Canon recording software RM25 V10 User Manual

System Design
1-9
Introduction
1
„Storage Server Operation Considerations
We recommended that you dedicate the Storage Server computer exclusively to running this software.
Be sure to avoid the following on the Storage Server computer:
 Running Web server software on the computer
You cannot operate the Storage Server on a computer where Web server software such as Windows standard IIS 
(Internet Information Server) or Apache is already installed.
The Storage Server uses HTTP protocol to communicate with...

1-10 

Chapter 2
Setup
❏How to install the software
❏Settings after installation 

2-2
Before Installation
Use an NTFS Formatted Drive
The drive you install the software on and the drive for 
saving recorded images must be NTFS format.
Set Up the Cameras
You must set up any cameras that you will use with this 
software before starting operation. For details, refer to the 
camera manual.
Stop Other Applications
Stop other applications that are running on the computer, 
such as anti-virus software, before installing the software.
Install .NET Framework SP1
.NET Framework 3.5 SP1 or later...

Installation
2-3
Setup
2Click the application that you do not want to install and 
select [This feature will not be available].
Note
 When installing on a PC that has multiple network interfaces, 
select the network interface to use in the [Network adapter] list 
and the assigned IP address in the [IP address] list.
 If you clear the [Add storage server programs to the Windows 
Firewall exception list.] check box, you need to configure 
Windows Firewall after the installation is complete. For details,...

2-4
Configure the following setting after installing this software 
according to the operating system you are using:
(3: Required, 
—: Not required)
Windows Firewall Settings
The changes to the settings are already complete if you 
selected the [Add storage server programs to the 
Windows Firewall exception list] check box during 
installation. If you did not select the above check box 
during installation, perform the following procedure to 
change the Windows Firewall settings.
The following settings...

Settings After Installation
2-5
Setup
2
Security Level Setting
In Internet Explorer, the default security level setting for 
Internet or intranet sites in Windows Server 2008 and 2008 
R2 is “High”. Therefore, you are not able to configure 
settings in the configuration or top page of the camera. 
Follow these steps to register the site as a trusted site.
Note
 For details on registration with trusted sites, click [Learn more 
about Internet Explorer’s Enhanced Security Configuration] in 
the [Internet...

2-6 

Chapter 3
Storage Server Settings
❏Adding cameras
❏Configuring the Storage Server Group
❏Adding users 

3-2
Flow of Storage Server Settings
Start the Viewer (P. 3-3)
Configure a Storage Server Group
Display the [Storage Server Group Settings] dialog box (P. 3-5)
Change the Storage Server Group name (P. 3-5)
Configure a Storage Server
Display the [Servers] tab (P. 3-6)
Specify the storage period for recorded images (P. 3-6)
Change the destination of the recording file and the maximum disk usage (P. 3-6)
Add a camera
Display the [Cameras] tab (P. 3-8)
Add cameras one at a time (P. 3-8)Search for and add...