Canon printer MAXIFY MB2120 User Manual

CannotPerformSequentialBroadcastingbyRedialing,orCannotDialbyEnteringNumbers
Check  Have you already selected recipient from redial history, or already dialed a
number by entering the fax/telephone numbers?
You can dial one recipient by selecting from the redial history or by entering the fax/telephone numbers as the recipient of sequential broadcasting.
If you already have dialed by selecting from the redial history or by entering the fax/telephone numbers, select the recipient from the...

ErrorsOftenOccurWhenYouSendaFax
Check Check telephone line condition or connection.
If the telephone line or connection is poor, reducing the transmission start speed may correct the error.
Reduce the transmission start speed on  TXstartspeed in Adv.communicationsettings  in AdvancedFAX
settings  under FAXsettings .
FAX settings
1132 

ProblemsReceivingFaxes
CannotReceiveaFax,CannotPrintaFax
PrinterDoesNotSwitchAutomaticallybetweenVoiceandFaxCalls
QualityofReceivedFaxisPoor
CannotReceiveaColorFax
ErrorsOftenOccurWhenYouReceiveaFax
1133 

CannotReceiveaFax,CannotPrintaFax
Check1 Is the power turned on?

Connecting Telephone Line
Check5 Is a different size of paper from that specified by  Pagesize in FAXpaper
settings  loaded?
If a different size of paper from that specified by  Pagesize is loaded for printing faxes, the received faxes will not
be printed and will be stored in the printer's memory (Memory Reception). Load the same size of paper as that
specified by  Pagesize, and then press the  OK button.
Check6
 Is paper loaded?
If paper is not loaded, received faxes will be stored in the...

If you select Reject for any setting items in  Callerrejection in Securitycontrol  under FAXsettings , the printer
rejects calls for setting item selected  Reject.
For details on how to set, see 
Using Caller ID Service to Reject Calls .1136 

PrinterDoesNotSwitchAutomaticallybetweenVoiceandFax
Calls
Check  Is receive mode set to  FAXonlymode?
If  FAXonlymode  is selected for Receivemodesettings , there will be no automatic switching between voice
and fax calls.
Set the receive mode to  TELprioritymode, DRPD *1, or Networkswitch *2.
If the receive mode is  TELprioritymode and an answering machine is connected to the printer, check whether
a proper message is played back when the answering machine answers.
Setting Receive...

QualityofReceivedFaxisPoor
Check1 Check scan settings of sender's fax device.
Ask the sender to adjust the scan settings of the fax device.
Check2  Is ECMRX  set to OFF?
Select  ON for  ECMRX  in Adv.communicationsettings  in AdvancedFAXsettings  under FAXsettings .
If  ECMRX  is enabled, the sender's fax device resends the fax after correcting errors automatically.
FAX settings
Check3
 Is sender's original document or scanning area of sender's fax device dirty?
The image...

CannotReceiveaColorFax
Check Is ECMRX  set to OFF?
If  OFF  is select for  ECMRX in Adv.communicationsettings  in AdvancedFAXsettings  under FAXsettings ,
the printer cannot receive color faxes. The printer will disconnect the telephone line or receive color faxes in
black & white according to the setting of the sender's fax device.
Set  ECMRX  to ON .
FAX settings
1139 

ErrorsOftenOccurWhenYouReceiveaFax
Check1 Check telephone line condition or connection.
If the telephone line or connection is poor, reducing the reception start speed may correct the error.
Reduce the reception start speed on  RXstartspeed in Adv.communicationsettings  in AdvancedFAX
settings  under FAXsettings .
FAX settings
Check2
 Is sender's fax device operating normally?
Contact the sender and ask the sender to check whether the fax device is operating normally.
1140