Canon printer MAXIFY MB2320 User Manual

Scan TabOn the  Scan tab, you can specify the following settings.
Status of ScanGear dialog after scanning
Select what to do with ScanGear (scanner driver) after scanning images.
Close ScanGear automatically Select this to return to the original application when scanning is completed.
Do not close ScanGear automatically Select this to return to the ScanGear screen for another scan when scanning is completed.
Display the dialog to select next action Select this to open a screen and select what to do when...

Color Settings TabOn the  Color Settings  tab, you can specify the following settings.
Color Adjustment
Select one of the following.
Recommended Select this to vividly reproduce the tone of a document on the screen. It is recommended that you
normally select this setting.
Color Matching Select this to automatically match the scanner, monitor, and color printer colors, thus reducing time andtrouble to manually match the monitor and printer colors.
Source(Scanner) Select scanner profile.
Target Select...

Note•
Depending on your scanner or printer, this setting may not be available when scanning from the ADF
(Auto Document Feeder).
•
You can select one when  Color Mode is Color  or Grayscale .
•
Color Matching is available when ScanGear, monitor, color management-compliant application (such as
Adobe Photoshop), and printer are set up correctly.
Refer to the corresponding manual for the monitor, printer, and application settings.
Monitor Gamma By setting the gamma value of a monitor, you can adjust the...

Placing Items (When Scanning from a Computer)Learn how to place items on the platen or ADF (Auto Document Feeder) of your scanner or printer. Placeitems correctly according to the type of item to be scanned. Otherwise, items may not be scanned correctly.
Important
•
Do not place objects on the document cover. When you open the document cover, the objects may fallinto your scanner or printer, resulting in malfunction.
•
Close the document cover when scanning.
•
Do not touch the operation panel buttons or...

the platen may be saved as PDF files. To save in a
format other than PDF, scan by specifying the data
format.
Placing Multiple Items:
Allow 0.4 inch (1 cm) or more space between the edges
(diagonally striped area) of the platen and items, and
between items. Portions placed on the diagonally striped
area cannot be scanned.
 more than 0.4 inch (1 cm)
Note
•
You can place up to 12 items.
•
You can place up to four items when the  Compress
scanned images upon transfer  checkbox is selected
in the Settings...

2.Place the documents on the ADF, then adjust the document guides to the width of the
documents.
Insert the documents face-up until a beep sounds.
Note
•
When scanning duplex documents, place the front sides facing up. They will not be scanned in
the correct page order if placed the other way around.
726 

Adjusting Cropping Frames (ScanGear)"Cropping" is the act of selecting the area you want to keep in an image and discarding the rest when
scanning it.
On the  Basic Mode  tab and Advanced Mode  tab, you can specify cropping frames (scan areas) on the
image(s) displayed in the Preview area of the screen.
When you perform a scan, each area specified with a cropping frame will be scanned as a separate image.
Note
•
In whole image view, you can specify multiple cropping frames on the preview image....

In whole image view:
Represents an unselected cropping frame. The settings on the  Basic Mode tab or Advanced Mode
tab will not be applied.
Adjusting a Cropping Frame
The cursor will change into 
 (Arrow) when it is positioned over a cropping frame. If you
click and drag the mouse in the direction of the arrow, the cropping frame will expand or contract
accordingly.
The cursor will change into  (Crosshair Arrow) when it is positioned within a cropping frame. Click and
drag the mouse to move the entire...

In whole image view:
Click and drag the mouse in a space outside the existing cropping frame to create a new cropping frame
in the Preview area. The new cropping frame will be the active cropping frame, and the old cropping frame
will be the unselected cropping frame.
You can create multiple cropping frames and apply different scan settings to each cropping frame.
You can also select multiple cropping frames by clicking them while pressing the Ctrl key.
If you select multiple cropping frames and change...

In whole image view:
To delete a cropping frame, select it and click 
 (Remove Cropping Frame) on the Toolbar.
Alternatively, press the Delete key.
When there are multiple cropping frames, all the selected cropping frames (active cropping frame and
selected cropping frames) are deleted simultaneously.
730