Home > Canon > Projector > Canon Projector WUX4000 User Manual

Canon Projector WUX4000 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Projector WUX4000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11
    Safety Instructions
    Safety Instructions
    Safety Precautions
    WARNING:
    • THIS APPARATUS MUST BE GROUNDED.
    • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
    APPLIANCE TO RAIN OR MOISTURE.
     This projector produces intense light from the projection lens. Do not stare directly into  the lens, otherwise eye damage could result.  Be especially careful that children do not 
    stare directly into the beam.
     Install the projector in a proper position. Otherwise it may result in a fire hazard.
     Allowing the proper amount of space on the top,  sides, and rear of the projector cabinet 
    is critical for proper air circulation and cooling of the unit. The diagrams shown here 
    indicates the minimum space required. If the pr ojector is to be built into a compartment 
    or similarly enclosed, these minimum distances must be maintained.
     Do not cover the ventilation slots on the pr ojector. Heat build-up can reduce the service 
    life of your projector, and  can also be dangerous.
     If the projector is unused for an extended time, unplug the projector from the power out-
    let.
     Do not project the same image for a long time. 
    An afterimage may remain on the LCD panels  due to the characteristics of the panels of 
    the projector.
    CAUTION ON HANGING FROM THE CEILING
    When hanging the projector from the ceiling, clean the air intake vents and top of the pro-
    jector periodically with a vacuum cleaner. If you leave the projector unclean for a long 
    time, the cooling fans can be clogged with dust, and it may cause a breakdown or a 
    disaster.
    DO NOT SET THE PROJECTOR IN GREASY,  WET, OR SMOKY CONDITIONS SUCH 
    AS IN A KITCHEN TO PREVENT A BREAKDOW N OR A DISASTER. IF THE PROJEC-
    TOR COMES IN CONTACT WITH OIL OR  CHEMICALS, IT MAY BECOME DETERIO-
    RATED.
    SIDE and TOP REAR
    50 cm (1.6) 50 cm (1.6)
    50 cm (1.6)
    50 cm (1.6) 
    						
    							Safety Instructions
    12
    ■READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE.
    All the safety and operating instructions shou ld be read before beginning to operate the 
    product.
    Read all of the instructions given here and reta in them for later use. Unplug this projector 
    from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the 
    projector. Use a damp cloth for cleaning.
    Follow all warnings and instructions marked on the projector.
     
    For added protection of the projector during  a lightning storm, or when it is left unat-
    tended or unused for long periods of time, unplug it from the wall outlet. This will prevent 
    damage due to lightning and power surges.
    Do not expose this unit to rain or use near water... for example, in a wet basement, near a 
    swimming pool, etc...
    Do not use attachments not recommended by the manufacturer as they may result in haz-
    ards.
    Do not place this projector on an unstable  cart, stand, or table. The projector may fall, 
    causing serious injury to a child or adult,  and serious damage to the projector. Use only 
    with a cart or stand recommende d by the manufacturer, or sold with the projector. Wall or 
    shelf mounting should be carried out in acco rdance with the manufacturer’s directions, 
    and should use a mounting kit ap proved by the manufacturers.
    An appliance and cart combination should be moved with care.
    Sudden stops, excessive force, and uneven surfaces may cause the 
    appliance and cart combination to overturn.
    Slots and openings in the rear and fr ont of the cabinet are provided for 
    ventilation, to insure reliable operation of the equipment and to protect 
    it from overheating.
    The openings should never be covered with  cloth or other materials, and the bottom 
    opening should not be blocked by placing the  projector on a bed, sofa, rug, or other sim-
    ilar surface. This projector should never be placed near or over a radiator or heat register.
    This projector should not be placed in a built -in installation such as a book case unless 
    proper ventilation is provided. 
    						
    							13
    Safety Instructions
    Safety Instructions
    Never push objects of any kind into this projector through cabinet slots as they may touch 
    dangerous voltage points or short out parts that could result in a fire or electric shock. 
    Never spill liquid of any kind onto the projector.
    Do not install the projector near the ventil ation duct of air-conditioning equipment.
    This projector should be operated using only  the type of power source indicated on the 
    marking label. If you are not sure of the  type of power supplied, contact the Canon Cus-
    tomer Support Center or local power company.
    Do not overload wall outlets and extension cords  as this can result in fire or electric shock. 
    Do not allow anything to rest on the power cord. Do not locate this projector where the 
    cord may be damaged by  people walking on it.
    Do not attempt to service this projector y ourself as opening or removing covers may 
    expose you to dangerous voltages or other  hazards. Refer all servicing to qualified ser-
    vice personnel.
    Unplug this projector from the wall outlet and refer servicing to qualified service person-
    nel under the following conditions:
    a. When the power cord or plug is damaged or frayed.
    b. If liquid has been spilled into the projector.
    c. If the projector has been exposed to rain or water.
    d. If the projector does not operate normally  after following the operating instructions. 
    Adjust only those controls that are covered  in the operating instructions as improper 
    adjustment of other co ntrols may result in damage and will often require extensive work 
    by a qualified technician to restore the  projector to normal operating condition.
    e. If the projector has been droppe d or the cabinet has been damaged.
    f.  When the projector exhibits a distinct c hange in performance-this indicates a need for 
    servicing.
    When replacement parts are required, be sure the service technician uses replacement 
    parts specified by the manufacturer that hav e the same characteristics as the original 
    parts. Unauthorized substitutions may result in fire, electric shock, or injury.
    Upon completion of any service or repairs to  this projector, ask the service technician to 
    perform routine safety checks to determine that the projector is in safe operating condi-
    tion. 
    						
    							Safety Instructions
    14
    AC Power Cord Requirement
    The AC Power Cord supplied with this projector meets the requirements for use in the 
    country you purchased it.
    THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EAS-
    ILY ACCESSIBLE.
    AC Power Cord for the United States and Canada:
    The AC Power Cord used in the United States and Canada is 
    listed by the Underwriters Labora tories (UL) and certified by the 
    Canadian Standard Association (CSA).
    The AC Power Cord has a grounding-type AC line plug.  This is 
    a safety feature to ensure the plug  fits into the power outlet.  Do 
    not try to tamper with this safety  feature.  Should you be unable 
    to insert the plug into the outlet, contact your electrician.
    NOTE FOR CUSTOMERS IN THE US LAMP(S) INSIDE THIS PRODUCT CONTAI N MERCURY AND MUST BE RECYCLED 
    OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
    European Union (and EEA) only.
    These symbols indicate that this product  is not to be disposed of with 
    your household waste, according to  the WEEE Directive (2002/96/EC), 
    the Battery Directive (2006/66/EC) and / or your national laws imple-
    menting those Directives. If a chem ical symbol is printed beneath the 
    symbol shown above, in accordance with the Battery Directive, this 
    indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = 
    Lead) is present in this battery or accumulator at a concentration above 
    an applicable threshold specified in the Battery Directive. This product 
    should be handed over to a designat ed collection point, e.g., on an 
    authorized one-for-one basis when yo u buy a new similar product or to 
    an authorized collection site for recycling waste electrical and elec-
    tronic equipment (EEE)  and batteries and accumulators. Improper han-
    dling of this type of waste could  have a possible impact on the 
    environment and human health due  to potentially hazardous sub-
    stances that are generally  associated with EEE. Your cooperation in the 
    correct disposal of this product will contribute to the effective usage of 
    natural resources. For more information about the recycling of this 
    product, please contact your local city office, waste authority, approved 
    scheme or your household waste disposal service or visit 
    www.canon-europe.com/environment
    .
    (EEA: Norway, Iceland and Liechtenstein)
    Ground 
    						
    							15
    Safety Instructions
    Safety Instructions
    Federal Communication Commission Notice
    Multimedia Projector, Model: WUX5000 / WUX4000
    This device complies with Part 15 of the FCC Rules.  Operation is subject to the follow-
    ing two conditions:
    (1) This device may not cause harmful interference, and
    (2) this device must accept any interference received, including interference that may cause undesired operation.
    Note: This equipment has been tested and foun d to comply with the limits for a Class B 
    digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
    vide reasonable protection against harmful interference in a residential installation.  This 
    equipment generates, uses and can radiate radi o frequency energy and, if not installed 
    and used in accordance with  the instructions, may cause harmful interference to radio 
    communications.  However, there is no guarantee that interference will not occur in a 
    particular installation.  If this equipment do es cause harmful interference to radio or tele-
    vision reception, which can be determined  by turning the equipment off and on, the 
    user is encouraged to try to correct the interference by one or more of the following 
    measures:
    • Reorient or relocate the receiving antenna. 
     Increase the separation between the equipment and receiver. 
     Connect the equipment into an outlet on a circuit different from that to which the  receiver is connected.
     Consult the dealer or an experienced  radio / TV technician for help.
    The cable with a ferrite core provided with t he projector must be used with this equip-
    ment in order to comply with Class B limits  in Subpart B of Part 15 of the FCC rules.
    Use of a shielded cable is required to compl y with class B limits in Subpart B of Part 15 
    of FCC Rules.
    Do not make any changes or modifications to the equipment unless otherwise specified 
    in the instructions.  If s uch changes or modifications should be made, you could be 
    required to stop operation of the equipment.
    Canon U.S.A. Inc. 
    One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. 
    Tel No. (516) 328-5600
    Canadian Radio Interference Regulations
    This Class B digital apparatus complies with Canadian ICES-003. 
    						
    							Safety Instructions
    16
    Precautions for Use
    As this section contains important safety-related information, be sure to read the following
    carefully beforehand in order to use your projector correctly and safely.
    If the following situations occur, turn the power off, remove the power plug from the 
    power outlet and contact the Canon Customer Support Center. Failure to do so could 
    cause a fire or result in an electric shock. 
    • If smoke is emitted
     If an unusual smell or noise is emitted
     If a loud noise is heard and the lamp turns off
     If water or other liquid has entered the projector
     If metal or any other foreign material has entered the projector
     If the projector is knocked over or dropped and the cabinet is damaged
    Pay attention to the following points for  handling the power cord. Failing to pay atten-
    tion to these points could cause a fire, electric shock or personal injury. 
     Do not place any objects on the power cord  and do not allow it to become trapped 
    under the projector. The  power cord may be damaged.
     Do not cover the power cord with a carpet.
     Do not excessively bend, twist, pull or make modifications to the power cord.
     Keep the power cord away from heaters and other sources of heat.
     Do not use the power cord when it  is bent finely, coiled or bundled.
     Do not use a damaged power cord. If your power cord is damaged, contact the  Canon Customer Support Center.
     Do not use any power cord other than the type that is included with this projector.
     Be sure to connect the ground wire of the power cord to ground. Failure to do so  could result in an electric shock.
     Be sure to connect the ground wire before connecting the power plug to the outlet. 
    Also when you disconnect the ground wire, be sure to unplug the power plug from 
    the outlet beforehand.
    Warning
    Warning 
    						
    							17
    Safety Instructions
    Safety Instructions
    Precautions for Installation
    Pay attention to the following points regarding the power source, power plug and han-
    dling of the connector. Failure to do so could result in a fire, electric shock or personal 
    injury. 
     Do not use any power source with a voltage  other than the voltage indicated (AC 100 
    – 240 V).
     Do not pull the power cord and be sure to hold the power plug or connector when  removing. The cord could be damaged as a result.
     Do not insert any metal objects into the contact parts of the power plug or connector.
     Remove the power plug from the outlet be fore performing cleaning or maintenance 
    of the projector.
     Do not remove the power plug or connector with wet hands.
     Insert the power plug and connector securel y up to the base. Additionally, do not 
    use a damaged power plug or an outlet that is loose.
     If using an extension cord atta ched to the outlet, make sure that the total electric 
    power consumption of connected devices  does not exceed the rated capacity.
     Periodically inspect the power plug and outlet and remove any dust or dirt from 
    between the plug and the outlet.
    Pay attention to the following points regarding  installation and handling of the projector. 
    Failure to do so may cause a fire, electric shock or personal injury.
     Do not use the projector in a bathroom or shower room.
     Do not use the projector in rain or snow, by  the sea, or in close proximity to a body of 
    water.
     Do not place containers containing a liquid on top of the projector.
     Do not place the projector in any location where it will be exposed to oily smoke or  steam, such as a kitchen work surface or table etc.
     Do not touch the projector itself, the power cord, or the cable if lightening strikes.
    Warning
    Warning 
    						
    							Safety Instructions
    18
    Pay attention to the following points regarding installation and handling of the projector. 
    Failure to do so may cause a fire, electric shock or personal injury.
    • Do not move the projector until you have  switched off the power, removed the power 
    plug from the power outlet and  unplugged any other cables.
     Before installing or replacing a lens unit, make sure to remove the power plug from  the outlet. Failure to do so could result in an electric shock or injury.
     Do not remove the cabinet from the projecto r or disassemble it. The interior of the 
    projector contains high-voltage components  as well as parts that are hot. These 
    could cause an electric shock or burn. If inspection, maintenance or repair is 
    required, contact the Canon Customer Support Center.
     Do not disassemble or modify the projector  (including consumable parts) or the 
    remote control.
     Do not insert any object into vents in the  projector, such as the air intake vent or 
    exhaust vents.
     Do not place a pressurized can in front of the exhaust vents. The pressure of the  contents of the can may increase due to he at from the exhaust vents and this could 
    result in an explosion.
     As strong light beams are emitted while the pr ojector is in use, do not look directly 
    into the projector lens. Doing so could cause an eye injury. Pay particular attention in 
    preventing young children to do so.
     When giving a presentation in front of the pr ojector while it is projecting an image, 
    conduct your presentation from a position  where your shadow will not be cast on the 
    screen and where you do not feel blinded by light from the projector.
    Pay attention to the following points rega rding installation and handling of the projec-
    tor.
     If the projector will not be used for a long period of time, be sure to remove the 
    power plug from the power outlet to ensure safety. Failure to do so could cause a 
    fire. 
    
    The temperature of the cabinet around and above the exhaust vents can become hot 
    during projector operation. 
    Touching these areas during operation could cause 
    burns to the hands.
    Do not touch these areas. Doing so may cause burns. Pay particular attention in pre-
    venting young children from touching thes e parts. Additionally, do not place any 
    metal objects on these areas. Due to the heat from the projector, doing so could 
    cause an accident or personal injury.
    Warning
    Caution 
    						
    							19
    Safety Instructions
    Safety Instructions
    Precautions on the lamp
    Pay attention to the following points regarding installation and handling of the projector.
    • Do not place any heavy objects on top of the  projector or sit / stand on it. Pay partic-
    ular attention to prevent small children fr om doing so. The projector may be knocked 
    over and this could result in damage or a personal injury. 
     Do not place the projector on an unstable or slanted surface. Doing so may cause  the projector to fall or be knocked over an d could result in a personal injury.   
     Do not place any objects in front of the lens while the projector is operating. Doing so 
    could cause a fire. 
     When cleaning off dust or dirt from the projector lens etc., do not use any kind of  spray that is flammable. As th e temperature of the lamp insi de the projector is high, it 
    could ignite, causing a fire.
     Using the lens shift function the lens in the projector moves up /  down / left / right 
    powered by a motor. Do not touch the lens when the lens is moving. Doing so could 
    cause a personal injury. 
     Before replacing the lens unit, wait at least one hour after the projector is turned off  to allow the projector to cool thoroughly. Failure to do so could result in a burn or 
    injury.
     If the projector is used for a long period of time, dust could accumulate inside the  projector. This could cause a fire or malf unction. It is recommended that periodic 
    maintenance of the projector be performed. For details of maintenance costs, con-
    tact the Canon Customer Support Center.
     When hanging the projector from a ceiling,  put the projector down on the floor or a 
    workbench before attaching or replacing the lens unit. Failure to do so could result in 
    parts falling off the projector and may cause an accident or personal injury.
    When replacing the lamp, or when the lamp is damaged, pay attention to the following 
    points. Failure to do so could result in an electric shock or personal injury. 
     Be sure to remove the power plug from th e power outlet before replacing the lamp.
     When the lamp is damaged, shards of glass may be scattered inside the projector. 
    Contact the Canon Customer Support Center  for cleaning and inspection of the pro-
    jector interior and lamp replacement.
    Caution
    Warning 
    						
    							Safety Instructions
    20
    Precautions for the batteries of the remote control
    When handling the lamp, pay attention to the following points.
     Be sure not to handle the lamp immediately  after it has been used. Be sure to switch 
    off the power and wait for approximately 1 ho ur for the lamp and the projector to cool 
    down sufficiently. Failure to do so could result in a burn or personal injury due to heat 
    from the lamp or projector.
     When an instruction to replace the lamp  has been displayed (LAMP Indicator Dis-
    plays ( P33)), the possibility of the lamp breaki ng will increase. Replace the lamp with 
    a new one as soon as possible.
     If the lamp is damaged, ga s inside the lamp (containing mercury) and dust may be 
    emitted from the exhaust vents. If this happens, immediately open the windows and 
    doors to provide ventilation to the room. If you inhale any gas emitted from the lamp 
    or it has come into contact with your eyes or mouth, consult a doctor immediately.
     When disposing of a used mercury lamp, dispose of it in the same way as a fluores-
    cent lamp and in accordance with the local regulations where you live.
    Pay attention to the following points regard ing handling of batteries. Failure to do so 
    could result in a fire or injury.
     Do not place the batteries in a fire or apply heat to, short circuit or disassemble the  batteries.
     Do not attempt to recharge the batteries.
     Remove the batteries when they have been full y used, or if they will not be used for a 
    long period of time.
     When replacing the batteries, replace both at the same time. Also, do not use two  batteries of a different type at the same time.
     Insert the batteries in the correct + / - positions.
     If any liquid leaks from the  batteries and comes into cont act with skin, wash off thor-
    oughly with water.
    Caution
    Warning 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Projector WUX4000 User Manual