Home > Canon > Printer > Canon printer MAXIFY MB2120 User Manual

Canon printer MAXIFY MB2120 User Manual

Here you can view all the pages of manual Canon printer MAXIFY MB2120 User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 1161

AMessageforFaxingIsDisplayedonFaxStandbyScreen
If a message is displayed on the Fax standby screen, take the corresponding action described below.
MessageActionAutore-
dialThe printer is waiting to redial the recipient's number because the line was busy or the recipient did not answer when you tried to send a document. Wait for the printer to automatically redial the number. If you want to cancel automatic redialing, wait until the printer starts dialing the number, and then press the...

Page 1162

Set Printwhenoutofink  in Autoprintsettings  under FAXsettings  to Print .
However, part or all of the fax may not be printed since the ink has run out. Also, the contents of the fax will not be stored in the printer's memory.If the ink has already run out, we recommend that  Donotprint be selected for  Receiveddocu-
ments  in Autoprintsettings  under FAXsettings  to store the received fax in the printer's mem-
ory. After you replace the ink tank and select  Print for...

Page 1163

Memory
isfull.The printer's memory is full because it has sent/received too many documents, or a detailed document.
Print the faxes stored in the printer's memory or save them on the USB flash drive, and delete them from the printer's memory.
Document Stored in Printer's Memory
When sending a fax, resend it. If this message still appears, delete the faxes stored in the printer's memo- ry, divide the faxes for sending, and send them again.
When receiving a fax, have the sender resend...

Page 1164

MessageAppearsThis section describes some of the errors and messages that may appear.
Note

Page 1165


				            

Page 1166

Check See Automatic Duplex Printing Problems  and take the appropriate action.
ErrorRegardingPowerCordBeingUnpluggedIsDisplayed
(Windows)
The printer may have been unplugged while it was on.
Check the error message that appears on the computer and click  OK.
The printer starts printing.
See 
Unplugging the Machine  for unplugging the power cord.
Important

Page 1167


				            

Page 1168

OtherErrorMessages(Windows)
Check If an error message appears outside printer status monitor, check the
following:

Page 1169


				            

Page 1170

Note
Start reading Canon printer MAXIFY MB2120 User Manual

Related Manuals for Canon printer MAXIFY MB2120 User Manual

All Canon manuals