Canon printer PIXMA MG2924 User Manual
Have a look at the manual Canon printer PIXMA MG2924 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Network Information ScreenDisplay the network information that is set for the printers and the computers. To display the Network Information screen, select Network Information from the View menu.1. OK Returns to the Canon IJ Network Tool screen. 2. Copy All Information All network information displayed is copied to the clipboard. 221
Access Control Sheet Note • This screen is not available depending on the printer you are using. You can register the MAC addresses or the IP addresses of computers or network devices to allow access. To display the Access Control sheet, click the Access Control tab on the Configuration screen. 1. Printer Access Control Type: Select the type of access control with which to limit access of computers or network devices to the printer over a network. The setting items may differ depending on the choice of access control methods. When Selecting MAC address When Selecting IP address When Selecting MAC address The accessible computers or network devices are specified by their MAC addresses. Computers or network devices whose MAC addresses appear on the list are allowed access. 222
1.Enable printer access control(MAC address) Select to enable access control to the printer by MAC address. Note • The two types of access control (i.e., by MAC address and by IP address) can be enabled at the same time. An access control type is enabled as long as the Enable printer access control check box is selected, regardless of the type currently displayed by selecting in Printer Access Control Type: . • When both access control types are enabled at the same time, a computer or a network device whose address is registered to either list will be allowed access to the printer. 2. Accessible MAC Addresses: Shows the registered MAC addresses and any comments. 3. Edit... The Edit Accessible MAC Address screen is displayed to edit the settings selected in Accessible MAC Addresses: . Edit Accessible MAC Address Screen/Add Accessible MAC Address Screen 4. Add... The Add Accessible MAC Address screen is displayed to register the MAC address of a computer or a network device from which to access the printer over the network. Important • Add the MAC address of all computers or network devices within the network from which to access the printer. The printer cannot be accessed from a computer or a network device that is not on the list. 5. Delete Deletes the selected MAC address from the list. When Selecting IP address The accessible computers or network devices are specified by their IP addresses. Computers or network devices whose IP addresses appear on the list are allowed access. 223
1. Enable printer access control(IP address) Select to enable access control to the printer by IP address. Note • The two types of access control (i.e., by MAC address and by IP address) can be enabled at the same time. An access control type is enabled as long as the Enable printer access control check box is selected, regardless of the type currently displayed by selecting in Printer Access Control Type: . • When both access control types are enabled at the same time, a computer or a network device whose address is registered to either list will be allowed access to the printer. 2. Accessible IP Addresses: Shows the registered IP addresses and any comments. 3. Edit... The Edit Accessible IP Address screen is displayed to edit the settings selected in Accessible IP Addresses: . Edit Accessible IP Address Screen/Add Accessible IP Address Screen 4. Add... The Add Accessible IP Address screen is displayed to register the IP address of a computer or a network device from which to access the printer over the network. Important • Add the IP address of all computers or network devices within the network from which to access the printer. The printer cannot be accessed from a computer or a network device that is not on the list. • Up to 16 IP addresses can be registered. IP addresses specified by Range Specification are counted as one address. Use Range Specification when you intend to register 17 or more IP addresses. 224
5.Delete Deletes the selected IP address from the list. 225
Edit Accessible MAC Address Screen/Add Accessible MAC Address Screen Note • This screen is not available depending on the printer you are using. The example screenshots in this section refer to the Add Accessible MAC Address Screen. 1. MAC Address: Enter the MAC address of a computer or a network device to allow access. 2. Comment: Optionally enter any information to identify the device, such as the name of the computer. Important • Comments will be displayed only on the computer used to enter them. 226
Edit Accessible IP Address Screen/Add Accessible IP Address Screen Note • This screen is not available depending on the printer you are using. The example screenshots in this section refer to the Add Accessible IP Address Screen. 1. Specification Method: Select either Single Address Specification or Range Specification to add the IP address(es). Single Address Specification Specify each IP address separately. Range Specification Specify a range of successive IP addresses. 2. IP Address: Enter the IP address of a computer or a network device to allow access when you selected Single Address Specification in Specification Method: . An IP address is expressed as four values ranging from 0 to 255. Start IP Address: Enter the first IP address in the range of addresses of the computers or network devices to allowaccess when you selected Range Specification in Specification Method: . An IP address is expressed as four values ranging from 0 to 255. End IP Address: Enter the last IP address in the range of addresses of the computers or network devices to allowaccess when you selected Range Specification in Specification Method: . An IP address is expressed as four values ranging from 0 to 255. Note • The Start IP Address: must be a smaller value than the End IP Address:. 3. Comment: Optionally enter any information to identify the device, such as the name of the computer. Important • Comments will be displayed only on the computer used to enter them. 227
Other Screens of IJ Network Tool Canon IJ Network Tool Screen Status Screen Connection Performance Measurement Screen Maintenance Screen Network Setup of the Card Slot Screen Associate Port Screen Network Information Screen 228
Canon IJ Network Tool ScreenThis section describes the items and menus displayed on the Canon IJ Network Tool screen. Items on the Canon IJ Network Tool Screen Canon IJ Network Tool Menus Items on the Canon IJ Network Tool ScreenThe following item is displayed on the Canon IJ Network Tool screen. 1. Printers: The printer name, status, printer model name, and port name are displayed. A check mark next to the printer in the Name list indicates it is set as the default printer. Configuration changes are applied to the selected printer. 2. Update Performs printer detection again. Click this button if the target printer is not displayed. Important • To change the printer's network settings using IJ Network Tool, it must be connected via a LAN. • If No Driver is displayed for the name, associate the port with the printer. When the Printer Driver Is Not Associated with a Port • If Not Found is displayed for the status, check the followings: • The access point is turned on. • When using wired LAN, the LAN cable is connected properly. • If the printer on a network is not detected, make sure that the printer is turned on, then click Update . It may take several minutes to detect printers. If the printer is not yet detected, connect the machine and the computer with a USB cable, then click Update. • If the printer is being used from another computer, a screen is displayed informing you of this condition. 229
Note• This item has the same function as Refresh in the View menu. 3. Configuration... Click to configure settings of the selected printer. Configuration Screen Note • You cannot configure a printer that has the status Not Found. • This item has the same function as Configuration... in the Settings menu. Canon IJ Network Tool Menus The following menu is displayed from the Canon IJ Network Tool screen. 1. File menu Exit Exits IJ Network Tool. 2. View menu Status Displays the Status screen to confirm the printer connection status and wireless communication status. In the access point mode, this item is grayed out and you cannot confirm the printer connection status. Status Screen Refresh Updates and displays the contents of Printers: on the Canon IJ Network Tool screen to the latest information. Important • To change the printer's network settings using IJ Network Tool, it must be connected via a LAN. 230