Canon projector REALiS SX6000 D Pprojector Ro AV User Manual
Here you can view all the pages of manual Canon projector REALiS SX6000 D Pprojector Ro AV User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
How to Use Menus
91
User’s ManualSettin
g Functions from Menus
3Use the [] / [] buttons to select an item.
Remote control
ProjectorRemote control](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-90.png "Page 91
How to Use Menus
91
User’s ManualSettin
g Functions from Menus
3Use the [] / [] buttons to select an item.
Remote control
ProjectorRemote control")
How to Use Menus 91 User’s ManualSettin g Functions from Menus 3Use the [] / [] buttons to select an item. Remote control ProjectorRemote control
Page 92
![Page 92
How to Use Menus
92
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect
Adjusting with the [ ] / [ ] buttons Example: Contrast
Selecting from a different screen (1) Example: Menu position
Selecting from a different screen (2) Example: Tracking
5Pressing the MENU button causes the menu screen to disappear.
The menu screen will also disappear if the EXIT button (WX6000 / SX6000) is
pressed.
1. Select Aspect.
2. Press the OK button or [ ]...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-91.png "Page 92
How to Use Menus
92
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect
Adjusting with the [ ] / [ ] buttons Example: Contrast
Selecting from a different screen (1) Example: Menu position
Selecting from a different screen (2) Example: Tracking
5Pressing the MENU button causes the menu screen to disappear.
The menu screen will also disappear if the EXIT button (WX6000 / SX6000) is
pressed.
1. Select Aspect.
2. Press the OK button or [ ]...")
How to Use Menus 92 4Select contents. How to select the contents varies depending on the item. Selecting from a list Example: Aspect Adjusting with the [ ] / [ ] buttons Example: Contrast Selecting from a different screen (1) Example: Menu position Selecting from a different screen (2) Example: Tracking 5Pressing the MENU button causes the menu screen to disappear. The menu screen will also disappear if the EXIT button (WX6000 / SX6000) is pressed. 1. Select Aspect. 2. Press the OK button or [ ]...
Page 93
![Page 93
93
User’s ManualSettin
g Functions from Menus
Setting Display Status
Selecting an Image Pro-
jection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of the image.
(P69)
MENU > [Display settings] > [Aspect]
MENU > [Input settings] > [Aspect]
Different contents are displayed for differ-
ent screen aspects or input signal types.
ASPECT button on the remote control
can also be used to select the Aspect set-
tings.
Press the OK button to accept your setting
and then...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-92.png "Page 93
93
User’s ManualSettin
g Functions from Menus
Setting Display Status
Selecting an Image Pro-
jection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of the image.
(P69)
MENU > [Display settings] > [Aspect]
MENU > [Input settings] > [Aspect]
Different contents are displayed for differ-
ent screen aspects or input signal types.
ASPECT button on the remote control
can also be used to select the Aspect set-
tings.
Press the OK button to accept your setting
and then...")
93 User’s ManualSettin g Functions from Menus Setting Display Status Selecting an Image Pro- jection Mode [Aspect] You can select a projection mode corre- sponding to the aspect ratio of the image. (P69) MENU > [Display settings] > [Aspect] MENU > [Input settings] > [Aspect] Different contents are displayed for differ- ent screen aspects or input signal types. ASPECT button on the remote control can also be used to select the Aspect set- tings. Press the OK button to accept your setting and then...
Page 94
![Page 94
Setting Display Status
94
Automatic Display
Adjustment
[Auto PC]
Automatically adjusts display position mis-
alignment and screen flickering. The
adjusted result is stored in the memory.
MENU > [Input settings] > [Auto PC]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
Selecting an Input Signal
Type (Analog PC)
[Input signal select]
You can select a suitable resolution if the
auto PC adjustment function (P62) cannot
project the correct...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-93.png "Page 94
Setting Display Status
94
Automatic Display
Adjustment
[Auto PC]
Automatically adjusts display position mis-
alignment and screen flickering. The
adjusted result is stored in the memory.
MENU > [Input settings] > [Auto PC]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
Selecting an Input Signal
Type (Analog PC)
[Input signal select]
You can select a suitable resolution if the
auto PC adjustment function (P62) cannot
project the correct...")
Setting Display Status 94 Automatic Display Adjustment [Auto PC] Automatically adjusts display position mis- alignment and screen flickering. The adjusted result is stored in the memory. MENU > [Input settings] > [Auto PC] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). Selecting an Input Signal Type (Analog PC) [Input signal select] You can select a suitable resolution if the auto PC adjustment function (P62) cannot project the correct...
Page 95
![Page 95
95
Setting Display Status
User’s ManualSettin
g Functions from Menus
Selecting an Input Signal
Type (Component)
[Input signal select]
You can select the proper component sig-
nal type if the video image from AV equip-
ment is not projected correctly.
MENU > [Display settings]> [Input signal select]
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
Refer to the user’s manual for the AV
equipment connected to the projector to
confirm the...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-94.png "Page 95
95
Setting Display Status
User’s ManualSettin
g Functions from Menus
Selecting an Input Signal
Type (Component)
[Input signal select]
You can select the proper component sig-
nal type if the video image from AV equip-
ment is not projected correctly.
MENU > [Display settings]> [Input signal select]
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
Refer to the user’s manual for the AV
equipment connected to the projector to
confirm the...")
95 Setting Display Status User’s ManualSettin g Functions from Menus Selecting an Input Signal Type (Component) [Input signal select] You can select the proper component sig- nal type if the video image from AV equip- ment is not projected correctly. MENU > [Display settings]> [Input signal select] Press the OK button to accept your setting and then press the MENU button. • [Auto] is the factory default. Refer to the user’s manual for the AV equipment connected to the projector to confirm the...
Page 96
![Page 96
Setting Display Status
96
Adjust Input Signal Type
(Analog PC) Tracking
[Tracking]
You can fine-tune the timing for generating
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
MENU > [Display settings]> [Input signal set-
tings] > [Tracking]
MENU > [Input settings] > [Input signal
settings] > [Tracking]
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the OK button to accept your
setting and then press the MENU button
or...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-95.png "Page 96
Setting Display Status
96
Adjust Input Signal Type
(Analog PC) Tracking
[Tracking]
You can fine-tune the timing for generating
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
MENU > [Display settings]> [Input signal set-
tings] > [Tracking]
MENU > [Input settings] > [Input signal
settings] > [Tracking]
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the OK button to accept your
setting and then press the MENU button
or...")
Setting Display Status 96 Adjust Input Signal Type (Analog PC) Tracking [Tracking] You can fine-tune the timing for generating an image from the image signal. Adjusts the tracking when the image dis- torts or flickers. MENU > [Display settings]> [Input signal set- tings] > [Tracking] MENU > [Input settings] > [Input signal settings] > [Tracking] Use [ ] / [ ] to select a value. When you have completed the adjust- ment, press the OK button to accept your setting and then press the MENU button or...
Page 97
![Page 97
97
Setting Display Status
User’s ManualSettin
g Functions from Menus
Adjust Input Signal Type
(Analog PC) Vertical Posi-
tion
[Vertical position]
You can adjust the vertical position of the
screen when the projected image is shifted
in the vertical direction.
MENU > [Display settings]> [Input signal set-
tings] > [Vertical position]
MENU > [Input settings] > [Input signal
settings] > [Vertical position]
Use [ ] / [ ] to select a value. As the
value increases, the screen moves
upward.
When you have...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-96.png "Page 97
97
Setting Display Status
User’s ManualSettin
g Functions from Menus
Adjust Input Signal Type
(Analog PC) Vertical Posi-
tion
[Vertical position]
You can adjust the vertical position of the
screen when the projected image is shifted
in the vertical direction.
MENU > [Display settings]> [Input signal set-
tings] > [Vertical position]
MENU > [Input settings] > [Input signal
settings] > [Vertical position]
Use [ ] / [ ] to select a value. As the
value increases, the screen moves
upward.
When you have...")
97 Setting Display Status User’s ManualSettin g Functions from Menus Adjust Input Signal Type (Analog PC) Vertical Posi- tion [Vertical position] You can adjust the vertical position of the screen when the projected image is shifted in the vertical direction. MENU > [Display settings]> [Input signal set- tings] > [Vertical position] MENU > [Input settings] > [Input signal settings] > [Vertical position] Use [ ] / [ ] to select a value. As the value increases, the screen moves upward. When you have...
Page 98
![Page 98
Setting Display Status
98
Adjust Input Signal Type
(Analog PC) Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in
the vertical direction if the screen is too
long or too short in the vertical direction.
MENU > [Display settings] > [Input signal set-
tings] > [Vertical pixels]
MENU > [Input settings] > [Input signal
settings] > [Vertical pixels]
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the OK button to accept your
setting and then...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-97.png "Page 98
Setting Display Status
98
Adjust Input Signal Type
(Analog PC) Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in
the vertical direction if the screen is too
long or too short in the vertical direction.
MENU > [Display settings] > [Input signal set-
tings] > [Vertical pixels]
MENU > [Input settings] > [Input signal
settings] > [Vertical pixels]
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the OK button to accept your
setting and then...")
Setting Display Status 98 Adjust Input Signal Type (Analog PC) Vertical Pixels [Vertical pixels] You can adjust the number of the pixels in the vertical direction if the screen is too long or too short in the vertical direction. MENU > [Display settings] > [Input signal set- tings] > [Vertical pixels] MENU > [Input settings] > [Input signal settings] > [Vertical pixels] Use [ ] / [ ] to select a value. When you have completed the adjust- ment, press the OK button to accept your setting and then...
Page 99
![Page 99
99
Setting Display Status
User’s ManualSettin
g Functions from Menus
[Expanded], we recommend you to set
[Expanded]. The contrast of images will be
improved and dark scenes will be rendered
more realistically. In this case, select [Auto]
or [Expanded] for the HDMI input level.
For more detailed information, refer to the
user’s manual for the AV equipment con-
nected to the projector.HDMI Color Format
[HDMI color space]
Select the color space for the HDMI signal.
MENU > [Display settings] > [HDMI...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-98.png "Page 99
99
Setting Display Status
User’s ManualSettin
g Functions from Menus
[Expanded], we recommend you to set
[Expanded]. The contrast of images will be
improved and dark scenes will be rendered
more realistically. In this case, select [Auto]
or [Expanded] for the HDMI input level.
For more detailed information, refer to the
user’s manual for the AV equipment con-
nected to the projector.HDMI Color Format
[HDMI color space]
Select the color space for the HDMI signal.
MENU > [Display settings] > [HDMI...")
99 Setting Display Status User’s ManualSettin g Functions from Menus [Expanded], we recommend you to set [Expanded]. The contrast of images will be improved and dark scenes will be rendered more realistically. In this case, select [Auto] or [Expanded] for the HDMI input level. For more detailed information, refer to the user’s manual for the AV equipment con- nected to the projector.HDMI Color Format [HDMI color space] Select the color space for the HDMI signal. MENU > [Display settings] > [HDMI...
Page 100
![Page 100
Setting Display Status
100
Select HDMI Over Scan
[HDMI over scan]
You can select this as required when you
project visual software using an HDMI sig-
nal.
MENU > [Display settings] > [HDMI over scan]
MENU > [Input settings] > [HDMI over scan]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory defaults settings are [On]
when [HDMI In] (P127) is set for [Auto]
and [Off] when it is set for [Computer].
HDMIComponent
Digital PCAnalog...](http://img.usermanuals.tech/thumb/14/1330/w300_projector-realis-sx6000-d-pprojector-ro-av-1478292962_d-99.png "Page 100
Setting Display Status
100
Select HDMI Over Scan
[HDMI over scan]
You can select this as required when you
project visual software using an HDMI sig-
nal.
MENU > [Display settings] > [HDMI over scan]
MENU > [Input settings] > [HDMI over scan]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory defaults settings are [On]
when [HDMI In] (P127) is set for [Auto]
and [Off] when it is set for [Computer].
HDMIComponent
Digital PCAnalog...")
Setting Display Status 100 Select HDMI Over Scan [HDMI over scan] You can select this as required when you project visual software using an HDMI sig- nal. MENU > [Display settings] > [HDMI over scan] MENU > [Input settings] > [HDMI over scan] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory defaults settings are [On] when [HDMI In] (P127) is set for [Auto] and [Off] when it is set for [Computer]. HDMIComponent Digital PCAnalog...