Canon printer PIXMA MG6821 User Manual
Have a look at the manual Canon printer PIXMA MG6821 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11.When the completion message appears, tap OK. If the problem is not resolved after cleaning the paper feed roller, contact the service center. 221
Cleaning the Inside of the Machine (Bottom Plate Cleaning)Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper mayget dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.1. Make sure that the power is turned on. 2. Flick the HOME screen, then tap Setup . Using the Operation Panel The setup menu screen will appear. 3. Tap Maintenance . The Maintenance screen will appear. 4. Tap Bottom plate cleaning . The confirmation screen will appear. 5. Tap Yes. 6. Follow the message to remove any paper from the cassette, then tap OK. 7. Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the paper. 8. Fold one side of the opened paper in another half, aligning the edge with the center crease, unfold the paper, then tap OK. 222
9. Load only this sheet of paper in the cassette with the ridges of the creases facing up and the edge of the half with no crease facing to the far side. 10. Open the paper output tray gently, then tap OK. The paper cleans the inside of the machine as it feeds through the machine. Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again. 11. When the completion message appears, tap OK. Note
Overview Safety Safety Precautions Regulatory Information Main Components and Their Use Main Components Power Supply Using the Operation Panel Changing Settings Changing Printer Settings from Your Computer (Windows) Changing Printer Settings from Your Computer (Mac OS) Changing Settings from Operation Panel Setting Up Card Slot as Memory Card Drive of Computer Network Connection Network Connection Tips Network Communication (Windows) Checking and Changing Network Settings IJ Network Tool (Network Connection) IJ Network Tool (Other Screens) Network Communication Tips Network Communication (Mac OS) Checking and Changing Network Settings Network Communication Tips Ensuring Optimal Printing Results Ink Tips Printing Tips Check Paper Settings Before Printing Set Cassette Paper Information After Loading Paper 224
Canceling a Print Job Keeping Print Quality High Transporting Your Printer Legal Restrictions on Scanning/Copying Specifications 225
Safety Safety Precautions Regulatory Information 226
Regulatory InformationFor models containing lithium battery
Users in Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person's body (excluding extremities: hands, wrists, feet and ankles). Pour les usagers rpsidant au Canada Le prpsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorispe aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioplectrique subi, mrme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet pquipement est conforme aux limites d'exposition aux rayonnements pnoncpes pour un environnement non contr{lp et respecte les rqgles d'exposition aux frpquences radioplectriques (RF) CNR-102 de l'IC. Cet pquipement doit rtre installp et utilisp en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps (j l'exception des extrpmitps : mains, poignets, pieds et chevilles). Only for European Union and EEA (Norway, Iceland and Liechtenstein) This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon- europe.com/weee. Korisnici u Srbiji Ovaj simbol ozna