Canon printer imageCLASS MF249dw User Manual
Here you can view all the pages of manual Canon printer imageCLASS MF249dw User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 381
Con4gurLngEthernetSettings 1469-072 Ethernet is a standard for communicating data in a local area network (LAN). You can set the communication mode (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX). In general, the machine can be used without changing the defaults ( EthernetDriverSettings(P.482) ), but you can change these settings to suit your network environment. 1TapintheScreen.2Tap. If a screen for entering a PIN is displayed, enter the PIN with the numeric keys...
Page 382
3Select the Ethernet type. Tap tap or . 4Tap . LINKS ChangingtheMaximumTransmissionUnit(P.375) SettingaWaitTimeforConnectingtoaNetwork(P.376) Network 374
Page 383
ChangingtheMaximumTransmissionUnit 1469-073 In most Ethernet networks, the maximum size of a packet that can be sent is 1500 bytes. A packet refers to a chunk of data into which the original data is divided before being sent. The maximum transmission unit (MTU) may vary on each network. Change the settings of the machine as necessary. For more information, contact your Network Administrator. 1TapintheScreen.2Tap. If a screen for entering a PIN is displayed, enter the PIN with the numeric...
Page 384
SettingaWaitTimeforConnectingtoaNetwork 1469-074 When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a mechanism to prevent packets from looping. One effective solution is to de4ne the role of each switch port. However, communication may still be disrupted for several tens of seconds immediately after you change the way that network devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for...
Page 385
Con4gurLngDNS 1469-075 DNS (Domain Name System) provides a service for name resolution that associates a host (or domain) name with an IP address. Con4gure the DNS, mDNS, or DHCP option settings as necessary. Note that the procedures for con4guring DNS are different for IPv4 and IPv6. 1StarttheRemoteUIandlogoninSystemManagerMode.StartingRemote UI(P.450)2Click[Settings/[email protected][NetworkSettings@[TCP/IP[email protected]4gure DNSsettings.Network 377
Page 386
Con4gurLngIPv4DNS1Click [Edit] in [IPv4 Settings].2Con4gure IPv4 DNS settings. Settable options vary depending on the machine model. [DNSSettings@ [PrimaryDNSServerAddress@Enter the IP address of a DNS server. [SecondaryDNSServerAddress@ Enter the IP address of a secondary DNS server, if any. [HostName@ Enter up to 47 alphanumeric characters for the host name of the machine that is to be registered to the DNS server. [DomainName@ Enter up to 47 alphanumeric characters for the name of the...
Page 387
[AcquireHostName@ Select the check box to enable Option 12 to obtain the host name from the DHCP server. [DNSDynamicUpdate@ Select the check box to enable Option 81 to dynamically update the DNS records through the DHCP server. [AcquireSMTPServerAddress@(MF249dw/MF247dw) Select the check box to enable Option 69 to obtain an SMTP server address from the DHCP server. [AcquirePOPServerAddress@(MF249dw/MF247dw)Select the check box to enable Option 70 to obtain a POP3 server address from the...
Page 388
[DNSSettings@ [PrimaryDNSServerAddress@Enter the IP address of a DNS server. Addresses that start with "ff" (or multicast address) cannot be entered. [SecondaryDNSServerAddress@ Enter the IP address of a secondary DNS server, if any. Addresses that start with "ff" (or multicast address) cannot be entered. [UseSameHostName/DomainNameasIPv4@ Select the check box to use the same host and domain names as in IPv4. [HostName@ Enter up to 47 alphanumeric characters for the host...
Page 389
UsingtheoperationpanelDNS settings can also be accessed from in the Screen. IPv4Settings(P.476) IPv6 Settings(P.477) LINKS SettingIPv4Address(P.337) SettingIPv6Addresses(P.340) ViewingNetworkSettings(P.344) Network 381
Page 390
Con4gurLngSMB 1469-076 Server Message Block (SMB) is a protocol for sharing resources, such as 4les and printers, with more than one device in a network. The machine uses SMB to store scanned documents into a shared folder. Depending on your network, you may have to set the NetBIOS name and workgroup name. NetBIOSName In a Windows network that uses NetBIOS, NetBIOS names are used for identifying network-connected computers as well as for 4le sharing and other network services. Most computers use...