Canon printer imageCLASS MF249dw User Manual
Here you can view all the pages of manual Canon printer imageCLASS MF249dw User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 341
CheckingtheSSIDandNetworkKey 1469-06A When manually setting up a wireless connection, you need to specify the SSID and network key of your wireless router. The SSID and network key may be indicated on these networking devices. Check your devices and write down thenecessary information before setting up the connection. For more information, see the instruction manuals for yournetworking devices or contact your manufacturer. SSIDA name given for identifying a speci4c wireless LAN. Some other terms...
Page 342
If the above screen is not displayed Displaying the [Software Programs/Manuals Setup@ Screen(P.670) If [AutoPlay] is displayed, click [Run MInst.exe]. 3Click[Start@for[CanonMF/LBPWirelessSetup[email protected]theLicenseAgreementandclick[Yes@toagree.Network 334
Page 343
5Checktheinformationdisplayedforthewirelessrouter. Write down the necessary information. If you do not know what information is necessary, write down all the information that is displayed. Ifwirelessroutersarenotfound Click [Refresh]. If nothing happens, check that the settings are correctly con4gured on the computer and the wireless router. LINKS ConnectingtoaWirelessLAN(MF249dw/MF247dw)(P.319) SettingUpConnectionbySelectingaWirelessRouter(P.326)...
Page 344
SettingIPAddresses 1469-06C Connecting the machine to a network requires a unique network IP address. Two versions of IP addresses are available: IPv4 and IPv6. Con4gure these settings depending on the network environment. To use IPv6 addresses, you need to properly con4gure the IPv4 address settings. Network 336
Page 345
SettingIPv4Address 1469-06E The machine's IPv4 address can be either assigned automatically by a dynamic IPaddressing protocol, such as DHCP, or entered manually. When connecting the machine to a wired LAN, make sure that the connectors of the LAN cable are 4rmly inserted into the ports ( ConnectingtoaWiredLAN(P.318) ). You can test the network connection if necessary. SettingIPv4Address(P.337) TestingtheNetworkConnection(P.339) Setting IPv4 Address 1TapintheScreen.2Tap. ...
Page 346
2Tap , , or . IfyoudonotwanttouseDHCP/BOOTP/RARPtoassignanIPaddressSelect . If you select , , or when these services are unavailable, the machine will waste time and communications resources searching the network for these services. 3Check that is set to . If is selected, change the setting to .4Tap . IP addresses assigned via DHCP/BOOTP/RARP override the address obtained via Auto IP. ManuallyenteringanIPaddress 1Check that is set to . If is displayed, tap , and set both and...
Page 347
Checkingwhetherthesettingsarecorrect Make sure that the Remote UI screen can be displayed with your computer ( StartingRemoteUI(P.450) ). If a computer is not available, you can check the connection by using the operation panel ( Testingthe NetworkConnection(P.339) ). Testing the Network Connection 1TapintheScreen.2Tap. If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap . Setting theSystemManagerPIN(P.397)...
Page 348
SettingIPv6Addresses 1469-06F The IPv6 addresses of the machine can be con4gured via the Remote UI. Before setting IPv6 addresses, check the IPv4 address settings ( ViewingIPv4 Settings(P.344) ). You need to set the correct IPv4 settings to use IPv6 addresses. Note that the scan function that uses the scanner driver or MF Scan Utility is not available in an IPv6 environment. The machine can use up to nine of the following IPv6 addresses: TypeMaximum number availableDescriptionLink-local...
Page 349
4Click[Edit@in[IPv6[email protected]the[UseIPv6@checkboxandcon4guretherequiredsettings.Network 341
Page 350
[UseIPv6@ Select the check box to enable IPv6 on the machine. When not using IPv6, clear the check box. [UseStatelessAddress@Select the check box when using a stateless address. When not using a stateless address, clear the check box. [UseManualAddress@When you want to manually enter an IPv6 address, select the check box and enter the IP address, pre4x length, and default router address in the corresponding text boxes. [IPAddress@ Enter an IPv6 address. Addresses that start with "ff" (or...