Canon projector REALiS SX6000 D Pprojector Ro AV User Manual

61
User’s ManualProjectin
g an Ima
ge
Adjusting the Image
Setting the Display Resolution of the Computer
Based on the maximum resolution of the projector, set the display resolution of the com-
puter to the resolution closest to the output signal resolution of the projector. (P218)
Maximum resolution
WUX5000 / WUX4000: 1920 X 1200 dots
SX6000: 1400 X 1050 dots
WX6000: 1440 X 900 dots
■Windows 7
1Open the [Control Panel] from the start 
menu, then select [Appearance and Per-
sonalization] - [Adjust screen...

Adjusting the Image
62
■Mac OS X
1Open the Apple Menu and select [System 
Preferences].
2In the [System Preferences] window, click 
the [Displays] icon to display the Display 
window.
3Select the [Display] tab and select the res-
olution closest to the maximum output sig-
nal resolution of the computer from the 
[Resolutions] list.
4Close the [System Preferences] window.
AUTO PC
If the image display is shifted or there is flickering of the screen when [Analog PC] 
(WUX5000 / WUX4000) or [Analog PC-1]...

63
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
Selecting Screen Aspect and Aspect
Select an optimum aspect ratio of the projected image (screen aspect) or an optimum 
screen mode (aspect) according to the aspect ratio of the screen, type of input image 
signal and so on for the projection to make best use of the screen size.
[Screen aspect]Select the same screen aspect ratio as the screen you are using.
[Aspect]In general, select [Auto].
You may need to change the setting depending on the...

Adjusting the Image
64
2Use the [ ] / [ ] buttons to select the [Display settings] tab (WUX5000 / WUX4000) or 
[Install settings] (WX6000 / SX6000).
3Select [Screen aspect] with the [] / [ ], and then press the OK button.
Remote control
ProjectorRemote control
Remote control
ProjectorRemote control 

65
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
4Use the [] / [ ] buttons to select the desired contents.
Screen aspect compatibility for each model of projector is as follows.
 : Compatible    : Not compatible
WUX5000WUX4000WX6000SX6000
16:10
16:9
4:3
16:10 D. image shift
16:9 D. image shift
4:3 D. image shift
Remote control
ProjectorRemote control 

Adjusting the Image
66
16:10
Select this when you use a screen with aspect ratio of 
16:10. Also, select this when you project an image on 
a wall. You can correct keystone distortion with this 
mode. (P76)
16:9
Select this when you use a screen with aspect ratio of 
16:9. You can correct keystone distortion with this 
mode. (P76)
4:3
Select this when you use a screen with aspect ratio of 
4:3. You can correct keystone distortion with this 
mode. (P76)
16:10 D. image shift (SX6000)
Select when the screen...

67
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
Moving Image with 16:9 D. Image Shift / 16:10 D. Image Shift (SX6000)
16:10 D. image shift cannot be used for the WUX5000, WUX4000 and WX6000.
1For the WUX5000 / WUX4000, when the screen aspect is [16:9 D. image shift], if the 
D.SHIFT/KEYSTONE button is pressed, the screen below on the right is displayed.
For the WX6000 / SX6000, when the screen aspect is [16:9 D. image shift], and for 
the SX6000, when the screen aspect is set to [16:10 D. image...

Adjusting the Image
68
Moving Image with 4:3 D. Image Shift (WUX5000 / WUX4000 / WX6000)
4:3 D image shift cannot be used for SX6000.
1For the WUX5000 / WUX4000, when the screen aspect is [4:3 D. image shift], if the 
D.SHIFT/KEYSTONE button is pressed, the screen below on the right is displayed.
For the WX6000, when the screen aspect is set to [4:3 D. image shift], press the 
MENU button, select the [Installation settings] tab with the [ ] and [ ] buttons, and 
then select [Digital image shift] with the...

69
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
Resetting the Image Shift
Perform the following steps to reset the image shift adjustment.
Press the D.SHIFT/KEYSTONE button (WUX5000 / WUX4000), twice to display the [D. 
image shift reset] window.
Then, select [OK] with the [] button and press the OK button.
■Selecting Aspect Ratio
Select [Aspect] based on the input signal type, aspect ratio of the screen and resolution.
For more details about aspect ratios, refer to page 207.
Types of Aspect...

Adjusting the Image
70
How to Select an Aspect Ratio
Press the ASPECT button on the remote control and select an appropriate aspect ratio. Press the 
ASPECT button to change the aspect ratio type.
For more details about aspect ratios, refer to page 207.
You can also select any aspect ratio from [Aspect] in the menu. (P93)
Some aspect ratios may not appear depending on the type of input signal.
Example:Remote control