Canon printer PIXMA MG5620 User Manual

Cannot Scan Properly with Auto Scan
Check 1 Make sure that the items are placed correctly.
Placing Items (When Scanning from a Computer)
Check 2
 Multiple items scanning may not be supported.
Some applications do not support multiple image scanning. In that case, scan each item individually.
781 

Slow Scanning Speed
Check 1 To view the image on a monitor, set the output resolution to around 150 dpi. To
print, set it to around 300 dpi.
Resolution
Check 2  Set Fading Correction , Grain Correction , etc. to None.
Refer to "Image Settings" for your model from Home of the  Online Manual for details.
Check 3
 In IJ Scan Utility, deselect the  Correct slanted text document  / Detect the
orientation of text document and rotate image  checkbox and scan again.
Settings (Document Scan) Dialog Box...

"There is not enough memory." Message Is Displayed
Check 1 Exit other applications and try again.
Check 2
 Reduce the resolution or output size and scan again.
Resolution
783 

Computer Stops Operating during Scanning
Check 1 Restart the computer, reduce the output resolution in ScanGear (scanner
driver) and scan again.
Refer to "Output Settings" for your model from Home of the  Online Manual for details.
Check 2
 Delete unnecessary files to obtain sufficient free hard disk space, then scan
again.
Error message may appear if there is not enough hard disk space to scan and save, when the image size is too large (such as when scanning a large item at high resolution)....

Scanner Does Not Work after Upgrading Windows
Check Disconnect the USB cable, then uninstall (delete) and reinstall MP Drivers and IJ
Scan Utility.
Step 1: Uninstall MP Drivers.
Refer to "Deleting the Unnecessary MP Drivers" for your model from Home of the  Online Manual for how to
delete MP Drivers.
Step 2: Uninstall IJ Scan Utility.
•
Windows 8.1 / Windows 8:
1.
Click the  Settings charm >  Control Panel  > Programs  > Programs and Features .
2.
Double-click Canon IJ Scan Utility .
3.
When a...

Scanned Image Does Not Open
Check If the data format is not supported by the application, scan the image again and
select a popular data format such as JPEG when saving it.
Refer to the application's manual for details. If you have any questions, contact the manufacturer of the
application.
786 

Scan Results Not Satisfactory
Scan Quality (Image Displayed on the Monitor) Is Poor
Scanned Image Is Surrounded by Extra White Areas
Cannot Scan at the Correct Size
Position or Size of the Image Cannot be Detected Correctly When Scanning
from the Operation Panel
Item Is Placed Correctly, but the Scanned Image Is Slanted
Scanned Image Is Enlarged (Reduced) on the Computer Monitor
787 

Scan Quality (Image Displayed on the Monitor) Is Poor
Check 1 If the image is jagged, increase the scanning resolution, or select  TIFF or PNG
in  Data Format  of the Settings dialog box.
Resolution
Settings Dialog Box
Check 2
 Set the display size to 100 %.
Some applications do not display images clearly if the display size is too small.
Check 3  If moire (stripe pattern) appears, take the following measures and scan again.
•
Set one of the following settings in the  Settings (Document Scan) dialog box,...

Scanned Image Is Surrounded by Extra White Areas
Check Specify the scan area.
Click 
 (Auto Crop) in whole image view of ScanGear (scanner driver) to automatically display the cropping
frame (scan area) according to the item size.
You can also manually specify the scan area in thumbnail view or when there are white margins along the item
(for example, in photos), or when you want to create custom cropping frames.
Adjusting Cropping Frames in the Image Stitch Window
Note
•
Refer to "Adjusting Cropping...

Cannot Scan at the Correct Size
Check Make sure that the items are placed correctly.
Placing Items (When Scanning from a Computer)
790