Home > Canon > Printer > Canon printer PIXMA MG2924 User Manual

Canon printer PIXMA MG2924 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MG2924 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 735
    							1688Cause
    The ink has run out.
    Action
    Replace the ink cartridge and close the cover.
    If printing is in progress and you want to continue printing, press the machine's  Stop button for at least 5
    seconds with the ink cartridge installed. Then printing can continue under the ink out condition.
    The function for detecting the remaining ink level will be disabled.
    Replace the empty ink cartridge immediately after the printing. The resulting print quality is not
    satisfactory, if printing is continued under the ink out condition.691 
    						
    							168ACauseThe FINE cartridge is not installed properly, or the FINE cartridge not compatible with this machine isinstalled.
    Action Retract the output tray extension and the paper output tray, open the cover, then remove the FINEcartridges.
    Make sure that the FINE cartridge compatible with the machine is installed.
    Then install the FINE cartridges again. Push up the FINE cartridge until it clicks into place.
    After installing, close the cover.
    692 
    						
    							1700Cause
    The ink absorber is almost full.
    Action Press the machine's  Black or Color  button to continue printing. Contact the service center.693 
    						
    							1701Cause
    The ink absorber is almost full.
    Action Press the machine's  Black or Color  button to continue printing. Contact the service center.694 
    						
    							1890Cause
    The protective material for the FINE cartridge holder or the tape may remain attached to the holder.
    Action Make sure that the protective material or the tape does not remain attached to the FINE cartridge holder.
    If you find the protective material or the tape remains attached, retract the output tray extension and the
    paper output tray to remove the protective material or the tape.
    Pull down the tape to remove the protective material.
    If the cover is open, close it.
    If the problem is not resolved, contact the service center.
    695 
    						
    							2900Cause
    Scanning the print head alignment sheet has failed.
    Action Press the machine's  Black or Color  button to dismiss the error. Check the following points, perform
    Automatic Print Head Alignment again.•
    Make sure that the print head alignment sheet is set in the correct position and orientation on the platen glass.
    •
    Make sure the platen glass and the print head alignment sheet are not dirty.
    •
    Make sure the type and size of loaded paper is suitable for Automatic Print Head Alignment.
    For Automatic Print Head Alignment, always load one sheet of A4 or Letter-sized plain paper.
    •
    Make sure if print head nozzles are clogged.
    Print the nozzle check pattern to check the status of the print head.
    If the error is not resolved, perform Manual Print Head Alignment.
    696 
    						
    							2901Cause
    Printing of the print head alignment pattern is complete and the machine is in waiting for scanning the
    sheet.
    Action
    Proceed to scan the printed alignment pattern.1.
    Load the print head alignment sheet on the platen glass.
    Load the print head alignment sheet with the printed side facing down and align the mark 
     on the
    upper left corner of the sheet with the alignment mark 
    .
    2.
    Close the document cover gently, then press the machine's  Black or Color  button.
    The machine starts scanning the print head alignment sheet, and the print head position will be
    adjusted automatically.
    697 
    						
    							4100Cause
    The specified data cannot be printed.
    Action When you print the contents on CREATIVE PARK PREMIUM, confirm the message on the computer
    screen, make sure that genuine Canon FINE cartridges are all installed properly, then start printing again.698 
    						
    							4102Cause
    The media type and paper size are not set correctly.
    Action Press the machine's  Stop button to cancel printing, change the media type or paper size setting, then
    print again.•
    When the media type is set to  Photo Paper Plus Glossy II:
    Set the paper size to  4"x6" 10x15cm (Windows)/4 x 6 (Mac), or  5"x7" 13x18cm  (Windows)/5 x 7
    (Mac).
    •
    When the media type is set to  Glossy Photo Paper:
    Set the paper size to  4"x6" 10x15cm (Windows)/4 x 6 (Mac).
    •
    When the media type is set to  Envelope:
    Set the paper size to  Envelope Com 10 (Windows)/Envelope #10  (Mac) or Envelope DL  (Windows/
    Mac).
    699 
    						
    							4103Cause
    Cannot perform printing with the current print settings.
    Action Press the machine's  Stop button to cancel printing.
    Then change the print settings and print again.700 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA MG2924 User Manual