Canon projector REALiS SX6000 D Pprojector Ro AV User Manual

101
Setting Display Status
User’s ManualSettin
g Functions from Menus
Performing Progressive 
Processing
[Progressive]
You can select this as required when the 
images have low resolution.
MENU > [Display settings] > [Progressive]
MENU > [Input settings] > [Progressive]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
Auto] is the factory default.
 When [HDMI In] (P127) is [Computer], this 
can only be set when the input signal is 
1080i,...

Setting Display Status
102
Selecting a Menu Position
[Menu position]
You can change the position of menus dis-
played.
MENU > [Display settings] > [Menu position]
MENU > [Install settings] > [On screen] > [Menu 
position]
Move the menu to the desired position 
with the [ ] / [ ] / [ ] / [ ] buttons.When the menu has been moved to the 
desired position, press the OK, MENU or 
EXIT button (WX6000 / SX6000).
HDMIComponent
Digital PCAnalog PC 

103
Setting Display Status
User’s ManualSettin
g Functions from Menus
Correcting the Screen 
Color
[Screen color]
You can adjust the color quality of the 
images projected according to the color of 
the projection screen.
MENU > [Display settings] > [Screen color]
MENU > [Install settings] > [Screen color]Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 [Normal] is the factory default.
HDMIComponent
Digital PCAnalog PC
NormalSelect this if a...

Setting Display Status
104
Reversing Projection
[Image flip H/V]
Select this setting if you want to hang the 
projector from the ceiling or project an 
image from behind the screen.
MENU > [Display settings] > [Image flip H/V]
MENU > [Install settings] > [Image flip H/V]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 [None] is the factory default.
HDMIComponent
Digital PCAnalog PC
NoneSelect this to project an image 
normally.
Ceiling...

105
Setting Display Status
User’s ManualSettin
g Functions from Menus
 To hang the projector from the ceiling, use 
the optional bracket. Contact the Canon 
Customer Support Center for more 
detailed information.
 If you flip the image, the keystone distor-
tion adjustment will be reset.
No Signal Screen
[No signal screen]
You can display either a black or blue 
screen when there is no input signal.
MENU > [Display settings]> [User screen set-
tings] > [No signal screen>
MENU > [System settings] > [User...

Setting Display Status
106
Screen When Blank
[Screen when blank]
You can display a black or blue screen and 
temporarily blank out the projected image 
by pressing the BLANK button on the 
remote control.
MENU > [Display settings] > [User screen set-
tings] > [Screen when blank]
MENU > [System settings] > [User screen set-
tings] > [Screen when blank]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 [Black] is the factory default.
Selecting a...

107
Setting Display Status
User’s ManualSettin
g Functions from Menus
Selecting Aspect Ratio of 
Screen
[Screen aspect]
Select according to the aspect ratio of the 
projection screen. (P63)
MENU > [Display settings]> [Screen aspect]
MENU > [Install settings] > [Screen aspect]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 The factory default is [16:10] for the 
WUX5000 / WUX4000 / WX6000, and [4:3] 
for the SX6000.
 If you select [16:9 D....

Setting Display Status
108
Adjusting Keystone Dis-
tortion
[Keystone adjustment]
Corrects keystone distortion.
MENU > [Install settings] > [Keystone adjust-
ment]
If the OK button or [ ] button is pressed, 
the Keystone adjustment screen is dis-
played.
Correct using the [ ] / [ ] / [ ] / [ ] but-
tons. When you have finished correcting, 
press the OK button.
 This cannot be selected when the screen 
aspect is 16:9D image shift, 16:10D image 
shift or 4:3D image shift.
 The Keystone adjustment screen can...

109
User’s ManualSettin
g Functions from Menus
Selecting an Image Quality
Image Adjustment
[Image mode]
You can select an image mode suitable for 
the projected image. (P78)
You can also select it with the IMAGE but-
ton on the remote control. (P79)
MENU > [Image adjustment] > [Image mode]
(The screen is for the WUX5000.)
MENU > [Image adjustment] > [Image mode]
Press the OK button to accept your setting 
and then press the MENU button or EXIT 
button (WX6000 / SX6000).
 [Standard] is the factory...

Selecting an Image Quality
110
(The screen is for the WUX5000.)
Saving the Desired Image 
Quality
[Create profile]
Up to 5 combinations of image quality set-
tings can be stored. The stored image 
quality can be selected as an image mode.
MENU > [Image adjustment] > [Create Profile]
(The screen is for the WUX5000.)
MENU > [Image adjustment] > [Create profile]
Use the [ ] / [ ] buttons and select the 
save destination. (Saved memories are 
indicated by checkmarks.)
HDMIComponent
Digital PCAnalog PC