Canon printer PIXMA MG6821 User Manual
Have a look at the manual Canon printer PIXMA MG6821 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1715Cause Ink absorber is almost full. What to Do Tap OK on the touch screen to continue printing. Contact your nearest Canon service center to request a repair. 1001
1730Cause The ink tank may be an ink tank that ran out of genuine Canon ink or a counterfeit Canon ink tank. What to Do To print, you must replace the ink tank or disable the function for detecting the remaining ink level. To disable the function for detecting the remaining ink level, press and hold the printer's Stop button for at least 5 seconds, and then release it. By this operation, the fact that you have disabled the function for detecting the remaining ink level will be memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition or by using refilled ink tanks. Note
1731Cause Non-genuine Canon ink tank has been detected. What to DoTo print, you must replace the ink tank or disable the function for detecting the remaining ink level. Todisable the function for detecting the remaining ink level, press and hold the printer's Stop button for at least 5 seconds, and then release it. By this operation, the fact that you have disabled the function for detecting the remaining ink level will be memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by using a non-genuine Canon ink tank. Note
1750Cause Appropriate ink tank is not installed. What to DoPrinting cannot be executed because the ink tank is not compatible with this machine. Install the appropriate ink tank. If you want to cancel printing, press the machine's Stop button. 1004
1871Cause Cassette is not inserted. What to Do Close the paper output tray, and push the cassette so that the mark on the cassette aligns with the mark on the machine. Open the paper output tray and tap OK on the touch screen of the machine. Note
1890Cause Protective material or tape may still be attached to print head holder. What to Do Open the operation panel and make sure the protective material and tape have been removed from the print head holder. If the protective material or tape is still there, remove it and close the operation panel. If this does not solve the problem, contact your nearest Canon service center to request a repair. 1006
2110Cause Paper settings for printing or copying differ from cassette paper information set on machine. Note
What to DoTapping OK on the touch screen again, the screen below appears. Select the appropriate action. Note
2120Cause Cassette paper settings are incomplete. What to DoIf screen below is shown, the cassette paper settings are incomplete. Tap OK or Cancel on the touch screen of the machine to finish setting the cassette paper settings. 1010