Canon projector REALiS SX6000 D Pprojector Ro AV User Manual
Here you can view all the pages of manual Canon projector REALiS SX6000 D Pprojector Ro AV User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
131
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lens Shift Reset
[Lens shift Reset]
Resets the lens shift (P74) setting to the
standard position.
MENU > [System settings] > [Other settings] >
[Lens shift Reset]
MENU > [Install settings] > [Lens shift Reset]
Select [Lens shift Reset] and press the OK
button. The following screen for confirma-
tion appears.
Use the [ ]
/ [ ] buttons to select the
standard position, and then select OK.
The standard position varies depending...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-130.png "Page 131
131
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lens Shift Reset
[Lens shift Reset]
Resets the lens shift (P74) setting to the
standard position.
MENU > [System settings] > [Other settings] >
[Lens shift Reset]
MENU > [Install settings] > [Lens shift Reset]
Select [Lens shift Reset] and press the OK
button. The following screen for confirma-
tion appears.
Use the [ ]
/ [ ] buttons to select the
standard position, and then select OK.
The standard position varies depending...")
131 Setting Various Functions User’s ManualSettin g Functions from Menus Lens Shift Reset [Lens shift Reset] Resets the lens shift (P74) setting to the standard position. MENU > [System settings] > [Other settings] > [Lens shift Reset] MENU > [Install settings] > [Lens shift Reset] Select [Lens shift Reset] and press the OK button. The following screen for confirma- tion appears. Use the [ ] / [ ] buttons to select the standard position, and then select OK. The standard position varies depending...
Page 132
![Page 132
Setting Various Functions
132
Extending the Menu Dis-
play Time
[Menu display time]
The setting for the menu display time can
be extended from the normal 10 or 30 sec-
onds to 3 minutes. For the WUX5000 /
WUX4000, if [Extended] is set, when push-
ing and holding a button on the projector or
remote control, the same key repeat func-
tion will be enabled as when pressing a
button repeatedly.
MENU > [System settings] > [Other settings] >
[Menu display time]
MENU > [Install settings] > [On screen] >...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-131.png "Page 132
Setting Various Functions
132
Extending the Menu Dis-
play Time
[Menu display time]
The setting for the menu display time can
be extended from the normal 10 or 30 sec-
onds to 3 minutes. For the WUX5000 /
WUX4000, if [Extended] is set, when push-
ing and holding a button on the projector or
remote control, the same key repeat func-
tion will be enabled as when pressing a
button repeatedly.
MENU > [System settings] > [Other settings] >
[Menu display time]
MENU > [Install settings] > [On screen] >...")
Setting Various Functions 132 Extending the Menu Dis- play Time [Menu display time] The setting for the menu display time can be extended from the normal 10 or 30 sec- onds to 3 minutes. For the WUX5000 / WUX4000, if [Extended] is set, when push- ing and holding a button on the projector or remote control, the same key repeat func- tion will be enabled as when pressing a button repeatedly. MENU > [System settings] > [Other settings] > [Menu display time] MENU > [Install settings] > [On screen] >...
Page 133
![Page 133
133
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Showing / Hiding the High
Temperature Warning Icon
[Overheat Warning Display]
You can select whether or not to display
the [High temperature warning] icon when
the temperature inside the projector has
increased and is approaching the overheat
temperature.
MENU > [System settings] > [Other settings] >
[Overheat Warning Display]
MENU > [Install settings] > [On screen] > [Over-
heat warning display]
Press the OK button to accept...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-132.png "Page 133
133
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Showing / Hiding the High
Temperature Warning Icon
[Overheat Warning Display]
You can select whether or not to display
the [High temperature warning] icon when
the temperature inside the projector has
increased and is approaching the overheat
temperature.
MENU > [System settings] > [Other settings] >
[Overheat Warning Display]
MENU > [Install settings] > [On screen] > [Over-
heat warning display]
Press the OK button to accept...")
133 Setting Various Functions User’s ManualSettin g Functions from Menus Showing / Hiding the High Temperature Warning Icon [Overheat Warning Display] You can select whether or not to display the [High temperature warning] icon when the temperature inside the projector has increased and is approaching the overheat temperature. MENU > [System settings] > [Other settings] > [Overheat Warning Display] MENU > [Install settings] > [On screen] > [Over- heat warning display] Press the OK button to accept...
Page 134
![Page 134
Setting Various Functions
134
Reducing Flickering
[Deflicker]
This function adjusts the image display in
order to reduce flickering in the projected
image.
MENU > [System settings] > [Other settings] >
[Deflicker]
• When deflicker is performed, the image adjustment screen is projected for approx-
imately 20 seconds.
To cancel deflicker, press the POWER
button.
Gamma Restore
[Gamma restore]
This function is used when changing and
turning of the tone characteristics and ach-
romatic color is...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-133.png "Page 134
Setting Various Functions
134
Reducing Flickering
[Deflicker]
This function adjusts the image display in
order to reduce flickering in the projected
image.
MENU > [System settings] > [Other settings] >
[Deflicker]
• When deflicker is performed, the image adjustment screen is projected for approx-
imately 20 seconds.
To cancel deflicker, press the POWER
button.
Gamma Restore
[Gamma restore]
This function is used when changing and
turning of the tone characteristics and ach-
romatic color is...")
Setting Various Functions 134 Reducing Flickering [Deflicker] This function adjusts the image display in order to reduce flickering in the projected image. MENU > [System settings] > [Other settings] > [Deflicker] • When deflicker is performed, the image adjustment screen is projected for approx- imately 20 seconds. To cancel deflicker, press the POWER button. Gamma Restore [Gamma restore] This function is used when changing and turning of the tone characteristics and ach- romatic color is...
Page 135
![Page 135
135
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lamp Warning Display
[Lamp warning display]
A message that advises you to change the
lamp can be set to display when the lamp
has been used for the specified period of
time.
MENU > [Install settings] > [On screen] > [Lamp
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [On].
Regardless of the [Lamp warning display]
setting,...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-134.png "Page 135
135
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lamp Warning Display
[Lamp warning display]
A message that advises you to change the
lamp can be set to display when the lamp
has been used for the specified period of
time.
MENU > [Install settings] > [On screen] > [Lamp
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [On].
Regardless of the [Lamp warning display]
setting,...")
135 Setting Various Functions User’s ManualSettin g Functions from Menus Lamp Warning Display [Lamp warning display] A message that advises you to change the lamp can be set to display when the lamp has been used for the specified period of time. MENU > [Install settings] > [On screen] > [Lamp warning display] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory default is [On]. Regardless of the [Lamp warning display] setting,...
Page 136
![Page 136
Setting Various Functions
136
Select [Lamp counter] and press the OK
button to display the lamp counter.
Select [Reset] and press the OK button.
Select [OK] on the screen for confirmation
and press the OK button to reset the lamp
counter.
Press the MENU button or EXIT button
(WX6000 / SX6000).
■About the Display of the Lamp
Counter
The lamp counter displays the hours of
use of the lamp in the following way.
Less than 2,700 hours
Displayed as a green bar.
2,700 hours to less than 3,000 hours...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-135.png "Page 136
Setting Various Functions
136
Select [Lamp counter] and press the OK
button to display the lamp counter.
Select [Reset] and press the OK button.
Select [OK] on the screen for confirmation
and press the OK button to reset the lamp
counter.
Press the MENU button or EXIT button
(WX6000 / SX6000).
■About the Display of the Lamp
Counter
The lamp counter displays the hours of
use of the lamp in the following way.
Less than 2,700 hours
Displayed as a green bar.
2,700 hours to less than 3,000 hours...")
Setting Various Functions 136 Select [Lamp counter] and press the OK button to display the lamp counter. Select [Reset] and press the OK button. Select [OK] on the screen for confirmation and press the OK button to reset the lamp counter. Press the MENU button or EXIT button (WX6000 / SX6000). ■About the Display of the Lamp Counter The lamp counter displays the hours of use of the lamp in the following way. Less than 2,700 hours Displayed as a green bar. 2,700 hours to less than 3,000 hours...
Page 137
![Page 137
137
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Filter Warning Display
[Filter warning display]
A message advising you to perform clean-
ing can be set to display when the filter
needs cleaning.
MENU > [Install settings] > [On screen] > [Filter
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [On].
Resetting the Air Filter
Counter
[Filter counter]
This resets the counter which...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-136.png "Page 137
137
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Filter Warning Display
[Filter warning display]
A message advising you to perform clean-
ing can be set to display when the filter
needs cleaning.
MENU > [Install settings] > [On screen] > [Filter
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [On].
Resetting the Air Filter
Counter
[Filter counter]
This resets the counter which...")
137 Setting Various Functions User’s ManualSettin g Functions from Menus Filter Warning Display [Filter warning display] A message advising you to perform clean- ing can be set to display when the filter needs cleaning. MENU > [Install settings] > [On screen] > [Filter warning display] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory default is [On]. Resetting the Air Filter Counter [Filter counter] This resets the counter which...
Page 138
![Page 138
Setting Various Functions
138
Displaying Test Pattern
[Test pattern]
A test pattern for checking the resolution
and color when installing the projector can
be displayed.
MENU > [Install settings] > [Test pattern]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [Off].
While the test pattern is displayed, you can
use the
[] / [] buttons to change to a dif-
ferent test pattern. Also, if a test pattern has
option...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-137.png "Page 138
Setting Various Functions
138
Displaying Test Pattern
[Test pattern]
A test pattern for checking the resolution
and color when installing the projector can
be displayed.
MENU > [Install settings] > [Test pattern]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [Off].
While the test pattern is displayed, you can
use the
[] / [] buttons to change to a dif-
ferent test pattern. Also, if a test pattern has
option...")
Setting Various Functions 138 Displaying Test Pattern [Test pattern] A test pattern for checking the resolution and color when installing the projector can be displayed. MENU > [Install settings] > [Test pattern] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory default is [Off]. While the test pattern is displayed, you can use the [] / [] buttons to change to a dif- ferent test pattern. Also, if a test pattern has option...
Page 139
![Page 139
139
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Selecting Audio In Termi-
nal
[Audio in terminal select]
You can select the audio in terminal that is
used for each input signal (HDMI, Digital
PC, Analog PC-1, Analog PC-2, Compo-
nent).
MENU > [Install settings] > [Audio in terminal
select]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default is as follows.
HDMI: HDMI
Digital PC: Audio in 2
Analog...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-138.png "Page 139
139
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Selecting Audio In Termi-
nal
[Audio in terminal select]
You can select the audio in terminal that is
used for each input signal (HDMI, Digital
PC, Analog PC-1, Analog PC-2, Compo-
nent).
MENU > [Install settings] > [Audio in terminal
select]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default is as follows.
HDMI: HDMI
Digital PC: Audio in 2
Analog...")
139 Setting Various Functions User’s ManualSettin g Functions from Menus Selecting Audio In Termi- nal [Audio in terminal select] You can select the audio in terminal that is used for each input signal (HDMI, Digital PC, Analog PC-1, Analog PC-2, Compo- nent). MENU > [Install settings] > [Audio in terminal select] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). • The factory default is as follows. HDMI: HDMI Digital PC: Audio in 2 Analog...
Page 140
![Page 140
Setting Various Functions
140
Resetting to the Default Setting
[Factory defaults]
You can reset the menu item settings and
restore the system settings to the factory
defaults.
MENU > [System settings] > [Other settings] >
[Factory defaults]
MENU > [System settings] > [Other settings] >
[Factory defaults]
Select [Factory defaults] and press the OK
button. The following screen for confirma-
tion appears.
This function does not reset the values for
[Lamp counter], [Language], [Remote con-
trol],...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-139.png "Page 140
Setting Various Functions
140
Resetting to the Default Setting
[Factory defaults]
You can reset the menu item settings and
restore the system settings to the factory
defaults.
MENU > [System settings] > [Other settings] >
[Factory defaults]
MENU > [System settings] > [Other settings] >
[Factory defaults]
Select [Factory defaults] and press the OK
button. The following screen for confirma-
tion appears.
This function does not reset the values for
[Lamp counter], [Language], [Remote con-
trol],...")
Setting Various Functions 140 Resetting to the Default Setting [Factory defaults] You can reset the menu item settings and restore the system settings to the factory defaults. MENU > [System settings] > [Other settings] > [Factory defaults] MENU > [System settings] > [Other settings] > [Factory defaults] Select [Factory defaults] and press the OK button. The following screen for confirma- tion appears. This function does not reset the values for [Lamp counter], [Language], [Remote con- trol],...