Canon printer Color imageCLASS MF9280Cdn User Manual
Here you can view all the pages of manual Canon printer Color imageCLASS MF9280Cdn User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 71
2-18 Loading Paper Originals and Print Media ■ To print on the back side of preprinted paper ① Load the preprinted paper face up into the stack bypass tray, as shown in the illustration below. The screen for selecting the paper size appears. When loading paper into the stack bypass tray, align the paper stack neatly between the slide guides. If the paper is not loaded correctly, a paper jam may occur.If you are printing on heavyweight paper or envelopes using the stack bypass tray, and find that...
Page 72
2-19 Loading Paper Originals and Print Media ■ If you are loading envelopes into the stack bypass tray: ① Take five envelopes, loosen them as shown, and then stack them together. Repeat this step five times for each set of five envelopes. ② Place the envelopes on a clean, level surface, and press all the way around the envelopes by hand, in the direction of the arrows, to remove any curls. Repeat this step five times for each set of five envelopes. Take particular care to spread the...
Page 73
2-20 Loading Paper Originals and Print Media Load the envelopes face down (flap side up) in the stack bypass so shown below. For top opening envelopes, load them as their sealing side (flap side) is located on the left when viewed from the front. For side opening envelopes, load them so their sealing side (flap side) is located in the back of the stack bypass tray when viewed from the front. The screen for selecting the paper size appears. The stack bypass tray can hold 10 envelopes at a...
Page 74
2-21 Loading Paper Originals and Print Media When prntng paper wth a letterhead or logo (preprnted paper) usng the stack bypass tray: Load the paper in the proper orientation as follows. Portrait orientationLandscape orientation 1-sided printing (When in is set to (the default setting)) For details, see “Introduction of the Machine,” in the e-Manual. (with the printing side facing down)(with the printing side facing down) 1-sided printing (When in is set to ) For...
Page 75
![Page 75
2-22
Setting Paper Size and Type
Originals and Print Media
Setting Paper Size and Type
This section describes how to set paper size and type loaded into the paper drawer(s) and
stack bypass tray.
For the Stack Bypass Tray
You can register a frequently used paper size and type for the stack bypass tray.
The default setting is .
1
Press (Main Menu).
2
Press the right Any key to select
.
3
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].](http://img.usermanuals.tech/thumb/14/919/w300_printer-color-imageclass-mf9280cdn-1478268301_d-74.png "Page 75
2-22
Setting Paper Size and Type
Originals and Print Media
Setting Paper Size and Type
This section describes how to set paper size and type loaded into the paper drawer(s) and
stack bypass tray.
For the Stack Bypass Tray
You can register a frequently used paper size and type for the stack bypass tray.
The default setting is .
1
Press (Main Menu).
2
Press the right Any key to select
.
3
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].")
2-22 Setting Paper Size and Type Originals and Print Media Setting Paper Size and Type This section describes how to set paper size and type loaded into the paper drawer(s) and stack bypass tray. For the Stack Bypass Tray You can register a frequently used paper size and type for the stack bypass tray. The default setting is . 1 Press (Main Menu). 2 Press the right Any key to select . 3 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK].
Page 76
![Page 76
2-23
Setting Paper Size and Type
Originals and Print Media
4
Use [▼], [▲] or (Scroll Wheel) to select
, then press
[OK].
5
Use [▼], [▲] or (Scroll Wheel) to select
, then press the right Any key to
select .
If you do not want to set the stack bypass
standard settings, select , then press [OK],
and press (Main Menu) to return to the
Main Menu screen.
■
If you register a standard paper size:
①
Use [▼], [▲] or (Scroll Wheel) to select
paper size, then press [OK].
You can select from the...](http://img.usermanuals.tech/thumb/14/919/w300_printer-color-imageclass-mf9280cdn-1478268301_d-75.png "Page 76
2-23
Setting Paper Size and Type
Originals and Print Media
4
Use [▼], [▲] or (Scroll Wheel) to select
, then press
[OK].
5
Use [▼], [▲] or (Scroll Wheel) to select
, then press the right Any key to
select .
If you do not want to set the stack bypass
standard settings, select , then press [OK],
and press (Main Menu) to return to the
Main Menu screen.
■
If you register a standard paper size:
①
Use [▼], [▲] or (Scroll Wheel) to select
paper size, then press [OK].
You can select from the...")
2-23 Setting Paper Size and Type Originals and Print Media 4 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 5 Use [▼], [▲] or (Scroll Wheel) to select , then press the right Any key to select . If you do not want to set the stack bypass standard settings, select , then press [OK], and press (Main Menu) to return to the Main Menu screen. ■ If you register a standard paper size: ① Use [▼], [▲] or (Scroll Wheel) to select paper size, then press [OK]. You can select from the...
Page 77
![Page 77
2-24
Setting Paper Size and Type
Originals and Print Media
④ Use [▼], [▲] or (Scroll Wheel) to select
(length for the long edge), then press
.
⑤ Use [▼], [▲] or (Scroll Wheel) to enter
the length for Y (long edge), then press
[OK].
⑥ Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
■ If you register an irregular paper size by
recalling the previously set size:
You can recall the previously set paper size.
For instructions on how to register the
irregular paper size, see...](http://img.usermanuals.tech/thumb/14/919/w300_printer-color-imageclass-mf9280cdn-1478268301_d-76.png "Page 77
2-24
Setting Paper Size and Type
Originals and Print Media
④ Use [▼], [▲] or (Scroll Wheel) to select
(length for the long edge), then press
.
⑤ Use [▼], [▲] or (Scroll Wheel) to enter
the length for Y (long edge), then press
[OK].
⑥ Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
■ If you register an irregular paper size by
recalling the previously set size:
You can recall the previously set paper size.
For instructions on how to register the
irregular paper size, see...")
2-24 Setting Paper Size and Type Originals and Print Media ④ Use [▼], [▲] or (Scroll Wheel) to select (length for the long edge), then press . ⑤ Use [▼], [▲] or (Scroll Wheel) to enter the length for Y (long edge), then press [OK]. ⑥ Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. ■ If you register an irregular paper size by recalling the previously set size: You can recall the previously set paper size. For instructions on how to register the irregular paper size, see...
Page 78
![Page 78
2-25
Setting Paper Size and Type
Originals and Print Media
You can also edit the previously set size or register a new irregular size from this display. Press the right Any key to select → select or → press [OK] → specify the lengths for and → select → press the right Any key to select → select
→ press [OK].
④ Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
6
Use [▼], [▲] or (Scroll Wheel) to select
paper type, then press [OK].
The selectable paper types vary depending on
the...](http://img.usermanuals.tech/thumb/14/919/w300_printer-color-imageclass-mf9280cdn-1478268301_d-77.png "Page 78
2-25
Setting Paper Size and Type
Originals and Print Media
You can also edit the previously set size or register a new irregular size from this display. Press the right Any key to select → select or → press [OK] → specify the lengths for and → select → press the right Any key to select → select
→ press [OK].
④ Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
6
Use [▼], [▲] or (Scroll Wheel) to select
paper type, then press [OK].
The selectable paper types vary depending on
the...")
2-25 Setting Paper Size and Type Originals and Print Media You can also edit the previously set size or register a new irregular size from this display. Press the right Any key to select → select or → press [OK] → specify the lengths for and → select → press the right Any key to select → select → press [OK]. ④ Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 6 Use [▼], [▲] or (Scroll Wheel) to select paper type, then press [OK]. The selectable paper types vary depending on the...
Page 79
![Page 79
2-26
Setting Paper Size and Type
Originals and Print Media
Registering Irregular Paper Sizes for the Stack Bypass Tray
You can register two irregular paper sizes for the stack bypass tray. You can recall the
registered size when you use irregular paper size on the stack bypass tray. For details, see
“Recalling Irregular Paper Size Registered for the Stack Bypass Tray,” on p. 4-17.
1
Press (Main Menu).
2
Press the right Any key to select
.
3
Use [▼], [▲] or (Scroll Wheel) to select
, then...](http://img.usermanuals.tech/thumb/14/919/w300_printer-color-imageclass-mf9280cdn-1478268301_d-78.png "Page 79
2-26
Setting Paper Size and Type
Originals and Print Media
Registering Irregular Paper Sizes for the Stack Bypass Tray
You can register two irregular paper sizes for the stack bypass tray. You can recall the
registered size when you use irregular paper size on the stack bypass tray. For details, see
“Recalling Irregular Paper Size Registered for the Stack Bypass Tray,” on p. 4-17.
1
Press (Main Menu).
2
Press the right Any key to select
.
3
Use [▼], [▲] or (Scroll Wheel) to select
, then...")
2-26 Setting Paper Size and Type Originals and Print Media Registering Irregular Paper Sizes for the Stack Bypass Tray You can register two irregular paper sizes for the stack bypass tray. You can recall the registered size when you use irregular paper size on the stack bypass tray. For details, see “Recalling Irregular Paper Size Registered for the Stack Bypass Tray,” on p. 4-17. 1 Press (Main Menu). 2 Press the right Any key to select . 3 Use [▼], [▲] or (Scroll Wheel) to select , then...
Page 80
![Page 80
2-27
Setting Paper Size and Type
Originals and Print Media
8
Use [▼], [▲] or (Scroll Wheel) to select
(length for the long edge), then
press [OK].
9
Use [▼], [▲] or (Scroll Wheel) to enter
the length for Y (long edge), then press
[OK].
10
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
11
Press the right Any key to select .
If you want to register the other custom paper
size, select or , then repeat
steps 6 to 10.
12
Press (Main Menu) to return to the
Main Menu screen.
You...](http://img.usermanuals.tech/thumb/14/919/w300_printer-color-imageclass-mf9280cdn-1478268301_d-79.png "Page 80
2-27
Setting Paper Size and Type
Originals and Print Media
8
Use [▼], [▲] or (Scroll Wheel) to select
(length for the long edge), then
press [OK].
9
Use [▼], [▲] or (Scroll Wheel) to enter
the length for Y (long edge), then press
[OK].
10
Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
11
Press the right Any key to select .
If you want to register the other custom paper
size, select or , then repeat
steps 6 to 10.
12
Press (Main Menu) to return to the
Main Menu screen.
You...")
2-27 Setting Paper Size and Type Originals and Print Media 8 Use [▼], [▲] or (Scroll Wheel) to select (length for the long edge), then press [OK]. 9 Use [▼], [▲] or (Scroll Wheel) to enter the length for Y (long edge), then press [OK]. 10 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 11 Press the right Any key to select . If you want to register the other custom paper size, select or , then repeat steps 6 to 10. 12 Press (Main Menu) to return to the Main Menu screen. You...