Canon Projector WUX4000 User Manual

							101
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Selecting a Display Language
[Language]
You can select the language in which the 
menus are displayed.
Use the [ ], [ ], [ ] / [ ] buttons to 
select the menu language, then press the 
OK button.
When the setting is completed, press the 
MENU button.
Showing / Hiding the 
Guide Screen
[Guide]
You can select whether to show or hide the 
guide screen which explains operations.
Press the  OK button to accept your setting 
and then press the  MENU button.
• [On] is the factory default.
 The guide screen is shown at the following 
times.
- Power is turned off by pressing the
POWER  button. ( P66)
- No input signal can be detected. (P46 )
- An invalid button is pressed in the
[BLANK], [FREEZE] or [D.ZOOM]
mode. ( P68, P70 )
HDMIComponent
Digital PCAnalog PC
English
German
French
Italian
Spanish
Portuguese
Swedish
Russian
Dutch
Finnish
Norwegian
Turkish
Polish
Hungarian
Czech
Danish
Arabic
Chinese (Simplified)
Chinese (Traditional)
Korean
Japanese
Language System settings
HDMIComponent
Digital PCAnalog PC
Off Hides the guide screen.
On Shows the guide screen.
Guide System settings 
						

							Setting Various Functions
102
Showing / Hiding the 
Input Status
[Show Input Status]
Select whether or not to show the input 
signal status on the screen when there is 
no signal or a signal has been set.
Press the OK button to accept your setting 
and then press the  MENU button.
 [On] is the factory default.
Selecting the HDMI Input
[HDMI In]
Set the type of equipment which is con-
nected to the HDMI port.
Press the OK button to accept your setting 
and then press the  MENU button.
HDMIComponent
Digital PCAnalog PC
Off The input status is not displayed.
On The input status is displayed.
Show Input Status System settings
HDMIComponent
Digital PCAnalog PC
Auto Select when AV equipment will 
be connected. Image pro-
cessing, menu displays, and 
other elements are adjusted 
for video equipment.
Computer Select when a  computer will be 
connected. Image processing, 
menu displays, and other ele-
ments are adjusted for a  com-
pute r.
System settings
HDMI In 
						

							103
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Setting a Password
[Other settings] - [Password settings]
Disables the projector unless the correct 
password is entered.
Press the OK button to accept your setting 
and then press the  MENU button.
• [Off] is the factory default.
 You cannot set [On] unless you have com-
pleted [Register password].
Once you set a password, the password 
entry screen appears at power-on.
Enter a 4-digit password consisting of a 
combination of the [ ], [ ], [ ] / [ ] but-
tons.
If the password is valid, the projection 
starts. If you enter a wrong password three 
times, the power will be turned off.
 The power is also turned off if no password is input for 3 minutes.
HDMIComponent
Digital PCAnalog PC
Off
The projector can be used even if no pass-
word is entered.
OnThe projector cannot be used unless you 
enter your password.
Other settings System settings
Password settings
To Cancel the Password
Turn off the projector and unplug the power 
plug. 
Hold down the 
MENU button on the side control 
and connect the power plug. Make sure to keep 
holding down the 
MENU button until a beep 
sounds. When the beep sounds, the password 
is canceled. (The entered password is also 
reset.)
To forcibly cancel the password from the remote 
control, in standby state press the 
MENU button 
3 times, then press the POWER button. 
						

							Setting Various Functions
104
Registering a Password
[Other settings] - [Register password]
You can register a password for starting 
projection.
Press the OK button after selecting [Reg-
ister password], and the following screen 
for registering a password appears.
Enter a 4-digit password consisting of a com-
bination of the 
[], [], [] / [] buttons. 
(Examples: 
[] [] [] [], [] [] [] [], 
[] [] [] [])
The 4-digit password is entered from the 
left to right digits. When the final digit is 
entered, the password is automatically 
registered.
 Press the  MENU button to abort the regis-
tration.
Prohibiting Operation of 
the Lens
[Other settings] - [Lens Ctrl Lock]
You can lock lens-related button opera-
tions.
Press the  OK button to accept your setting 
and then press the  MENU button.
 [Off] is the factory default.
HDMIComponent
Digital PCAnalog PC
System settings
Other settings
Register password
HDMIComponent
Digital PCAnalog PC
Off Focus, zoom, lens shift, and other 
lens-related operations are permit-
ted.
On Focus, zoom, lens shift, and other 
lens-related operations are locked.
Other settings System settings
Lens Ctrl Lock 
						

							105
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lens Shift Reset
[Other settings] - [Lens shift Reset]
Resets the lens shift ( P60) setting to the 
standard position.
Select [Lens shift Reset] and press the  OK 
button. The following screen for confirma-
tion appears.
Use the [ ]
 / [ ] buttons to select the 
standard position, and then select  OK.
• The standard position varies depending 
on the type of lens unit used. For details, 
refer to “Resetting the Position”. ( P61)
 The position which was adjusted by lens  shift does not change when the power is 
turned off.
Extending the Menu Dis-
play Time
[Other settings] - [Menu display time]
You can extend the menu display time from 
the normal setting of 30 seconds to 3 minutes.
Press the  OK button to accept your setting 
and then press the  MENU button.
 [Normal] is the factory default.
 The following display and operation are 
also changed.
HDMIComponent
Digital PCAnalog PC
Other settings System settings
Lens shift Reset
HDMIComponent
Digital PCAnalog PC
Normal The menu is displayed for 30 seconds.
Extended The menu is displayed for 3 minutes.
Item [Normal] [Extended]The display time of the following 
screens
-Input (P49)
-Zoom adjustment ( P58)
-Focus adjustment ( P59)
-Keystone adjustment ( P62)
-Keystone reset (P63 )
-D.image shift adjustment ( P54, P55 )
-D.image shift reset ( P55)
-Aspect ( P57)
-Image mode ( P64)
-Volume adjustment ( P69)
-Lamp mode ( P97)
-Lens shift ( P60)
-Lens shift reset ( P105)
4 to 10 
seconds 3 minutes
Press-and-hold operation of 
pointer buttons other than for 
[Zoom adjustment], [Focus 
adjustment], and [Lens shift]
Press-and-hold operation of VOL buttonPress-and-hold operation of the 
D.ZOOM button Enabled Disabled
Other settings
System settings
Menu display time 
						

							Setting Various Functions
106
Showing / Hiding the High 
Temperature Warning Icon
[Other settings] - [Overheat Warning Display]
You can select whether or not to display 
the [High temperature warning] icon when 
the temperature inside the projector has 
increased and is approaching the overheat 
temperature.
Press the OK button to accept your setting 
and then press the  MENU button.
When [On] is set, the [High temperature 
warning] icon shown below will be dis-
played when the temperature inside the 
projector is abnormally high.
 [Off] is the factory default.
Reducing Flickering
[Other settings] - [Deflicker]
This function adjusts the image display in 
order to reduce flicke ring in the projected 
image.
HDMIComponent
Digital PCAnalog PC
Off The [High temperature warning] icon is 
not displayed.
On The [High temperature warning] icon is 
displayed.
Other settings System settings
Overheat Warning Display
Screen
HDMIComponent
Digital PCAnalog PC
 Deflicker can only be used when the  lamp has been on for approximately 
30 minutes or longer.
 Be aware that deflicker may be  unable to eliminate flickering in some 
cases. 
Off Deflicker adjustment is not per-
formed.
Adjust Select [Deflicker] to adjust. The fol-
lowing screen appears.
OK Deflicker is performed.
Cancel Deflicker is not performed.
Other settings System settings
Deflicker 
						

							107
Setting Various Functions
User’s ManualSettin
g Functions from Menus
• When deflicker is performed, the image 
adjustment screen is projected for approx-
imately 20 seconds.
 To cancel deflicker, press the POWER  but-
ton.Resetting the Lamp 
Counter
[Other settings] - [Lamp counter]
You can reset the lamp counter that indi-
cates the time for lamp replacement.
Select [Lamp counter] and press the  OK 
button to display the lamp counter.
Select [Reset] and press the  OK button.
HDMIComponent
Digital PCAnalog PC
Do not reset the lamp counter except
when you have replaced the lamp.
Otherwise, the lamp counter cannot
indicate the correct timing for replac-
ing the lamp.
For details of lamp replacement, refer
to page  161.
Other settings System settings
Lamp counter 
						

							Setting Various Functions
108
Select [OK] on the screen for confirmation 
and press the OK button to reset the lamp 
counter.
Press the  MENU button.
■ About the Display of the Lamp 
Counter
The lamp counter displays the hours of 
use of the lamp in the following way.
Less than 2,700 hours
Displayed as a  green bar.
2,700 hours to less than 3,000 hours
Displayed as a  green and yellow  bar.
When the lamp hours are 2,700 hours to 
less than 3,000 hours, the message 
“Obtain a new lamp.” appears when 
power is turned on. Over 3,000 hours
Displayed as a 
green, yellow and red  
bar.
The message “Replace with the new 
lamp.” appears when power is turned on. 
						

							109
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Resetting to the Default Setting
[Other settings] - [Factory defaults]
You can reset the menu item settings and 
restore the system settings to the factory 
defaults.
Select [Factory defaults] and press the  OK 
button. The following screen for confirma-
tion appears.
Press the  OK button to accept your setting 
and then press the  MENU button.
• This function does not reset the values for 
[Lamp counter], [Language], [Remote con-
trol], [Input signal], [Network Setting], [Filter 
counter], [Focus positi on], [Zoom position], 
and [Lens shift position].
 For factory defaults settings, refer to pages 
185 –  187.
 The contents of the user memory return to the 
conditions at the time it was saved. ( P89)
HDMIComponent
Digital PCAnalog PC
OK Settings are reset to default.
Cancel Settings are not reset to default.
Other settings System settings
Factory defaults 
						

							110
Checking Projector Information
[Information]
You can check information about the 
signal types of the images projected and other
information.
Information shown
* Not displayed when network functions are [Off].
HDMIComponent
Digital PCAnalog PC
ItemMeaning
Model name WUX5000 or WUX4000
Input signal Details of the input signal currently selected
Information such as the signal type , signal resolution, and frequency 
is displayed.
Firmware Current firmware version
Serial No. Serial number unique to this projector
IP address* IP address of the projector ( P141)
Gateway address* IP address of the gateway device ( P141)
E-mail sender address* Sender e-mail address used  for sending error mails (P148)
E-mail recipient 
address* Displays [Already set] or [Not set] 
to show whether a recipient e-mail 
address has been set for receiving error mails. ( P148)
Projector name* Name which identifies this projector on the network
Location* Location where the projector is installed
System information ID System information. Normally this is not displayed.
Information