Canon printer imageCLASS D1170 User Manual

Fax (D1180/D1170/D1150) 
6-50
ECM Reception
ECM Reception
ECM (Error Correction Mode) reduces the effect of system and line errors on documents that 
occur during sending or receiving with another fax machine that supports ECM. If the other 
machine does not support ECM, this setting is ignored. If reception speed appears to be 
extremely slow, you may be able to speed up reception time by turning ECM off. The default 
setting is .
If you want to communicate using ECM, it is necessary that ECM Reception...

Fax (D1180/D1170/D1150) 
6-51
Optional Settings for FaxTel Mode
Optional Settings for FaxTel Mode
If you select  for the receive mode, you can specify the length of the detection time, 
ring time, and machine’s action after the ringing ends. The default settings are as follows:: 
: 
: 
–
–
–
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S T X / R X   S E T T I N G S
4 
Press  or...

Fax (D1180/D1170/D1150) 
6-52
Optional Settings for FaxTel Mode
9 
Use , , or  –  [numeric keys] to 
specify the duration (15 to 300 seconds) 
of ringing, then press [OK].
                              1 5 S E C F / T   R I N G   T I M E
10
  Press  or  to select , then press [OK].
  3 . F / T   S W I T C H   A C T I O N F A X / T E L   O P T .   S E T
11
  Press  or  to select the action the 
machine will take after the ringing ends, 
then press [OK].
                          R E C E I V E F / T   S W...

Fax (D1180/D1170/D1150) 
6-53
Optional Settings for DRPD Mode
Optional Settings for DRPD Mode
If you select  for the receive mode, you can select the ring pattern assigned by your 
telephone company. The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  4 . R X   S E T T I N G S F A X...

Fax (D1180/D1170/D1150) 
6-54
Setting the Incoming Ring
Setting the Incoming Ring
This function enables you to activate the ring alert of the external telephone if  
is set to  or . Selecting  enables you to distinguish between the fax 
reception and answer voice calls when you pick up the external telephone while it is ringing. 
The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 ....

Fax (D1180/D1170/D1150) 
6-55
Receiving Documents Manually with an External Telephone (Remote RX)
Receiving Documents Manually with an 
External Telephone (Remote RX)
You can connect one external telephone to the machine. When the telephone rings with the 
machine in the Manual receive mode, you can use the external telephone to start receiving 
the document without walking over to the machine. The default settings are as follows:: 
: 
–
–
Activating the Remote Reception
Follow this procedure to turn on...

Fax (D1180/D1170/D1150) 
6-56
Receiving Documents Manually with an External Telephone (Remote RX)
8 
Use  –  [numeric keys] to enter a new 
remote reception ID (a combination of 
two characters), then press [OK].
0 0 R E M O T E   R X   I D
Ex.
9 
Press  [Stop/Reset] to return to the 
standby mode.
Receiving Documents with the 
Remote Reception
Follow this procedure to receive fax documents 
using the remote reception.
Before using the remote reception to receive fax documents, 
make sure the...

Fax (D1180/D1170/D1150) 
6-57
Adjusting the Auto Switch Time
Adjusting the Auto Switch Time
This function enables you to set the machine to switch to document receive mode after 
ringing for a specified length of time in the Manual mode. The default setting is .
This function is only available when the  is set to .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S T X / R X   S E...

Fax (D1180/D1170/D1150) 
6-58
Receive Start Speed
Receive Start Speed
This function enables you to change the receive start speeds, which is useful when there is 
difficulty initiating the receiving of a document. The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
1 0 . S Y S T E M   S E T T I N G S M E N U
If the System Manager ID and System Password 
have been set, enter the System Manager ID and 
System Password using 
 –  [numeric keys], 
then press 
 [Log In/Out]....

Fax (D1180/D1170/D1150) 
6-59
Receiving Documents in Memory without Printing Out (Memory Lock Reception)
Receiving Documents in Memory without 
Printing Out (Memory Lock Reception)
Normally a document prints as soon as you receive it. However, there may be occasions 
when you want the machine to store all documents in memory until you are ready to print 
them. Locking the machine to receive and store all documents in memory is called memory 
lock reception. The default setting is .
1 
Press  [Menu].
2...