Canon recording software RM25 V10 User Manual

3-3
Storage Server Settings
3
Note
If the [User Account Control] dialog box appears, click [Yes] (or 
[Continue]).
➀[Host Name]
Enter the host name or the IP address of the Storage 
Server Group. If the Viewer and the Storage Server are 
installed on the same computer, enter “localhost”.
➁[Port]
Normally, leave [80] unchanged.
➂[User Name], [Password]
Enter your user name and password.
The default user name and password are:
User Name: administrator
Password: NVR
➃[Remember user name]
Select the check...

3-4
„Specify the Storage Server Group for Starting 
the Viewer
You can start the Viewer using a Storage Server Group 
name instead of the host name of the server.
Note
If the [User Account Control] dialog box appears, click [Yes] (or 
[Continue]).
➀[User Name] and [Password]
Enter the use name and password.
The default user name and password are:
User Name: administrator
Password: NVR
➁[Remember user name]
Select the check box if you want the software to 
remember the user name.
➂[Use Host Name]
Click to...

3-5
Storage Server Settings
3You can change the name of the Storage Server Group 
and configure the free disk space notifications.
Display the [Storage Server Group Settings] 
Dialog Box
The [Storage Server Group Settings] dialog box is 
displayed.
➀[Edit]
Change the name of Storage Server Group.
➁[Recording Settings] tab
Configure the free disk space notifications.
Note
For RM-Lite, the items in the [Recording Settings] tab have the 
following limitations.
 The [Mirroring Settings] feature is not...

3-6
You can specify the storage period of the recorded 
images and the maximum disk usage.
Display the [Servers] Tab
The [Servers] tab is displayed in the [Settings] dialog 
box.
➀List of Storage Servers
Display a list of Storage Servers.
➁[Add], [Edit], and [Remove]
Edit a Storage Server. [Add] or [Remove] are not 
available with RM-Lite.
➂[Recorded Video Settings]
Specify the minimum and maximum storage period for 
recorded images.
➃[Close]
Close the dialog box.
„Specify the Storage Period for Recorded...

Configure a Storage Server
3-7
Storage Server Settings
3
5Click [OK] to close the dialog box.
Important
We recommend that you do not specify the system drive 
(typically the C drive) as the destination for the recording file. 

3-8
You can add a camera to be used for displaying images 
or recording to a Storage Server.
Note
You can add up to four cameras.
Display the [Cameras] Tab
Display the [Cameras] tab in the [Settings] dialog box to 
start adding a camera.
➀List of cameras
Displays a list of already added cameras.
➁[Find]
Search for cameras on the network.
➂[Add], [Edit], and [Remove]
Add, edit or remove a camera.
➃[Close]
Closes the dialog box.
Add Cameras One at a Time
Add cameras one at a time to the list of cameras on...

Add a Camera
3-9
Storage Server Settings
3
Search For and Add Cameras
You can search for cameras that are on the same network 
as the Storage Server.
The cameras on the subnet are displayed in the 
[Camera Search Results] dialog box.
You can add more than one camera by selecting 
multiple check boxes.
The [Add Camera] dialog boxes for the cameras 
selected in step 2 are displayed in the order of the 
[Camera Search Results] list (from top to bottom).
Note
 You can only search for cameras on the same...

3-10
Edit Camera Information
You can edit the camera registration information, such as 
the camera name or the thumbnail image displayed in the 
Viewer.
[General] tab
➀Camera name box
Enter a camera name.
➁[Update]
Update the thumbnail image in the camera selection 
panel.
➂[Tags]
This cannot be used with RM-Lite.
➃[Edit]
This cannot be used with RM-Lite.
➄[Remove]
This cannot be used with RM-Lite.
➅[OK] and [Cancel]
Close the dialog box.
➆[Apply]
Apply the settings in the dialog box.
Note
The camera...

Add a Camera
3-11
Storage Server Settings
3
„Change the Thumbnail Image of a Camera
You can change the thumbnail image of a camera.
In the [ Properties] dialog box, click the 
[General] tab and click [Update] to display the 
[Thumbnail] dialog box.
➀Preview image
Drag the slider to change the zoom position of the 
camera. Click in the preview image to change the 
camera position. 
➁[Select Preset]
Select a preset image stored on the camera.
➂[Update]
Use the current preview image as the camera 
thumbnail...

3-12
You can add users to the Viewer and place them in the 
administrator group or the general user group.
About User Groups
The Viewer provides the following two user groups, each 
with different user permissions.
 Administrator
Users in this group can fully operate the Viewer.

Users in this group have limited access to the features 
of the Viewer. They cannot configure a camera or set a 
recording schedule.
You can specify the group to which the added user 
belongs by selecting from [User Group]....