Canon projector REALiS SX6000 D Pprojector Ro AV User Manual
Here you can view all the pages of manual Canon projector REALiS SX6000 D Pprojector Ro AV User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
Useful Functions Available During a Presentation User’s Manual Safety Instructions Before Use Table of Contents Appendix Index Appendix Installation Connecting to a NetworkProjecting an Image Setting Functions from Menus Maintenance Installation Manual 81 Useful Functions Available During a Presentation
Page 82
82 Useful Functions Available During a Presentation Temporarily Blacking Out an Image Press the BLANK button to black out the image. Press the BLANK button again to show the image. You can set the screen state while black- ing out the image in the menu. (P106) The lamp remains illuminated while the image is blacked out. Freezing the Picture Press the FREEZE button to freeze the moving image. The projector shows the following icon. Press the FREEZE button again to cancel the FREEZE function. It...
Page 83
![Page 83
83
Useful Functions Available During a Presentation
User’s ManualUseful Functions Available During a Presentation
Adjusting the Volume
Press the VOL button. The following
screen appears.
You can also adjust the volume level with
the
[] / [] buttons of the projector.
Adjust the volume or mute setting on the
computer if the volume level is too low.
You can also adjust the volume level of the
speakers connected via the audio output
terminal.
Muting the Sound
Press the MUTE button to mute the sound....](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-82.png "Page 83
83
Useful Functions Available During a Presentation
User’s ManualUseful Functions Available During a Presentation
Adjusting the Volume
Press the VOL button. The following
screen appears.
You can also adjust the volume level with
the
[] / [] buttons of the projector.
Adjust the volume or mute setting on the
computer if the volume level is too low.
You can also adjust the volume level of the
speakers connected via the audio output
terminal.
Muting the Sound
Press the MUTE button to mute the sound....")
83 Useful Functions Available During a Presentation User’s ManualUseful Functions Available During a Presentation Adjusting the Volume Press the VOL button. The following screen appears. You can also adjust the volume level with the [] / [] buttons of the projector. Adjust the volume or mute setting on the computer if the volume level is too low. You can also adjust the volume level of the speakers connected via the audio output terminal. Muting the Sound Press the MUTE button to mute the sound....
Page 84
![Page 84
Useful Functions Available During a Presentation
84
Zooming an Image
Press the + D.ZOOM button to enlarge a
part of the image. Press the - D.ZOOM
button to reduce the image size.
The magnification appears on the screen.
You can move the area you want to zoom in
on by using the
[] / [] / [] / [] buttons.
You can restore the original size of the
image by pressing the OK button.
Useful when:
• Zooming in on an object such as a small
graph during a presentation (up to 12x).
• Focusing on the current...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-83.png "Page 84
Useful Functions Available During a Presentation
84
Zooming an Image
Press the + D.ZOOM button to enlarge a
part of the image. Press the - D.ZOOM
button to reduce the image size.
The magnification appears on the screen.
You can move the area you want to zoom in
on by using the
[] / [] / [] / [] buttons.
You can restore the original size of the
image by pressing the OK button.
Useful when:
• Zooming in on an object such as a small
graph during a presentation (up to 12x).
• Focusing on the current...")
Useful Functions Available During a Presentation 84 Zooming an Image Press the + D.ZOOM button to enlarge a part of the image. Press the - D.ZOOM button to reduce the image size. The magnification appears on the screen. You can move the area you want to zoom in on by using the [] / [] / [] / [] buttons. You can restore the original size of the image by pressing the OK button. Useful when: • Zooming in on an object such as a small graph during a presentation (up to 12x). • Focusing on the current...
Page 85
85 Useful Functions Available During a Presentation User’s ManualUseful Functions Available During a Presentation Showing the Elapsed Time Press the P-TIMER button to start counting. The elapsed time is displayed on the lower right corner of the screen. Time is counted up to 59:59. The timer then returns to 00:00. Press the P-TIMER button again to stop the timer. Press the P-TIMER button while the timer is stopped. The timer disappears from the screen. Then press the P-TIMER button to start...
Page 86
86
Page 87
Projecting an Image Safety Instructions Before Use Table of Contents Useful Functions Available During a Presentation Setting Functions from Menus User’s Manual Installation Connecting to a Network Maintenance Appendix Index Appendix Installation Manual 87 Setting Func- tions from Menus
Page 88
![Page 88
88
How to Use Menus
Use the menus to set the operation of the projector in detail.
■Menu Configuration
The menu screen is divided into 5 tabs as shown below.
Input Signal Types for which a Menu Item is Displayed
Different menu items are displayed for different input signal types.
In the following explanation of each menu item, the input signal type for which the
menu item is displayed is indicated as follows:Contents of menu
Menu items
[Display settings] tab
You can set the type of signal
or the method...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-87.png "Page 88
88
How to Use Menus
Use the menus to set the operation of the projector in detail.
■Menu Configuration
The menu screen is divided into 5 tabs as shown below.
Input Signal Types for which a Menu Item is Displayed
Different menu items are displayed for different input signal types.
In the following explanation of each menu item, the input signal type for which the
menu item is displayed is indicated as follows:Contents of menu
Menu items
[Display settings] tab
You can set the type of signal
or the method...")
88 How to Use Menus Use the menus to set the operation of the projector in detail. ■Menu Configuration The menu screen is divided into 5 tabs as shown below. Input Signal Types for which a Menu Item is Displayed Different menu items are displayed for different input signal types. In the following explanation of each menu item, the input signal type for which the menu item is displayed is indicated as follows:Contents of menu Menu items [Display settings] tab You can set the type of signal or the method...
Page 89
![Page 89
How to Use Menus
89
User’s ManualSettin
g Functions from Menus
The menu screen is divided into 6 tabs as shown below.
Contents of menuMenu items
[Input settings] tab
You can set the type of signal or
the method of projection of the
images input.
[Image adjustment] tab
You can adjust the image qual-
ity and colors according to your
preference.
[Network setting] tab
These settings are for when using the
projector from a PC via a network.
For the network settings, refer to page
165.
[Information] tab
You...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-88.png "Page 89
How to Use Menus
89
User’s ManualSettin
g Functions from Menus
The menu screen is divided into 6 tabs as shown below.
Contents of menuMenu items
[Input settings] tab
You can set the type of signal or
the method of projection of the
images input.
[Image adjustment] tab
You can adjust the image qual-
ity and colors according to your
preference.
[Network setting] tab
These settings are for when using the
projector from a PC via a network.
For the network settings, refer to page
165.
[Information] tab
You...")
How to Use Menus 89 User’s ManualSettin g Functions from Menus The menu screen is divided into 6 tabs as shown below. Contents of menuMenu items [Input settings] tab You can set the type of signal or the method of projection of the images input. [Image adjustment] tab You can adjust the image qual- ity and colors according to your preference. [Network setting] tab These settings are for when using the projector from a PC via a network. For the network settings, refer to page 165. [Information] tab You...
Page 90
![Page 90
How to Use Menus
90
■Basic Menu Operations
The menus shown below are for WUX5000.
1Press the [MENU] button to display the menu window.
2Use the [] / [] buttons to select a tab.
If the tab position is not highlighted in orange, use the [ ] / [ ] buttons to move the
highlight to the top.
Remote control
ProjectorRemote control
Remote control
ProjectorRemote control](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-89.png "Page 90
How to Use Menus
90
■Basic Menu Operations
The menus shown below are for WUX5000.
1Press the [MENU] button to display the menu window.
2Use the [] / [] buttons to select a tab.
If the tab position is not highlighted in orange, use the [ ] / [ ] buttons to move the
highlight to the top.
Remote control
ProjectorRemote control
Remote control
ProjectorRemote control")
How to Use Menus 90 ■Basic Menu Operations The menus shown below are for WUX5000. 1Press the [MENU] button to display the menu window. 2Use the [] / [] buttons to select a tab. If the tab position is not highlighted in orange, use the [ ] / [ ] buttons to move the highlight to the top. Remote control ProjectorRemote control Remote control ProjectorRemote control