Canon printer FAXPHONE L170 User Manual

Paper Handling
4
Print Media Requirements4-2
■Acceptable Paper
* A label that can be loaded in the cassette is a standard type (label standard card) only.
NOTE
•The printing speed may become slower than usual depending on the paper size, the paper type, and the number of sheets you specify. 
This is because the machines safety function works to prevent the failure due to heat.
•Some types of paper may not feed properly into the cassette or the multi-purpose feeder.
Printing Areas
Please note that the...

Paper Handling
4
Loading Paper4-3
Loading Paper
This section describes how to load paper in the cassette and the multi-purpose feeder.
CAUTION
When loading paper, take care not to cut your hands on the edges of the paper.
NOTE
•The paper in the multi-purpose feeder is fed prior to the paper in the cassette.•The cassette holds up to approx. 250 sheets of 17 lb (64 g/m2) paper or approx. 20 envelopes.
When the message  appears in the LCD display, you need to add paper to the paper cassette. 
Here are a few...

Paper Handling
4
Loading Paper4-4
2Pull out the cassette completely.
NOTE
Do not load paper from the rear of the cassette.
3Pinch and slide the length slide guide to fit the size of the paper stack you want to load.
IMPORTANT
If the slide guides are not adjusted correctly for the size of the paper, the quality of your printouts may be adversely affected or jams may 
occur.
4Load the paper stack in the cassette with the print side down.
When you load paper with a logo on, position the paper with the print...

Paper Handling
4
Loading Paper4-5
6Insert the cassette into the machine.
NOTE
If you do not completely insert the cassette into the machine, paper jams may occur.
Do not load paper from the rear of the cassette.
7Specify the paper size and type.
❑Press [Menu] ➞ [Set].
❑Press [ (-)] or [ (+)] to select  ➞ press [Set] twice.
❑Press [ (-)] or [ (+)] to select the appropriate paper size ➞ press [Set] twice.
❑Press [ (-)] or [ (+)] to select the appropriate paper type ➞ press [Set].
❑Press [Stop/Reset] to...

Paper Handling
4
Loading Paper4-6
2Remove any curling from the envelopes by holding the edges diagonally and bending them gently.
3Run a pen or other rounded object along the back flaps to flatten them.
The flaps should not bulge more than 13/64” (5 mm).
4Tap the edges on a flat surface to even the envelopes.
5Pull out the cassette completely.
6Pinch and slide the length slide guide to fit the size of the envelopes you want to load.
IMPORTANT
If the slide guides are not adjusted correctly for the size of...

Paper Handling
4
Loading Paper4-7
8Pinch and slide the width slide guides to fit the envelopes.
Make sure the envelopes do not exceed the load limit mark.
9Insert the cassette into the machine.
IMPORTANT
A maximum of approx. 20 envelopes can be loaded in the cassette. Be sure that the envelopes do not exceed the load limit mark of the 
paper guide. If the envelopes exceed the load limit mark, this may result in misfeeds.
NOTE
If you do not completely insert the cassette into the machine, paper jams may...

Paper Handling
4
Loading Paper4-8
Loading Paper in the Multi-Purpose Feeder
Use the multi-purpose feeder when you want to copy or print on different paper which is in the cassette. Load paper one by 
one in the multi-purpose feeder.
NOTE
The paper in the multi-purpose feeder is fed prior to the paper in the cassette.
1Slide the slide guides to fit the size of the paper you want to load.
IMPORTANT
If the slide guides are not adjusted correctly for the size of the paper, the quality of your printouts may...

Paper Handling
4
Loading Paper4-9
3Specify the paper size.
❑Press [Menu] ➞ press [Set].
❑Press [ (-)] or [ (+)] to select  ➞ press [Set] twice.
❑Press [ (-)] or [ (+)] to select the appropriate paper size ➞ press [Set] twice.
NOTE
•Select ‘ENVELOPE’ for envelopes. For details on loading an envelope in the multi-purpose feeder, see “Loading an Envelope in the 
Multi-Purpose Feeder,” on p. 4-9.
•When  is selected, you can specify vertical and horizontal sizes of the paper in the following ranges:
- : 127...

Paper Handling
4
Loading Paper4-10
2Insert the envelope straightly in the multi-purpose feeder with the print side up and the right edge (i.e., closer to the stamp) 
first.
Envelopes with a flap on the short edge cannot be used.
3Specify the paper size.
❑Press [Menu] ➞ press [Set].
❑Press [ (-)] or [ (+)] to select  ➞ press [Set] twice.
❑Press [ (-)] or [ (+)] to select  ➞ press [Set].
❑Press [ (-)] or [ (+)] to select the appropriate envelope type ➞ press [Set] twice.
NOTE
You can select  instead of  as...

Paper Handling
4
Loading Paper4-11
Orientation of the Document and the Paper Loading
When you load a document in the ADF, the orientation of the document and the orientation of the paper in the cassette or in 
the multi-pur pose feeder are as shown below.
DOCUMENT
COPY
PAPER
CASSETTE MULTI-PURPOSE 
FEEDER