Canon printer PIXMA MG2924 User Manual

							Basic Mode TabThis mode allows you to scan easily by following the on-screen steps.This section describes the settings and functions available on the  Basic Mode tab.
(1) Settings and Operation Buttons
(2) Toolbar
(3) Preview Area
Note
•
The displayed items vary by document type and view.
•
The preview function is not available when scanning from the ADF (Auto Document Feeder).
(1) Settings and Operation Buttons Select Source Photo (Color) Scan color photos.
Magazine (Color) Scan color magazines.
Document (Color) Scan documents in color.
Document (Grayscale) Scan documents in black and white.
Document (Color) ADF Simplex Scan documents from the ADF in color.
Document (Grayscale) ADF Simplex Scan documents from the ADF in black and white.
Document (Color) ADF Duplex (only for models supporting ADF duplex scanning) Scan both sides of documents from the ADF in color.
Document (Grayscale) ADF Duplex (only for models supporting ADF duplex scanning) Scan both sides of documents from the ADF in black and white.
511 
						

							Important•
Some applications do not support continuous scanning from the ADF. For details, refer to theapplication's manual.
Note
•
When you select a document type, the unsharp mask function will be active.
•
When you select an option other than the ADF types, the image adjustment function which
adjusts images based on the document type will also be active.
•
If you select  Magazine (Color) , the descreen function will be active.
Display Preview Image PreviewPerforms a trial scan.
Note
•
When using the machine for the first time, scanner calibration starts automatically. Wait a
while until the preview image appears.
Destination Select what you want to do with the scanned image.
Print Select this to print the scanned image on a printer.
Image display Select this to view the scanned image on a monitor.
OCR Select this to use the scanned image with OCR software.
"OCR software" is software that converts text scanned as an image into text data that can be edited in word processors and other programs.
Output Size Select an output size.
Output size options vary by the item selected in  Destination.
512 
						

							FlexibleAllows you to freely adjust the cropping frames (scan areas).
In thumbnail view: Drag the mouse over a thumbnail to display a cropping frame. When a cropping frame is
displayed, the portion within the cropping frame will be scanned. When no cropping frame is
displayed, each frame is scanned individually.
In whole image view:
When no cropping frame is displayed, the entire Preview area will be scanned. When a cropping
frame is displayed, the portion within the cropping frame will be scanned.
Paper Size (L, A4, etc.) Select an output paper size. The portion within the cropping frame will be scanned at the size ofthe selected paper size. You can drag the cropping frame to enlarge/reduce it while maintaining
the aspect ratio.
Monitor Size (1024 x 768 pixels, etc.) Select an output size in pixels. A cropping frame of the selected monitor size will be displayed
and the portion within the cropping frame will be scanned. You can drag the cropping frame to
enlarge/reduce it while maintaining the aspect ratio.
Add/Delete... Opens the  Add/Delete the Output Size  dialog box, in which you can specify custom output
sizes. You can select this option when  Destination is Print  or Image display .
In the Add/Delete the Output Size  dialog box, you can specify multiple output sizes and save
them at one time. Saved items will be registered to the  Output Size list and can be selected,
along with the predefined items.
Adding:
Enter  Output Size Name , Width , and Height , then click  Add. For  Unit, you can select  inches or
mm  when  Destination  is Print  but you can only select  pixels when  Destination  is Image
display . The name of the added size appears in  Output Size List. Click Save to save the items
listed in  Output Size List .
Deleting:
Select the output size you want to delete in  Output Size List, then click Delete. Click Save to
save the items listed in  Output Size List.
Important
•
You cannot delete predefined output sizes such as  A4 and  1024 x 768 pixels .
513 
						

							Note•
Save up to 10 items.
•
An error message appears when you enter a value outside the setting range. Enter a value
within the setting range.
Note
•
For details on whether or how the cropping frame is initially displayed on a preview image, refer to  Cropping Frame on Previewed Images  in "
Preview Tab" (Preferences  dialog box).
 Invert aspect ratio
Available when  Output Size is set to anything but  Flexible.
Click this button to rotate the cropping frame. Click again to return it to the original orientation.
Adjust cropping frames You can adjust the scan area within the Preview area.
If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area
is specified, only the portion in the cropping frame will be scanned.
Adjusting Cropping Frames (ScanGear)
Image corrections Allows you to apply corrections to images.
Important
•
Apply Auto Document Fix  and Correct fading  are available when  Recommended is selected
on the  Color Settings  tab of the Preferences  dialog box.
Note
•
Available functions vary by the document type selected in  Select Source.
Apply Auto Document Fix Sharpens text in a document or magazine for better readability.
Important
•
Scanning may take longer than usual when this checkbox is selected.
•
The color tone may change from the source image due to corrections. In that case, deselect
the checkbox and scan.
•
Correction may not be applied properly if the scan area is too small.
Correct fading Corrects and scans photos that have faded with time or have a colorcast.
Reduce gutter shadow Corrects shadows that appear between pages when scanning open booklets.
Important
•
For precautions on using this function, refer to "Gutter Shadow Correction ."
Color Pattern... Allows you to adjust the image's overall color. You can correct colors that have faded due to
colorcast, etc. and reproduce natural colors while previewing color changes.
Adjusting Colors Using a Color Pattern
514 
						

							Important•
This setting is not available when you select Color Matching on the Color Settings  tab of
the  Preferences  dialog box.
Perform Scan Scan Starts scanning.
Note
•
When scanning starts, the progress will be displayed. Click  Cancel to cancel the scan.
Preferences... Opens the 
Preferences dialog box  in which you can make scan/preview settings.
Close Closes ScanGear (scanner driver).
(2) Toolbar
You can adjust or rotate preview images. The buttons displayed on the Toolbar vary by view.
In thumbnail view:
In whole image view:
 (Thumbnail) /  (Whole Image)
Switches the view in the Preview area.
(3) Preview Area
 (Rotate Left)
Rotates the preview image 90 degrees counter-clockwise.
•
The result will be reflected in the scanned image.
•
The image returns to its original state when you preview again.
 (Rotate Right)
Rotates the preview image 90 degrees clockwise.
•
The result will be reflected in the scanned image.
•
The image returns to its original state when you preview again.
 (Auto Crop)
Displays and adjusts the cropping frame automatically to the size of the document displayed in the Preview area. The scan area is reduced every time you click this button if there are croppable areas
within the cropping frame.
515 
						

							 (Check All Frames)
Available when two or more frames are displayed.
Selects the checkboxes of the image in thumbnail view.
 (Uncheck All Frames)
Available when two or more frames are displayed.
Deselects the checkboxes of the image in thumbnail view.
 (Select All Frames)
Available when two or more frames are displayed.
Selects the images in thumbnail view and outlines them in blue.
 (Select All Cropping Frames)
Available when two or more cropping frames are specified.
Turns the cropping frames into thick broken lines and applies the settings to all of them.
 (Remove Cropping Frame)
Removes the selected cropping frame.
 (Information)
Displays the version of ScanGear and the current scan settings (document type, etc.).
 (Open Guide)
Opens this page.
(3) Preview Area This is where a trial image appears after you click  Preview. You can also check the results of the settings
(image corrections, color adjustments, etc.) made in "
(1) Settings and Operation Buttons ."
When 
 (Thumbnail) is displayed on the Toolbar:
Cropping frames are specified according to the document size, and thumbnails of scanned images are
displayed. Only the images with the checkbox selected will be scanned.
516 
						

							Note
•
When multiple images are previewed, different outlines indicate different selection status.
•
Focus Frame (thick blue outline): The displayed settings will be applied.
•
Selected Frame (thin blue outline): The settings will be applied to the Focus Frame and Selected
Frames simultaneously. You can select multiple images by clicking them while pressing the Ctrl
key.
•
Unselected (no outline): The settings will not be applied.
•
Double-click a frame to zoom in on the image. Click  (Frame Advance) at the bottom of the
screen to display the previous or next frame. Double-click the frame again to return the display to its
non-magnified state.
When 
 (Whole Image) is displayed on the Toolbar:
Items on the Platen are scanned and displayed as a single image. All portions in the cropping frames will be scanned.
Note
•
You can specify the cropping frame on the displayed image. In thumbnail view, you can only createone cropping frame per image. In whole image view, you can create multiple cropping frames.
Adjusting Cropping Frames (ScanGear)
517 
						

							Related Topic
Scanning in Basic Mode
518 
						

							Advanced Mode TabThis mode allows you to make advanced scan settings such as the color mode, output resolution, image
brightness, and color tone.
This section describes the settings and functions available on the  Advanced Mode tab.
(1) Settings and Operation Buttons
(2) Toolbar
(3) Preview Area
Note
•
The displayed items vary by document type and view.
•
The preview function is not available when scanning from the ADF (Auto Document Feeder).
(1) Settings and Operation Buttons Favorite Settings You can name and save a group of settings (Input Settings, Output Settings, Image Settings, and
Color Adjustment Buttons) on the  Advanced Mode tab, and load it as required. It is convenient to
save a group of settings if you will be using it repeatedly. You can also use this to reload the default
settings.
Select  Add/Delete...  from the pull-down menu to open the  Add/Delete Favorite Settings dialog box.
519 
						

							Enter Setting Name  and click Add; the name appears in  Favorite Settings List .
When you click  Save, the item appears in the  Favorite Settings list and can be selected, along with
the predefined items.
To delete an item, select it in  Favorite Settings List and click Delete. Click Save to save the settings
displayed in  Favorite Settings List .
Note
•
You can set Add/Delete...  in Favorite Settings  after preview.
•
Save up to 10 items.
Input Settings
Specify the input settings such as the document type and size.
Output SettingsSpecify the output settings such as the output resolution and size.
Image SettingsEnable/disable various image correction functions.
Color Adjustment ButtonsFine corrections to the image brightness and color tones can be made including adjustments to theimage's overall brightness or contrast and adjustments to its highlight and shadow values (histogram)
or balance (tone curve).
Zoom Zooms in on a frame, or zooms in on the image in the area specified with a cropping frame (scan
area). When zoomed in,  Zoom changes to  Undo. Click  Undo to return the display to its non-
magnified state.
In thumbnail view: When multiple images are displayed in thumbnail view, clicking this button zooms in on the selected
frame. Click 
 (Frame Advance) at the bottom of the screen to display the previous or next
frame.
Note
•
You can also zoom in on an image by double-clicking the frame. Double-click the frame again to return the display to its non-magnified state.
In whole image view:
Rescans the image in the area specified with a cropping frame at higher magnification.
Note
•
Zoom  rescans the document and displays high-resolution image in Preview.
•
 (Enlarge/Reduce) on the Toolbar zooms in on the preview image quickly. However, the
resolution of the displayed image will be low.
Preview Performs a trial scan.
520