Home > Canon > Printer > Canon printer MAXIFY MB2120 User Manual

Canon printer MAXIFY MB2120 User Manual

Here you can view all the pages of manual Canon printer MAXIFY MB2120 User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 1191

5.
Close document feeder cover and turn on printer.
When rescanning the document after clearing the error, rescan it from the first page.
If you cannot remove the document or the document tears inside the printer, or if the document jam error continues after removing the document, contact your nearest Canon service center to request a
repair.
Note

Page 1192

OtherCasesCheck the following:
Check1  Is anything blocking paper output slot?
Check2 Is rear cover attached properly?
Check3 Is paper curled?
Correct curl before loading paper.
1192 

Page 1193

1003Cause
Possible causes include the following.

Page 1194

1200Cause
Front cover is open.
WhattoDo Close the front cover and wait for a while.
Do not close it while you are replacing an ink tank.
1194 

Page 1195

1309Cause
Paper size that is not compatible with automatic duplex printing is specified.
WhattoDo
The sizes of media suitable for auto duplex printing are A4 and Letter.
Press the printer's  Stop button to cancel printing.
Then change the print settings and retry printing.
1195 

Page 1196

1310Cause
Size of paper may not be compatible with automatic duplex printing.
WhattoDo
The sizes of media suitable for auto duplex printing are A4 and Letter. Make sure paper of the correct size is loaded. Press the  OK button to eject the paper and restart printing from the front of the next piece of
paper. The reverse side of the ejected sheet is not printed.
1196 

Page 1197

1319Cause
Size of paper is not compatible with automatic duplex printing.
WhattoDo The sizes of media suitable for auto duplex printing are A4 and Letter.Press the printer's  Stop button to cancel printing.
Then change the print settings and retry printing.
1197 

Page 1198

1575Cause
Ink cannot be correctly detected.
WhattoDo If an ink tank becomes empty, replace it.
An ink tank cannot be replaced until it becomes empty.
Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.
1198 

Page 1199

1600Cause
Ink may have run out.
WhattoDo Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, press the machine's  OK button with the ink
tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The
machine may be damaged if printing is continued under the ink out condition.
Since the information contained in the fax may be lost if it is printed in this condition, the received fax will
not be printed and...

Page 1200

1660Cause
An ink tank is not installed.
WhattoDo Install the ink tank.
1200 
Start reading Canon printer MAXIFY MB2120 User Manual

Related Manuals for Canon printer MAXIFY MB2120 User Manual

All Canon manuals