Canon printer PIXMA MX492 User Manual
Have a look at the manual Canon printer PIXMA MX492 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4. Setting pattern print When the Pattern Print dialog box opens, set the following items, and then click OK. Parameters to Adjust Select Cyan/Magenta/Yellow . Important • When the Grayscale Printing check box on the Main tab is checked, Cyan/Magenta/Yellow appear grayed out and are unavailable. Printer Paper Size Select the paper size to be used for pattern printing. Note • Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot be selected. Amount of Pattern Instances Select Largest , Large , or Small to set the number of patterns to be printed. Note • Largest and Large cannot be selected when certain paper sizes or output paper sizes are selected. Color Variation Between Instances Set the amount of color change between neighboring patterns. 381
Note• Large is about double the size of Medium, and Small is about half the size of Medium. 5. Checking the print results of pattern print On the Color Adjustment tab, select OK to close the Manual Color Adjustment dialog box. On the Main tab, select OK, and then execute printing. The printer then prints a pattern in which the color balance that you set is the center value. Important • Normally, patterns are printed with the color balance settings as the center values. However, when Black Only is selected for Ink Cartridge Settings on the Maintenance tab, the color balance settings are not applied to pattern printing. 6. Adjusting the color balance Look at the print results and select the image that you like best. Then enter the color balance numbersindicated at the bottom of that image into the Cyan, Magenta , and Yellow fields on the Color Adjustment tab. Clear the Print a pattern for color adjustment check box, and click OK. 382
Note • You can also set color balance on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings , and then choosing Color/Intensity Manual Adjustment under Additional Features . 7. Complete the setup Click OK on the Main tab. Then when you execute printing, the document is printed with the color balance that was adjusted by the pattern print function. Important • When Print a pattern for color adjustment is selected on the Color Adjustment tab, the following items are grayed out and cannot be set: • Preview before printing on the Main tab • Stapling Side and Specify Margin... on the Page Setup tab (When Duplex Printing (Manual) is set, only Stapling Side can be set.) • You can print a pattern only if the Page Layout setting on the Page Setup tab is Normal-size or Borderless . • When the Grayscale Printing check box on the Main tab is checked, Cyan, Magenta , and Yellow appear grayed out and are unavailable. • Depending on your application software, this function may not be available. Related Topics Adjusting Color Balance Adjusting Intensity Adjusting Contrast Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) 383
Adjusting BrightnessYou can change the brightness of the overall image data during printing. This function does not change pure white or pure black but it changes the brightness of the intermediate colors. The following sample shows the print result when the brightness setting is changed.Light is selectedNormal is selectedDark is selected The procedure for adjusting brightness is as follows: You can also set brightness on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings , and then choosing Color/Intensity Manual Adjustment under Additional Features . 1. Open the printer driver setup window 2. Select the manual color adjustment On the Main tab, select Manual for Color/Intensity , and click Set.... The Manual Color Adjustment dialog box opens. 3. Specify the brightness Select Light, Normal , or Dark for Brightness , and click OK. The current settings are displayed in the settings preview on the left side of the printer driver. 384
4. Complete the setup Click OK on the Main tab. When you execute print, the data is printed at the specified brightness. Related Topics Setting the Print Quality Level (Custom) Specifying Color Correction Adjusting Color Balance Adjusting Intensity Adjusting Contrast 385
Adjusting IntensityYou can dilute (brighten) or intensify (darken) the colors of the overall image data during printing. The following sample shows the case when the intensity is increased so that all colors become more intense when the image data is printed.No adjustmentHigher intensity The procedure for adjusting intensity is as follows: You can also set intensity on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings , and then choosing Color/Intensity Manual Adjustment under Additional Features . 1. Open the printer driver setup window 2. Select the manual color adjustment On the Main tab, select Manual for Color/Intensity , and click Set.... The Manual Color Adjustment dialog box opens. 3. Adjust intensity Moving the Intensity slider to the right intensifies (darkens) the colors, and moving the slider to the left dilutes (brightens) the colors. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The current settings are displayed in the settings preview on the left side of the printer driver. After adjusting each color, click OK. 386
4. Complete the setup Click OK on the Main tab. When you execute print, the image data is printed with the adjusted intensity. Related Topics Setting the Print Quality Level (Custom) Specifying Color Correction Adjusting Color Balance Adjusting Color Balance Using Sample Patterns (Printer Driver) Adjusting Brightness Adjusting Contrast Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) 387
Adjusting ContrastYou can adjust the image contrast during printing. To make the differences between the light and dark portions of images greater and more distinct, increase the contrast. On the other hand, to make the differences between the light and dark portions of images smaller and less distinct, reduce the contrast.No adjustmentAdjust the contrast The procedure for adjusting contrast is as follows: You can also set contrast on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings , and then choosing Color/Intensity Manual Adjustment under Additional Features . 1. Open the printer driver setup window 2. Select the manual color adjustment On the Main tab, select Manual for Color/Intensity , and click Set.... The Manual Color Adjustment dialog box opens. 3. Adjust the contrast Moving the Contrast slider to the right increases the contrast, and moving the slider to the left decreases the contrast. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The current settings are displayed in the settings preview on the left side of the printer driver. 388
After adjusting each color, click OK.4. Complete the setup Click OK on the Main tab. When you execute print, the image is printed with the adjusted contrast. Related Topics Setting the Print Quality Level (Custom) Specifying Color Correction Adjusting Color Balance Adjusting Color Balance Using Sample Patterns (Printer Driver) Adjusting Brightness Adjusting Intensity Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) 389
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)You can look at the print results of pattern print and adjust the intensity/contrast. When you change the color balance or intensity/contrast of a document, the pattern print function prints the adjustment results in a list, together with the adjustment values. Described below is the procedure for adjusting the intensity/contrast while looking at the pattern.1. Open the printer driver setup window 2. Select the manual color adjustment On the Main tab, select Manual for Color/Intensity , and click Set.... The Manual Color Adjustment dialog box opens. 3. Selecting pattern print On the Color Adjustment tab, select the Print a pattern for color adjustment check box, and click Pattern Print preferences... . 390