• The camera may not turn on automatically in the case of certain computer 
models or connection conditions. If this happens, press [ON/OFF] (Power) to 
turn on the camera.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
• When connecting the USB cable to a USB port, make 
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera 
if you connect via a USB hub. Always connect directly to 
the computer’s USB port.
• The first time you connect the camera to your computer with the USB cable, an 
error message may appear on your computer. If this happens, disconnect and 
then reconnect the USB cable.
5.Windows 7 / Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
6.Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in 
memory if there is no card) as a removable disk.
7.Right-click the “DCIM” folder.
USB port
USB cable (included with camera)
Making sure that the 6 mark on the camera is aligned 
with the 4 mark of the USB cable connector, connect 
the cable to the camera.[USB/AV] port Large connector
Small connector
Terminal
cover