Canon printer MAXIFY MB2020 User Manual

The confirmation screen is displayed, then the  icon appears as the Quiet setting menu
icon.
Important
•
Operating speed may be reduced compared to when the quiet mode is not selected.
•
This function may not be so effective depending on the machine's setting. Furthermore, certain
noise, such as when the machine is preparing for printing, is not reduced.
Note
•
You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner driver). No matter how you set...

Using the Machine with the Access Point ModeBy using the machine as an access point in an environment that does not have wireless LAN router or
access point, or by using the machine as an access point temporarily in an environment that has wireless
LAN router or access point, you can connect the machine to an external device such as a computer or a
smartphone and print/scan from them.
This section describes how to enable the access point mode, the access point name of the machine, and the security...

Note•
Pressing the right Function button displays the security setting.
The password required when connecting from the external device is also displayed.
•
You can specify the access point name (SSID) and the security setting optionally.
Setting of the Access Point Mode
7.
Press the left  Function button.
The access point mode is enabled and the machine can be used as an access point.
Printing/Scanning with the Access Point Mode Print/Scan with the access point mode following the procedure below.
1....

3.Use the  button to select LAN settings, then press the  OK button.4.
Use the  button to select  Change LAN, then press the  OK button.
5.
Use the  button to select  Wireless LAN active , then press the OK button.
If you do not use the machine over wireless LAN, select  Disable LAN.
Setting of the Access Point Mode
Specify the settings for the access point mode following the procedure below.
1.
Make sure that the machine is turned on.
2.
Select   Setup  on the HOME screen.
LCD and Operation Panel
3....

Note•
If you change the access point mode setting of the machine, also change the access point setting ofthe external device such as a computer or a smartphone.275 

Registering the Favorite Settings (Custom profiles)You can register the favorite copying, scanning, or faxing settings and call them up from the HOME screen.
You can register up to 20 settings.
Registering the Setting
Calling Up the Registered Setting
Editing/Deleting the Registered setting
Registering the Setting
Press the left  Function button on each standby screen or on the screen displayed after the settings are
specified.
Copy standby screenScan standby screenFax transmission standby screen
When...

Editing/Deleting the Registered setting
Follow the procedure below to edit or delete the registered setting.1.
Make sure that the machine is turned on.
2.
Select   Custom profiles  on the HOME screen.
LCD and Operation Panel
3.
Press the left Function button.
You can change the order or name of the registered settings and delete the settings.
•
To change the order of the registered settings
1.
Use the  button to select  Rearrange, then press the  OK button.
2.
Use the  button to select the setting you...

Checking the Total Number of Uses of the MachineYou can check the total number of uses of the machine (e.g. the total number of printing, copying, sending/
receiving faxes, or scanning).1.
Make sure that the machine is turned on.
2.
Select   Records of use  on the HOME screen.
LCD and Operation Panel
The  Records of use  screen is displayed.
3.
Use the  button to select the item to check, then press the  OK button.
Total sheets used on the device Displays the total number of printing.
You can check the...

Information about Network Connection
Useful Information about Network Connection
279 

Useful Information about Network Connection
Default Values Set at Factory (Network)
Connecting the Machine to the Computer Using a USB Cable
When Detecting the Printers Have the Same Name during Setup
Connecting to Other Computer with LAN/Changing the Connection Method
from USB to LAN
Printing Out Network Setting Information
280