Canon printer Color imageCLASS MF9280Cdn User Manual

Before Using the Machine
1-26
Timer Settings

12
 Use [▼], [▲] or  (Scroll Wheel) to select 
the day of the Week, then press [OK].
13
 Press the right Any key to select .
The End Date Month to End DST screen appears.
14
 Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
15
 Use [▼], [▲] or  (Scroll Wheel) to select 
the month when the daylight saving time 
ends, then press [OK].
16
 Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
17
 Use [▼], [▲] or  (Scroll Wheel) to select...

Before Using the Machine
1-27
Timer Settings
20
 Press the right Any key to select .
21
 Press  (Main Menu) to return to the 
Main Menu screen. 

Before Using the Machine
1-28
Timer Settings 

2-1
 
Originals and Print Media

This chapter describes the types of paper and originals that can be used with the machine and how to load paper into the stack bypass tray.
Originals Requirements ..............................................2-2
Scanning Area  ..............................................................2-3
Placing Originals  ..........................................................2-4
On the Platen Glass  .............................................................2-4
In the Feeder...

2-2
Originals Requirements
Originals and Print Media

Originals Requirements
Available original type, size, weight and quantity are shown in the table below.
Platen GlassFeeder
TypeSheet*1, book, three-dimensional objectsSheet
Size (W × L)Max. 8 1/2" × 14"
(Max. 215.9 mm × 355.6 mm)Max. 14" × 8.5" (355.6 mm × 215.9 mm)*2
Min. 5" × 5.5" (128 mm × 139.7 mm)*2
Weight
Max. 4.4 lb (2 kg)One-sided scanning (1 page): 13 to 34 lb (50 to 
128 g/m2)*3
One-sided scanning (more than 2...

2-3
Scanning Area
Originals and Print Media

Scanning Area
Make sure your originals' text and graphics fall within the shaded area in the following 
diagram. Note that the margin widths listed are approximate and there may be slight 
variations in actual use.
Copy Scanning Area
Fax Scanning Area
Ô
Ô 

2-4
Placing Originals
Originals and Print Media

Placing Originals
Place your originals on the platen glass or into the feeder, depending on the size and type 
of the original, and the copy modes that you want to use.
On the Platen Glass
Place the originals on the platen glass when copying bound originals (such as books and magazines), heavy or 
lightweight originals, and transparencies.
1 
Lift up the feeder.
2 
Place your original face down.
3 
Align the original with the appropriate 
paper size...

2-5
Placing Originals
Originals and Print Media

4 
Gently close the feeder.
The original is ready for scanning.
Remove the original from the platen glass when scanning is complete.
In the Feeder
Place the originals into the feeder when you want to copy several originals at the same time, and press  
(Start). The machine automatically feeds the originals to the scanning area and scans them.
1 
Fan the originals stack and even the 
edges.2 
Adjust the slide guides to the width of the 
originals. 

2-6
Placing Originals
Originals and Print Media
3 
Neatly place the originals face up in the 
original supply tray.
The originals are ready for scanning.
Do not add or remove originals while they are being scanned.When scanning is complete, remove the originals from the originals delivery tray to avoid paper jams.Avoid using feeder to scan the same originals more than 30 times. When scanned repeatedly, originals can become folded or torn, which may cause paper jams.If the feeder rollers are soiled from...

2-7
Paper Requirements
Originals and Print Media

Paper Requirements
The paper size and types that can be used with this machine are shown in the following table. 
Paper drawer(s)Stack bypass tray
Size (W × L)Legal*9, Letter*9, Oficio, M-Oficio, 
B-Oficio, Executive, Foolscap*9, 
A4*9, B5, A5
3" × 5" to Legal (8 1/2" × 14")  
(76.2 × 127 to 215.9 mm × 
355.6 mm) (Always set vertically.)
Weight 16 to 32 lb (60 to 120 g/m2)16 to 47 lb (60 to 176 g/m2)
QuantityMax. 250 sheets *1 *8Max. 100...