Canon printer MAXIFY MB2320 User Manual

Input Settings
Input Settings allows you to set the following items:
Select Source The type of document to be scanned is displayed. To scan from the Platen, select  Platen; to scan from
the ADF (Auto Document Feeder), select  Document (ADF Simplex) or Document (ADF Duplex) .
Important
•
Some applications do not support continuous scanning from the ADF. For details, refer to the
application's manual.
Note
•
You can select  Document (ADF Duplex)  when using a model supporting ADF duplex scanning.
Paper...

Click Settings...  to open the  Orientation dialog box.
Important
•
The Orientation  dialog box can only be opened when  Select Source is Document (ADF
Simplex)  or Document (ADF Duplex) .
•
Binding Location is displayed when using a model supporting ADF duplex scanning.
•
Binding Location cannot be specified when  Select Source is Document (ADF Simplex) .
Color Mode Select how to scan the document.
Color Select this mode to scan color documents or to create color images. This mode renders the image
in...

Note•
The values you can enter will be within the range of the selected document size. The minimum size
is 96 pixels x 96 pixels when  Output Resolution is 600 dpi, scaled at 100 %.
•
When Auto Crop is performed in whole image view, the aspect ratio will not be maintained since
the size will be prioritized.
•
Refer to "Adjusting Cropping Frames (ScanGear) " for details on cropping frames.
703 

Output Settings
Output Settings allows you to set the following items:
Output Resolution Select the resolution to scan at.
The higher the resolution (value), the more detail in your image. Select a resolution from the options displayed by clicking the button, or enter a value in 1 dpiincrements.
Refer to "Resolution" for your model from Home of the  Online Manual for details.
When Select Source is Platen:
You can enter a value within the range of 25 dpi to 19200 dpi.
When Select Source is...

In whole image view:
When no cropping frame is displayed, the entire Preview area will be scanned. When a cropping
frame is displayed, the portion within the cropping frame will be scanned.
Note
•
To enlarge/reduce the scanned image, enter values into  (Width) and  (Height) in
Output Settings  or specify a value (by 1 %) for  %. Although the maximum value available for
%  depends on the  Output Resolution , it can be specified for up to 19200 dpi (the maximum
available output resolution).
Paper Size (L,...

Note•
Refer to "Adjusting Cropping Frames (ScanGear)" for details on cropping frames.
•
For details on whether or how the cropping frame is initially displayed on a preview image, refer to
Cropping Frame on Previewed Images  in "
Preview Tab" (Preferences  dialog box).
 (Switch Aspect Ratio)
Available when  Output Size is set to anything but  Flexible.
Click this button to rotate the cropping frame. Click again to return it to the original orientation.
Data Size The data size when scanned...

Image Settings
Important
•
Do not apply these functions to images without moire, dust/scratches, or faded colors. The color tone
may be adversely affected.
•
Image correction results may not be reflected in the preview image.
Note
•
Selectable settings depend on  Color Mode settings.
•
Scanning may take longer than usual when you use  Image Settings.
Image Settings  allows you to set the following items:
Image Adjustment When Image Adjustment is set, the brightness of the specified portion of the image...

Important•
You can set Image Adjustment  after preview.
•
You can set this setting when  Recommended is selected on the  Color Settings tab of the
Preferences  dialog box.
Note
•
If the image is not adjusted properly with  Auto, specify the document type.
•
The color tone may change from the source image due to the Image Adjustment. In that case, set
Image Adjustment  to None .
Reduce Show-through Use this function to reduce show-through in duplex documents or lighten the base color in recycled
paper and...

LowSelect this to reduce small dust particles and scratches. Large ones may remain.
Medium It is recommended that you normally select this setting.
High Select this to reduce large dust particles and scratches; however, evidence of the reduction
process may remain or delicate parts of the image may be removed.
Important
•
This function may not be effective for some types of photos.
Note
•
It is recommended that you select  None when scanning printed materials.
Fading Correction Use this function to...

Gutter Shadow CorrectionUse this function to correct shadows that appear between pages when scanning open booklets.
When you set the  Gutter Shadow Correction  setting in the preview image, the result will be reflected.
Preview the effects before scanning, as results vary depending on the type of document and how it is
pressed.
Unclear or blurred text/lines caused by curved pages are not corrected.
None Gutter shadow will not be corrected.
Low Select this when the effect level is too strong with the...